The radiation of a rectangular power-bus structure at multiple cavity-mode resonances

The radiation from power-bus structures on high-speed printed circuit boards due to the switching noise current of digital integrated circuits is investigated. The study is based on an analytical cavity-resonator model for a rectangular parallel-plate structure. Based on the application of the field-equivalence principle, the radiated field is calculated from the electric edge-field distribution. For typical board dimensions, several cavity-mode resonances occur within the typical frequency range of interest, leading to relatively high maximum values for radiated emission. The evaluation of the radiation patterns reveals that all (0, nth) resonances have equal maximum amplitudes in the whole mode spectrum. This allows the setting up of an engineering equation for quantifying the noise-current-related maximum radiated field strength, including the dielectric and ohmic loss. Among all geometrical and material parameters, the dielectric thickness is one of the most effective ones to control radiated emission. The theoretical results are well confirmed by accurate measurements carried out in an anechoic room.     

Profiling Voids Embedded in a Slab by a Non-Linear Model

In this paper, by applying a non linear model for the electromagnetic inverse scattering, a technique for the dielectric profiling of a planarly layered medium is investigated and applied to void localization and diagnostics inside a homogeneous lossless slab (one-dimensional geometry). Data are collected under plane wave multifrequency normal incidence. Suitable finite dimensional representations for the unknown functions are introduced and their influence on the model is discussed. The resulting functional equation is solved by the method of weighted residuals and the solution algorithm amounts to minimizing a non quadratic function, where particular attention is devoted to reduce the occurrence of local minima. Finally, the inversion algorithm is validated by applications to both simulated and experimental data.     

On regular drawn symbolic picture languages

Drawn symbolic pictures are an extension of drawn pictures obtained by associating a symbol from an alphabet to each point of the picture. In the paper we will address some new interesting issues derived from the introduction of the symbols and we will identify the conditions, which ensure the preservation of properties holding for drawn pictures in the setting of the proposed extension.     

Photovoltaic characterization of amorphous hydrogenated and chlorinated silicon films

Hydrogenated and chlorinated silicon films were used to deposit Schottky barrier solar cells. Photovoltaic characterization, together with the results of electronic transport measurements, led to the conclusion that the presence of chlorine is detrimental to the properties of this kind of device.     

Spontaneous erythroid colony formation as the clue to an underlying myeloproliferative disorder in patients with Budd-Chiari syndrome or portal vein thrombosis

Results from this laboratory have shown that bone metabolism is directly related to extracellular pH and that high concentrations of tobramycin released from impregnated polymethylmethacryrate (PMMA) beads has pH-dependent toxic effects on bone. In the present study, beneficial effects of calcium hydroxide-impregnated PMMA were investigated regarding tobramycin toxicity and bone metabolism in chick embryo tibiae in vitro. Also using Ca(OH)2 as a pH regulator, the antibiotic efficacy of tobramycin-impregnated PMMA was evaluated with respect to inhibition of Staphylococcus aureus growth. When Ca(OH)2 was added to PMMA beads containing tobramycin, the beads released hydroxyl and calcium ions into the culture medium and released more antibiotic than beads containing only tobramycin. Bone metabolism (glycolysis, total protein synthesis, and collagen synthesis) was enhanced by Ca(OH)2-impregnated beads with or without tobramycin. Additionally, bacterial growth was inhibited more strongly when S. aureus was incubated with tobramycin- and Ca(OH)2-impregnated PMMA disks than with disks containing only tobramycin. This study demonstrates the feasibility of adding Ca(OH)2 to tobramycin-impregnated PMMA beads as a regulator of local pH and a promoter of bone metabolism for protection of bone when high concentrations of tobramycin are used to treat osteomyelitis. It also suggests that lower concentrations of antibiotic may be effective if Ca(OH)2 and tobramycin are administered simultaneously.     

Association between inflammatory bowel disease and sarcoidosis. Report of two cases and review of the literature

BACKGROUND: Common etiopathogenic factors may explain the association of systemic sarcoidosis with inflammatory bowel disease. METHODS: We report two cases of such an association: one of sarcoidosis that developed 2 years after proctocolectomy for ulcerative colitis and one of sarcoidosis and Crohn's colitis. Factors like increased cellular immunity or circulating immunocomplexes or autoantibodies may have a role. Exogenous agents or familiarity may also be involved. CONCLUSIONS: It is postulated that the association between sarcoidosis and inflammatory bowel disease (both ulcerative colitis and Crohn's disease) does not occur by chance alone and that the two conditions may share some genetic or immunologic alterations. The two diseases, however, follow an independent clinical course.     

A compact model for multiterminal bipolar devices used in smartpower applications

Complex technologies merging low-voltage bipolar devices and vertical current-flow power transistor allow more smart functions at low chip cost but pose problems during the design phase because there is no way to predict the influence of the high-voltage transistor over the control components by using standard bipolar junction transistor (BJT) models. In fact the large inductive load usually present in high-voltage power transistors applications forces both negative substrate voltage and spurious currents that can induce positive feedback among parasitic devices, downgrading the performance of a single device and so of the whole circuit. In this work we introduce a model for the five-terminal bipolar devices used in smart power applications. The model accounts for all main static and dynamic parasitic effects and gives results in very good agreement with experimental data on both simple devices and complex integrated circuits currently implemented in commercial products for microprocessor based engine management systems (EMS's)     

Degradation of lincomycin in aqueous medium: Coupling of solar photocatalysis and membrane separation

The photocatalytic oxidation of a common antibiotic, the lincomycin was carried out in aqueous suspensions of polycrystalline TiO₂ Degussa P25 irradiated by sunlight. In order to improve the performance of the lincomycin degradation a hybrid system consisting of a solar photoreactor with the photocatalyst in suspension coupled with a membrane module, used to confine both photocatalyst and pollutants in the reaction environment, was tested.A preliminary study was carried out in order to determine some kinetics parameters of the drug photodegradation. The influence of initial substrate concentration on the lincomycin photooxidation rate was investigated. The photooxidation rate follows a pseudo-first order kinetics with respect to the lincomycin concentration under the used experimental conditions. The presence of the membrane reactor allows the catalyst separation and to operate in continuous mode as the membranes rejection for lincomycin and its oxidation products was quite high.     

Semantic annotation of narrative media objects

This paper addresses the annotation of the narrative features of media objects. Based on a relevant narratological and computational background, we introduce an ontology?Cbased model called Drammar, an annotation schema for the narrative features of media objects based on Drammar and a software tool, Cinematic, for annotating these objects and validating the annotation. Annotated media objects can also be automatically edited into sequences, with the twofold goal of testing the validity of the annotation??through the reconstruction of the baseline sequence??and exploring the possibility of alternative sequences. The software tool encodes both the narrative model and the annotation itself in ontological format, and relies on external ontologies for representing world knowledge and limit the arbitrariness of the annotation. The paper opens the way to the design of a general annotation schema for narrative multimedia with the long?Cterm goal of building large corpora of annotated video material and of bridging the gap between the low?Clevel signal analysis and the high?Clevel semantic representation of the narrative content of the media objects. Finally, the paper illustrates a few projects elaborated with the Drammar annotation and the Cinematic tool, with purposes of artistic research and cross?Cmedia analysis, that provide an empirical validation of the annotation process.