CPLD技术及其在现代时统中的应用

对CPLD(复杂可编程逻辑器件)技术的基本特征和发展趋势作了简要介绍,揭示了该技术在现代数字系统中的重要地位及作用.利用CPLD对时统设备IRIG-B码产生器进行集成,其实验结果表明,集成了的B码产生器不但简单、可靠,而且便于调试,克服了以往硬件电路复杂的缺点.     

Numerical prediction of blast‐induced stress wave from large‐scale underground explosion

This paper presents a numerical model for predicting the dynamic response of rock mass subjected to large‐scale underground explosion. The model is calibrated against data obtained from large‐scale field tests. The Hugoniot equation of state for rock mass is adopted to calculate the pressure as a function of mass density. A piecewise linear Drucker–Prager strength criterion including the strain rate effect is employed to model the rock mass behaviour subjected to blast loading. A double scalar damage model accounting for both the compression and tension damage is introduced to simulate the damage zone around the charge chamber caused by blast loading. The model is incorporated into Autodyn3D through its user subroutines. The numerical model is then used to predict the dynamic response of rock mass, in terms of the peak particle velocity (PPV) and peak particle acceleration (PPA) attenuation laws, the damage zone, the particle velocity time histories and their frequency contents for large‐scale underground explosion tests. The computed results are found in good agreement with the field measured data; hence, the proposed model is proven to be adequate for simulating the dynamic response of rock mass subjected to large‐scale underground explosion. Extended numerical analyses indicate that, apart from the charge loading density, the stress wave intensity is also affected, but to a lesser extent, by the charge weight and the charge chamber geometry for large‐scale underground explosions. Copyright © 2004 John Wiley & Sons, Ltd.     

Isotopic studies of leaf water. Part 1: A physically based two-dimensional model for pine needles

Understanding of isotopic variations in leaf water is important for reconstruction of paleoclimate and assessment of global biochemical processes. We report here a study of isotopic distributions within a single needle of two pine species, Pinus resinosa Ait and Pinus strobes L., with the objective of understanding how isotopic compositions of leaf water are controlled by environmental and physiological variables. A 2D model was developed to simulate along-leaf isotopic variations and bulk leaf water isotopic compositions. In addition to variables common to all leaf water isotopic models, this 2D model also takes into account the specific geometry and dimensions of pine needles and the isotopic transport in xylem and mesophyll. The model can successfully simulate oxygen isotopic variations along a single needle and averaged over a leaf (bulk leaf water). The simulations suggest that isotopic composition of the bulk leaf water does not always depend only upon the average transpiration rate, which in turn raises questions about using leaf water isotopic values to estimate transpiration rates. An unsuccessful attempt to simulate along-needle hydrogen isotopic variations suggests that certain unknown biological process(es) may not have been incorporated into our 2D model, and if so, it calls for a reevaluation of all other models for hydrogen isotopic simulations of leaf water since they too lack these processes.Existing leaf water isotopic models are reviewed in this work. In particular, we evaluate the most frequently used model, the stomatal boundary layer model (also referred to as the Craig-Gordon model). We point out that discrepancy between the boundary layer model and the measured bulk leaf water seems to depend upon relative humidity. Using our 2D model, we show that this humidity dependency is a result of an interplay between environmental and physiological conditions: if the transpiration rate of plant leaves decreases with increasing relative humidity, our 2D model can reproduce the pattern of isotopic discrepancy between boundary layer model predictions and observations, enabling us to understand better the reason behind this discrepancy.     

基于分块分形编码的多姿态、表情人脸图像检索

利用图像分形编码中定义域块和最小均方误差一一对应的特点，提出了1种基于分形编码的多姿态、表情的人脸图像检索方法。该方法将待检索图像分割为相同大小的值域块，然后将每一值域块按给定的定义域块进行分形编码，得到最小均方误差，计算该最小均方误差与图像库中最小均方误差的欧氏距离。将待检索图像所有值域块的欧氏距离求平均，此平均欧氏距离较小的几幅图像即为检索出的图像。实验证明该方法能够准确地检索出图像库中存储的同一人的不同姿态、表情的图像。     

黄海海域陆相中生界地震反射特征及靶区优选

利用前人对黄海海域油气勘探成果，作者对北黄海盆地，南黄海盆地北部坳陷陆相中生界进行了研究。结果认为：黄海海域陆相中生界分布广、厚度大、具有良好的生、储、盖组合，是该区下步油气战略性调查的首选目标。并提出北黄海陆相中生界油气勘探应以东部凹陷为主，同时兼顾中部凹陷。南黄海北部坳陷近期油气勘探重点应选择北部凹陷和加大东北凹陷的研究力度。南黄海南部坳陷陆相中生界油气勘探重点放在南五和南七凹陷。     

哀牢山-红河断裂带中段应变分析

对哀牢山—红河断裂带中段和平—水塘剖面、墨江—元江剖面和其它地段的岩石应变及磁组构进行了分析，表明应变强度的校正磁各向异性度PJ从断裂带向西至三叠系明显降低，变形强度向西迅速减弱。磁化率椭球体主轴展布反映出剪切带内、外变形方式的改变。剪切带内，以水平走滑运动为主；向西则以水平缩短为主。在应变分析中，对断裂带内的S—C组构两组面理夹角、杏仁体和石榴石应变标志体进行了测量，结果显示，剪切带内的磁组构和岩石组构间关系较差。此外，还对这两条剖面中的三叠系进行了应变和磁组构分析，找出了它们与磁化率椭球体对应轴率间的相关性。     

城市景观三维重建中的三角剖分算法

在构建城市景观时,为了快速精确地重建建筑物、绿地、河流等三维模型,提高自动化程度,缩短建设周期,需对用户采集的矢量地物数据进行三角剖分,再以OpenGL重绘三维模型。本文提出了一种对多边形进行三角剖分的递归分割算法,并以VisualC++实现,以实际的4万多个建筑物进行三角剖分实验,充分证明其是有效的。     

测井仪器的故障分析与排除思路

TYSC-3Q与PSJ-2型数字测井仪是目前煤田测井中常用的二种测井仪器,在使用过程中难免发生诸如测井控制故障、声速探管故障、密度三侧向探管故障、井温、井液电阻率探管故障、电法面板故障、数字测井面板故障、电测井故障等常见故障类型。通过对各类故障因素进行剖析,指出了故障易发生的部位,并详细的介绍了检查的方法及故障的排除步骤。     

《干旱区地理》的引文统计分析

本文使用文献计量学中的引文分析方法,以《干旱区地理》为调查样本进行了统计分析。《干旱地理》１９８５－１９９４年共版４３期,刊登论文５５８篇,其中附有引文的论文４３６篇,引文２７６６条。     

虚拟样机技术在地质工程机械领域的应用研究

基于对国内地质工程机械的研发现状的考虑，根据虚拟样机技术的特点，讨论了在地质工程机械领域实施虚拟样机技术的必要件，并提出了建立地质工程机械虚拟样机的策略。联合PRO／E、ANSYS及ADAMS建立了气动潜孔锤的虚拟样机模型，对气动潜孔锤虚拟样机进行了仿真，阐明了虚拟样机技术在地质工程机械领域的应用前景。