Magnetite Dyke in Precambrian Banded Iron Formation,Singhbhum Craton,India: Mineralogical and Chemical Characteristics

Banded iron formation (BIF) of the Gorumahisani–Sulaipat–Badampahar (GSB) belt in Singhbhum Craton, India, consists predominantly of magnetite. This BIF is intruded by a magnetite dyke. The magnetite dyke is massive and compact with minor sulphide minerals while the host banded magnetite ore, a component of the BIF, shows thin lamination. The magnetite ore of the dyke is fine to medium grained and exhibits interlocking texture with sharp grain boundaries, which is different from the banded magnetite that is medium to coarse grained and show irregular martitised and goethitised grain boundaries. Relics of Fe–Ca–Mn–Mg‐carbonate and iron silicates (grunerite and cummingtonite) are observed in the banded magnetite. The intrusive magnetite is distinctly different in minor, trace and REE geochemistry from the banded magnetite. The banded magnetite contains higher amounts of Si, Al, Mn, Ca, Mg, Sc, Ga, Nb, Zr, Hf, Co, Rb and Cu. In contrast, the massive magnetite is enriched in Cr, Zn, V, Ni, Sr, Pb, Y, Ta, Cs and U with higher abundance of HREE. In the chondrite normalized plot, the massive magnetite shows a slight positive Eu anomaly while the banded ore does not show any Eu anomaly. Field disposition, morphology, mineralogy and chemistry show that the intrusive magnetite dyke is of igneous origin, while magnetite in BIF formed from a carbonate protolith through the process of sedimentation.     

Accumulation of sediment,organic matter and trace metals with space and time,in a creek along Mumbai coast,India

Two core sediment samples; one from inner part (ManI) and the other closer to the mouth (ManII); were collected from the intertidal regions of Manori, a tidally influenced creek near Mumbai, India. Both the cores were subjected to various geochemical analyses to determine parameters such as pH, sediment components, total organic carbon, total nitrogen, total phosphorus and selected metals viz., Fe, Mn, Cu, Pb, Co, Ni, Zn, Cr, Al, Ca and V. Analysis of ²¹⁰Pb activity was employed to assess the sediment deposition trend of the area. The data was further processed using factor and cluster analyses. The results indicate that the sediments from site ManI, had finer sediment composition, higher porosity, organic matter and metal contents but exhibited an erratic decline in ²¹⁰Pb activity downcore. Also ManI showed higher C:N ratio and enrichment factor values as compared to site ManII. The inner area (ManI) probably received a greater input of organic matter from the erosion of terrestrial matter as well as domestic and industrial discharge. Sediments from site ManII had typical marine organic matter composition (lower C:N ratio). The concentration of metals at this site was also low indicating the contents were getting diluted by freshwater and seawater mixing.     

Hydraulic and compaction characteristics of leachate-contaminated lateritic soil

Large quantities of leachate-contaminated lateritic soil results from dump yards in the southwest coast of India. These dump yards receive large quantities of municipal solid waste which includes chemical, industrial and biomedical wastes. Large areas of land are currently being used for this purpose. An extensive laboratory testing program was carried out to determine the compaction characteristics and hydraulic conductivity of clean and contaminated lateritic soil. Batch tests were used to study the immediate effect of leachate contamination on the properties of lateritic soil. Contaminated specimens were prepared by mixing the lateritic soil with leachate in the amount of 5%, 10% and 20% by weight to vary the degree of contamination. The results indicated a small reduction in maximum dry density and an increase in hydraulic conductivity due to leachate-contamination. The change induced by chemical reaction in the microstructure of the soil was studied by scanning electron microscope before and after contamination of soil with leachate. The structure of the leachate contaminated soil sample appeared to be aggregated in scanning electron microscope analysis. The aggregated structure increases the effective pore space and thus increases the hydraulic conductivity. Fifty percent increase in hydraulic conductivity was observed for specimens prepared at standard Proctor density and mixed with 20% leachate. Compaction characteristics did not change much with the presence of leachate up to 10%. With 20% leachate the maximum dry density decreased slightly indicating excess leachate in the soil. However the changes are not significant.     

Impact of the tsunami and earthquake of 26th December 2004 on the vital coastal ecosystems of the Andaman and Nicobar Islands assessed using RESOURCESAT AWiFS data

Tsunami waves struck the Indian coast on 26th December 2004 affecting the Andaman and Nicobar group of islands. A quick assessment of the status of the vital coastal ecosystems has been made using pre- and post-tsunami Advance Wide Field Sensor (AWiFS) data of Indian satellite RESOURCESAT with an accuracy of 87–90% and the Kappa ranging from 0.8696 to 0.9053. Among the coastal ecosystems the coral reefs have suffered the maximum with the Nicobar reefs (69% eroded and 29% degraded) bearing the brunt more than the Andaman reefs (54% eroded and 22% degraded). Significant improvement to the condition of the reef damaged due to backwash has been noted. About 41% of the Sentinel reef area has undergone significant improvement. The continuance of the erosion of the southwestern Andaman reefs is due to the impact of recurring earthquakes. The impact on mangroves of both the groups of islands has been due to uprooting as well as inundation of seawater and resulting stagnation. Changes are expected in community structure of mangroves as a result of tsunami.     

