磁粉探伤机周向电流单片微机控制器的研制

本文介绍一种新型磁粉探伤机周向电流的单片计算机控制器，文中详细介绍控制器的控制原理，结构，控制程序。该控制器对周向电流采用闭环控制，直接设定磁化电流，可保证电流稳定，电流设定值和实际电流值相差小于１０％，控制器还具有了出错检测，自动退磁功能。     

KuaFu Mission

The KuaFu mission-Space Storms, Aurora and Space Weather Explorer-is an "L1+Polar" triple satellite project composed of three spacecraft: KuaFu-A will be located at L1 and have instruments to observe solar EUV and FUV emissions, and white-light Coronal Mass Ejections (CMEs), and to measure radio waves, the local plasma and magnetic field,and high-energy particles. KuaFuB1 and KuaFu- B2 will bein polar orbits chosen to facilitate continuous 24 hours a day observation of the north polar Aurora Oval. The KuaFu mission is designed to observe the complete chain of disturbances from the solar atmosphere to geospace, including solar flares, CMEs, interplanetary clouds, shock waves, and their geo-effects, such as magnetospheric sub-storms and magnetic storms, and auroral activities. The mission may start at the next solar maximum (launch in about 2012), and with an initial mission lifetime of two to three years. KuaFu data will be used for the scientific study of space weather phenomena, and will be used for space weather monitoring and forecast purposes. The overall mission design, instrument complement, and incorporation of recent technologies will target new fundamental science, advance our understanding of the physical processes underlying space weather, and raise the standard of end-to-end monitoring of the Sun-Earth system.     

太阳风质子束流的演化

太阳神飞船观测表明,太阳风高速流中质子束分量相对于核分量的密度随日心距离增加而增加。提出解释这一观测现象的机理并给出二维数值模拟结果。由于阿尔芬波速随日心距离增加而减少,第二支左旋波将与更多的质子共振,把部分原来属于核分布的质子拉到束分布中来。用数值模拟方程方法求解回旋波共振导致的准线性扩散方程,数值结果与观测结果相符合。     

Research Progress and Aerospace Applications of Shape Memory Alloys

As one of the newly developing intelligent/smart materials, shape memory alloys (SMAs) have become an important material and have broad application prospects. W...     

微型涡轮发动机综合测控系统设计

针对微型涡轮发动机测控要求,设计了集试车、控制系统半物理模拟、电动供油试验功能于一体的综合测控系统.各传感器调理信号并接到测控计算机与电子控制器;电子控制器通过串口接受测控计算机操纵指令,并采集p₂进行转速间接闭环控制.详细介绍了转速测量方法、电动油泵(pulse width modulation,PWM)驱动设计,并分析、设计了发动机控制律.测试软件以Lab Windows/CVI为平台,采用多线程技术设计.应用表明,系统结构简单、试验效率高,可为同类发动机研发提供支持.      

轴流压气机动态失速过程三维计算

基于三维非定常欧拉方程和三维激盘模型发展了一种用于研究轴流压气机动态失速过程的三维计算方法.利用该计算方法研究了某型高压压气机第一级的动态失速过程,并就转子总静压升特性的三种不同径向分布对失速过程的影响进行了分析.计算结果表明该方法能够反映出压气机的三维动态失速过程、失速团的三维空间结构,并能有效地表现出转子沿径向的特性变化对压气机气动稳定性的影响,而且还能够用于判断压气机的危险截面.      

提高铷原子频标短期稳定度的研究

对影响铷原子频标短期稳定度的三个因素进行了分析,在此基础上提出了改善短期稳定度的方法和措施,并通过试验进行了验证,获得改进后的铷原子频标的短期稳定度指标,短期稳定度从7×10^-12／1s提高到1．20×10^-12／1s。     

磁-光/涡流成像技术的有限元分析

近年来迅速发展的磁－光成像（ＭＯＩ）技术使涡流检测技术得到了新的进展。本文运用磁－光／涡流成像的有限元模型对典型的飞机构件缺陷（如连接飞机表面两个铝层的紧固件下面的裂纹）进行模拟。模拟结果表明,其磁场垂直分量的变化对这种结构来说是相当灵敏的,采用ＭＯＩ技术可以用来探测隐藏在紧固件帽下面的缺陷。     

一种通量加权型紧致格式

将通量加权的思想引入到紧致格式中,构造了一个传统方法与紧致格式混合组成的加权型差分格式.利用该格式与二阶TVD格式分别计算了一维方波、组合波问题和一些黎曼问题,如Sod问题和Shu问题,以及一维定常激波问题.计算结果的比较表明加权格式无论在捕捉各种间断,还是在分辨各种复杂波系上,都具有较大的优势,并与精确解非常吻合.      

Assessment of Two Turbulence Models and Some Compressibility Corrections for Hypersonic Compression Comers by High-order Difference Schemes

The Spalart-Allmaras (S-A) turbulence model,the shear-stress transport (SST) turbulenee model and their compressibility corrections are revaluated for hypersonic compression corner flows by using high-...