吸湿凉爽机织物的结构设计与性能

为研究织物组织结构与复合纱线线密度对织物凉爽性能的影响,将线密度为7.4和9.8 tex涤纶分别与线密度为7.8 tex锦纶反向加捻、并线后作为纬纱,以8.3 tex涤纶/竹浆纤维50/50混纺纱作经纱,设计平纹、二上一下斜纹和透孔组织织物.测试织物的瞬间接触凉感、热湿舒适性能及织物干、湿态升温曲线,并采用凉爽温度指数对织物的综合凉爽性能进行评价.研究结果表明:6种设计织物的瞬间接触凉感均高于标准,且平纹织物最好,纬纱粗细对瞬间接触凉感影响不显著;透孔织物透气性最好,且在人体出汗的状态下具有较好的导湿散热性能.平纹织物凉爽温度指数最高,最大凉爽温度为2.8℃,综合凉爽性能最好.     

锡磷青铜带材表面黑丝黑点的分析及预防措施

本文通过全面系统的实验分析，确认锡磷青铜带材表面黑丝黑点源于生产过程中硫对铜带表面的污染和腐蚀。提出了预防黑丝黑点的一系列有效措施。采取这些措施后，成材率提高了3％，显著地降低了生产成本，增强了产品的竞争能力。     

基于进化算法的常减压装置模拟

提出了基于优选优生进化算法（Select—best and prepotency evolution algorithm，SPEA）的常减压装置模拟方法。以各塔的温度分布为目标，基于生产过程和分析数据，采用SPEA确定各塔板Murphree效率，从而精确描述各塔板平衡偏离程度。在实际应用中，获得具有良好精度的常减压装置模型。系统分析了SPEA算法的关键参数——优选领域大小与计算复杂性及寻优性能之间的关系，结果显示其取值为群体规模的10％最为合适。     

Blind estimation of OFDM carrier frequency offset via oversampling

Blind deterministic estimation of the orthogonal frequency division multiplexing (OFDM) frequency offset via oversampling is proposed in this paper. This method utilizes the intrinsic phase shift of neighboring sample points incurred by the frequency offset that is common among all subcarriers. The proposed method is data efficient - it requires only a single OFDM symbol to achieve reliable estimation, hence making it more suitable to systems with stringent delay requirement and mobility-induced channel variation. The proposed scheme is devised to perfectly retrieve frequency offset in the absence of noise. Quite remarkably, we show that in the presence of channel noise, this intuitive scheme is indeed the maximum likelihood estimate of the carrier frequency offset. The possible presence of virtual carriers are also accommodated in the system model, and some interesting observations are obtained. The Cramer-Rao lower bound is derived for the oversampling-based signal model, and we show through numerical simulation that the proposed algorithm is efficient. Practical issues such as identifiability, the front-end filter bandwidth, and the possible presence of correlated noises are also carefully addressed.     

光缆接续损耗的工程控制

本从影响光纤损耗的主要因素分析着手，提出了光缆接续损耗工程控制的简洁有效的方法。     

Data-efficient blind OFDM channel estimation using receiver diversity

We investigate non data-aided channel estimation for cyclically prefixed orthogonal frequency division multiplexing (OFDM) systems. By exploiting channel diversity using only two receive antennas, a blind deterministic algorithm is proposed. Identifiability conditions are derived that guarantee the perfect channel retrieval in the absence of noise. In the presence of noise, the proposed method has the desired property of being data efficient-only a single OFDM block is needed to achieve good estimation performance for a wide range of SNR values. The algorithm is also robust to input symbols as it does not have any restriction on the input symbols with regard to their constellation or their statistical properties. In addition, this diversity-based algorithm is computationally efficient, and its performance compares favorably to most existing blind algorithms.     

一种多晶硅高温压力传感器

制作压力传感器时，在二氧化硅层上淀积多晶硅膜，既可利用优良的机械特性，又可保证压敏电阻与衬底间具有良好的绝缘性，由此可大大提高器件的温度特性。介绍了一种多晶硅压力传感器的原理和设计。实验结果表明，这类传感器具有灵敏度好，精度高等特点，电路工作范围为０－２５０℃，且具有良好的温度稳定性。     

一种支持QoS的拓扑自适应动态组播路由算法

YAM、QoSMIC、DSDMR等一类支持QoS的动态组播路由算法允许组播成员动态地加入和离开，同时为接收方提供多个可选择的组播接入路径，以满足不同应用的QoS需求。但这些算法普遍存在控制信令开销大和结点加入时延长，可扩展性不好等问题。本文在分析这些算法的基础上，提出改进的支持QoS的动态组播路由算法，即拓扑自适应动态组播路由（Topology Adaptive Dynamic Multicast Routing，TADMR）算法。该算法避免了以往算法中大部分盲目的路径搜索，并使结点加入时延不再受限于固定的等待时钟，而与网络拓扑相自适应。性能分析和仿真结果表明，该算法具有较低的控制信令开销和结点加入时延，适用于各种网络规模和群组规模，具有良好的可扩展性。     

ZnGa2O4纳米晶的制备和结构表征

采用喷射共沉淀法制备了ZnGa2O4 纳米晶，XRD、SEM和TEM结构分析结果表明，喷射共沉淀法制备的ZnGa2O4的纳米晶颗粒细小均匀，形状完整，与化学共沉淀法相比，粒子尺寸明显减小，小于10nm，同时ZnO杂相峰消失，分析了喷射共沉淀法的机理，并对实验结果进行了解释。     

液晶光阀光电导层光吸收系数的研究

用化学气相沉积法制备了液晶光阀中光电导层———非晶硅薄膜,从实验中得出最佳制备工艺的参数取值。给出了用包络线法测量非晶硅薄膜光吸收系数的原理,测量了样品的光吸收系数随波长的变化规律。得到样品在最佳工艺条件下的光吸收系数高于1×103cm-1。