Processing of Yttria-Alumina Coated Silicon Nitride Slips by Slip Casting

Si₃N₄powders coated with 6 wt% Y₂O₃and 4 wt% Al₂O₃were prepared by coprecipitation. The resulting powders were dispersed in water at different pH values and with addition of various amounts of ammonium polyacrylate (NH₄PA) to produce 32 vol% slips. The influence of the amount of NH₄PA solution added and pH on the rheological properties of 32 vol% coated Si₃N₄slips were studied. In addition, the sintered density of cast samples was determined and related to the degree of slip dispersion. The adsorption of the NH₄PA on the coated particle surface was rather high and the surface became saturated near 0.86 mg/m²at pH 9.2. High NH₄PA concentrations (1.7–3 wt%) were necessary to obtain well dispersed 32 vol% coated Si₃N₄slips at pH 9.2. The best stabilization was obtained with the addition of 2.3 wt% NH₄PA; in this condition, the viscosity reached a minimum value of 35 mPa.s at 100 s^–1. The slip viscosity increased with increasing pH from 9.2 to 10.2. Slips with low viscosities gave a more dense packing of cast samples and consequently higher sintered density values.     

The bone marrow in murine AIDS

In order to increase the understanding of blood cytopenias in HIV infection we have investigated the bone marrow in murine AIDS. C57BL/6 mice infected with the LP-BM5 retrovirus show a decrease in cellularity, numerous haemophagocytic histiocytes, a reduction of all erythroid precursor cells, an increase in eosinophil number and an increase in lymphocytes. Immunostaining with an anti-Pr60gag antibody shows that the majority of bone marrow cells express the viral protein. Thus, the bone marrow in MAIDS has many similarities with the bone marrow from patients with advanced AIDS and may prove useful as a model for therapy aimed at treating blood cytopenias.     

Application of Romero García method to the degradation process of DGEBA/ETDA filled with ultra fine metallic copper

Summary The thermal properties of an epoxy resin (diglycidyl ether Bisphenol A, DGEBA) cured with a primary amine (ethylenediamine, ETDA) and filled with 10, 20 and 30 wt. % of ultra fine copper particles were analyzed. The thermal results were evaluated by means of the Romero-Garcia method, which allowed to obtain the resin degradation kinetic parameters, as well as the possible decomposition mechanism. From the obtained results is possible to infer that higger copper content strongly affects the degradation process of the epoxy resin, which causes a drop off on the composites thermal stability. This behavior could be attributed to water presence, being this effect less pronounced for the resin with 10 wt. % copper and unfilled resin. Regarding to decomposition mechanism, three way transport showed the best correlation for all samples.     

EGF/EGF-R system and benign breast disease during and following the treatment of gynaecological pathologies with an analogue of LH-RH

Clinical and pathological changes of the mammary gland have been studied in 64 women affected by symptomatic Benign Breast Disease (BBD) coexisting with endometriosis or uterine leiomyomata. These patients were rendered hypoestrogenic by subcutaneous administration of the LH-RH analogue Goserelin depot [D-ser (tBu)6 Aza-Gly10-GnRH (ICI118630)] performed every 28 days, for six months. They were evaluated clinically and ultrasonographically before and after treatment to find possible changes of BBD as well as of endometriosis or uterine leiomyomata. Mammary biopsies were performed before and after treatment in all the patients to study the changes of EGF-R expression. Results showed that clinical improvement is accompanied with a reduction of EGF-R expression.     

CYP154C5 Regioselectivity in Steroid Hydroxylation Explored by Substrate Modifications and Protein Engineering**

CYP154C5 from Nocardia farcinica is a P450 monooxygenase able to hydroxylate a range of steroids with high regio- and stereoselectivity at the 16α-position. Using protein engineering and substrate modifications based on the crystal structure of CYP154C5, an altered regioselectivity of the enzyme in steroid hydroxylation had been achieved. Thus, conversion of progesterone by mutant CYP154C5 F92A resulted in formation of the corresponding 21-hydroxylated product 11-deoxycorticosterone in addition to 16α-hydroxylation. Using MD simulation, this altered regioselectivity appeared to result from an alternative binding mode of the steroid in the active site of mutant F92A. MD simulation further suggested that the entrance of water to the active site caused higher uncoupling in this mutant. Moreover, exclusive 15α-hydroxylation was observed for wild-type CYP154C5 in the conversion of 5α-androstan-3-one, lacking an oxy-functional group at C17. Overall, our data give valuable insight into the structure–function relationship of this cytochrome P450 monooxygenase for steroid hydroxylation.     

DanNet: the challenge of compiling a wordnet for Danish by reusing a monolingual dictionary

This paper is a contribution to the discussion on compiling computational lexical resources from conventional dictionaries. It describes the theoretical as well as practical problems that are encountered when reusing a conventional dictionary for compiling a lexical-semantic resource in terms of a wordnet. More specifically, it describes the methodological issues of compiling a wordnet for Danish, DanNet, from a monolingual basis, and not—as is often seen—by applying the translational expansion method with Princeton WordNet as the English source. Thus, we apply as our basis a large, corpus-based printed dictionary of modern Danish. Using this approach, we discuss the issues of readjusting inconsistent and/or underspecified hyponymy hierarchies taken from the conventional dictionary, sense distinctions as opposed to the synonym sets of wordnets, generating semantic wordnet relations on the basis of sense definitions, and finally, supplementing missing or implicit information.     

Sensitivity of optimal shapes of artificial grafts with respect to flow parameters

The difficulties arising in the numerical solution of PDE-constrained shape optimization problems are manifold. Key ingredients are the optimization strategy and the shape deformation method. Furthermore, the robustness of the optimal shape with respect to simulation parameters is of great interest. In this paper, we consider fluid flows described by the incompressible Navier–Stokes equations. Previous studies on artificial bypass grafts indicated the need for specific constitutive models to account for the non-Newtonian nature of blood; in particular, the constitutive model was shown to affect the solution of the shape optimization problem. We employ a shape optimization framework that couples a finite element solver with quasi-Newton-type optimizers and a Bezier spline shape parametrization. To compute derivatives of the optimal shapes with respect to viscosity, we transform the entire optimization framework by combining the automatic differentiation tools Adifor2 and TAPENADE. We demonstrate the impact of the geometry parametrization and of geometric constraints on the optimization outcome. Finally, we employ the transformed framework to compute the sensitivity of the optimal shape of bypass grafts with respect to kinematic viscosity. The resulting sensitivities predict very accurately the influence of viscosity changes on the optimal shape. The proposed methodology provides a powerful tool to further investigate the necessity of intricate constitutive models by taking derivatives with respect to model parameters.     

Edge and line oriented contour detection: State of the art

We present an overview of various edge and line oriented approaches to contour detection that have been proposed in the last two decades. By edge and line oriented we mean methods that do not rely on segmentation. Distinction is made between edges and contours. Contour detectors are divided in local and global operators. The former are mainly based on differential analysis, statistical approaches, phase congruency, rank order filters, and combinations thereof. The latter include computation of contour saliency, perceptual grouping, relaxation labeling and active contours. Important aspects are covered, such as preprocessing aimed to suppress texture and noise, multiresolution techniques, connections between computational models and properties of the human visual system, and use of shape priors. An overview of procedures and metrics for quantitative performance evaluation is also presented. Our main conclusion is that contour detection has reached high degree of sophistication, taking into account multimodal contour definition (by luminance, color or texture changes), mechanisms for reducing the contour masking influence of noise and texture, perceptual grouping, multiscale aspects and high-level vision information.