应用于生物医学的光声光谱技术的改进和实验研究

改进的光声光谱归一化技术，避免了普通的分光法归一化光声光谱技术中分束镜以及锁相放大器动态范围的影响和限制，实现宽光谱范围内准确的光谱测量。氙灯光源功率起伏用修正项修正，误差在5％以内，实现各次实验数据的可比性。     

用于重离子核反应实验测量的纵向电场气体电离室

本文报道了一种新型的大动态范围，多叠层探测器系统组件之一的纵向电场气体电离室的构造，性能和在中能得离子核反应实验中的应用。     

Study of Desorption Agent for LADS Process

This article refers to the procedure for selection, evaluation and development of the LADS-D desorption agent associated with the LADS-A adsorbent used in the non-hydroprocessing adsorptive desulfurization (LADS) process for FCC naphtha developed by LPEC Refining Research Institute. The LADS-D desorption agent can effectively remove the sulfides adsorbed on the LADS-A adsorbent. The saturated LADS-A adsorbent can be instantly regenerated by the LADS-D desorption agent to recover its adsorption activity. The LADS-D desorption agent can not only effectively remove all impurities adsorbed on the adsorbent, but also has strong ability to dissolve the impurities to keep a stable desorption efficiency of adsorbent to be basically commensurate with fresh adsorbent after extended use.     

Compiler-directed scratchpad memory data transfer optimization for multithreaded applications on a heterogeneous many-core architecture

The Journal of Supercomputing - The heterogeneous many-core architecture plays an important role in the fields of high-performance computing and scientific computing. It uses accelerator cores with...     

新型快挥发带电清洗剂对支柱复合绝缘子的溶胀效应及改进

直流硅橡胶绝缘子积污后对其绝缘性能和使用寿命有重要影响,一般通过带电清洗剂进行清洗,而在带电清洗剂下的溶胀效应带来的不利影响是有待解决的关键问题.对1、2号两种带电清洗剂挥发速率、硅橡胶在不同带电清洗剂清洗前后的溶胀性以及憎水性的变化进行了试验研究,并探讨了相应的机制.结果表明:1、2号带电清洗剂在25℃时的挥发速率分别为1095.78 g/(h·m2)和108.01 g/(h·m2);硅橡胶溶胀度随时间的增加而增大,溶胀10 h后达到饱和,饱和后的硅橡胶溶胀指数分别为55％和130％;1号带电清洗剂会削弱硅橡胶的憎水性,经过10 min浸泡,接触角下降了14％,2号带电清洗剂能增强硅橡胶的憎水性,经相同时间浸泡,接触角上升了6％,因而挥发性优良的带电清洗剂可以降低溶胀对硅橡胶绝缘子的不利影响.     

Cooperative effect of crystallization temperature and NaF addition in the formation process and hydrothermal stability of MCM-48 mesoporous molecular sieve

The hydrothermal stability of MCM-48 was conveniently and effectively improved by increasing the crystallization temperature and directly adding NaF to the synthesis gel. The crystallization temperature varied from 373 K to 403 K. The influences of NaF addition, crystallization temperature and crystallization time on the formation process and hydrothermal stability of MCM-48 were systematically studied here to solve the problem of poor reproducibility. Results from XRD patterns indicated that the crystallization temperature and crystallization time were very critical factors for the improvement of the hydrothermal stability besides NaF addition. The formation process of MCM-48 was significantly accelerated and the pore structure ordering was also greatly improved by increasing the crystallization temperature and F⁻/Si ratio. A high hydrothermally stable MCM-48 mesoporous molecular sieve was obtained after being crystallized at 393 K for 36 h in the presence of NaF, which endured the hydrothermal treatment in boiling water at least for 4 days. However, only an amorphous product was obtained when the crystallization temperature was further increased to 403 K. Results from Si MAS NMR, N₂ adsorption isotherms, TEM, Raman spectra and XRD patterns manifested that the improved stability of MCM-48 was attributed to the high silicates condensation degree and the excellent pore structure ordering. The possible reason for the successful formation of hydrothermally stable MCM-48 sample by controlling the crystallization temperature, time and F⁻/Si ratio was explained here.     

多酚氧化酶催化单宁的氧化聚合反应研究

研究了多酚氧化酶催化单宁的氧化聚合反应情况 ,探索了反应条件及 7种化合物对酶活性的抑制效果 ,对产物进行了红外光谱和紫外光谱测试 ,相对粘度法测定了产物的分子量。结果表明 ,反应的最佳条件是pH为 5 .2 9,温度为 3 0℃ ,在所用抑制剂中 ,硫酸铜的抑制作用最强 ,与单宁酸的IR图相比 ,产物的 -OH吸收带变窄 ,在 12 60cm-1处吸收峰增强 ,而紫外吸收无变化。产物平均分子量为 3 5 41,说明多酚氧化酶能催化单宁的氧化聚合     

工艺参数对陶瓷注射成型的影响与分析

本研究通过改变注射温度，注射压力，保压压力等几个主要参数，对形状，体积不同的注射成型体，试条，圆柱及子部件进行了一系列注射工艺实验。相应地对成型体的密度，弯曲强度及烧结体的密度和强度进行测量，并从陶瓷注射成型混合物的流动行为，热物理特性方面对注射这一复杂过程进行分析，探讨工艺参数对成型过程的内在影响，从而确定合理的注射工艺条件。     

Synergistic effects of doped Fe3+ and deposited Au on improving the photocatalytic activity of TiO2

Fe³⁺ doped together with Au deposited TiO₂ (Au/Fe³⁺–TiO₂) was successfully prepared, which shows excellent photocatalytic activity for degradation of methyl orange (MO) under both UV and visible light (λ > 420 nm) illumination. Fe³⁺ has been confirmed by EPR to substitute for Ti⁴⁺ in the TiO₂ lattice, and Au exists as Au⁰ on the surface of the photocatalyst indicated by the results of XRD. Fe³⁺ and Au have synergistic effects on improving the photocatalytic activity of TiO₂. A proposed mechanism concerning the synergistic effects is discussed to explain the improvement of the photocatalytic activities.     

超高交联树脂吸附处理2,4-D含酚废水的研究

采取超高交联树脂NDA-150吸附处理2,4-二氯苯氧乙酸含酚生产废水,取得了良好的效果。通过静态吸附比较和动态吸附-脱附研究,确定了最佳工艺参数。原废水呈深红褐色,总酚质量浓度>16000mg/L,树脂吸附后出水无色透明,总酚质量浓度<0.5mg/L,达到国家排放标准。原废水酸化和高浓脱附液酸化处理,能回收大量的2,4-二氯酚和2,4-二氯苯氧乙酸。该工艺简单,操作方便,是一项具有环境效益和经济效益,值得推广的技术。