Hydrography of the eastern Arabian Sea during summer monsoon 2002

Hydrographic observations in the eastern Arabian Sea (EAS) during summer monsoon 2002 (during the first phase of the Arabian Sea Monsoon Experiment (ARMEX)) include two approximately fortnight-long CTD time series. A barrier layer was observed occasionally during the two time series. These ephemeral barrier layers were caused byin situ rainfall, and by advection of low-salinity (high-salinity) waters at the surface (below the surface mixed layer). These barrier layers were advected away from the source region by the West India Coastal Current and had no discernible effect on the sea surface temperature. The three high-salinity water masses, the Arabian Sea High Salinity Water (ASHSW), Persian Gulf Water (PGW), and Red Sea Water (RSW), and the Arabian Sea Salinity Minimum also exhibited intermittency: they appeared and disappeared during the time series. The concentration of the ASHSW, PGW, and RSW decreased equatorward, and that of the RSW also decreased offshore. The observations suggest that the RSW is advected equatorward along the continental slope off the Indian west coast.     

Influence of salinity on permeability characteristics of marine sediments

Abstract

Laboratory tests were conducted on compacted marine sediments to study the effect of salt concentration of permeating fluid on its permeability characteristics. Deep sea sediment samples were collected from water depths varying from 3700 to 4500 m off Mauritius coast. Liquid limit and plasticity index varied widely from 45 to 75 and 10 to 35, respectively. Permeability was found at different void ratios with distilled water and 0.2, 0.4, and 0.8 N NaCl solutions as permeating fluid. It was found that permeability increases with an increase in salt concentration for a given void ratio. This is explained by diffused double layer theory. Also, the rate of increase in permeability decreases with increase in salt concentration. The effect of salt concentration seemed to be less at higher void ratios.     

Brackish water aquaculture site selection in coastal track of cannanore (Kerala) using remote sensing and GIS techniques

Aquaculture has emerged as one of the fast growing industries in the developing countries both for domestic consumption as well as for the export. This industry not only generates foreign exchange to the country but also provides employment opportunities to the skilled and unskilled rural poor. On the other hand, aquaculture has also some negative impacts on the environment which are mainly due to conversion of mangroves and agricultural, salination of surface water resources and agricultural land at some places besides causing pollution and diseases. All the major shrimp farming countries of the world have faced environmental problem due to intensification, improper and uncontrolled planning by greed and unlimited profit motives of a section of aquaculture community. In view of this, a proper environmental management is a basic need to sustain the industry in the long run. Selection of a suitable site in the coastal areas is the first and the foremost step which is a crucial factor in determining the success of shrimp farming. The present paper discusses the selection of brackish water aquaculture sites using remote sensing satellite data and GIS on the Cannanore coast. Different aquaculture sites in the area were evaluated using a GIS package. Finally a prioritization map showing the sites in the descending order of their priority was generated.     

TitaniQ under pressure: the effect of pressure and temperature on the solubility of Ti in quartz

Quartz and rutile were synthesized from silica-saturated aqueous fluids between 5 and 20 kbar and from 700 to 940°C in a piston-cylinder apparatus to explore the potential pressure effect on Ti solubility in quartz. A systematic decrease in Ti-in-quartz solubility occurs between 5 and 20 kbar. Titanium K-edge X-ray absorption near-edge structure (XANES) measurements demonstrate that Ti⁴⁺ substitutes for Si⁴⁺ on fourfold tetrahedral sites in quartz at all conditions studied. Molecular dynamic simulations support XANES measurements and demonstrate that Ti incorporation onto fourfold sites is favored over interstitial solubility mechanisms. To account for the P–T dependence of Ti-in-quartz solubility, a least-squares method was used to fit Ti concentrations in quartz from all experiments to the simple expression

Analysis of estuarine colour components during non-monsoon period through Ocean Colour Monitor

Simultaneous acquisition of water samples, radiance and irradiance measurements were carried out from 40 stations in the Mandovi–Zuari estuaries during February to May 2002. From the samples collected, inherent and apparent optical properties (IOP and AOP) such as absorption coefficient (a), upwelling diffuse attenuation coefficient (k_u) and subsurface reflectance (R) were derived. Using these optical properties, radiative transfer at each water column is examined. On the basis of the radiative transfer outcome, band-ratio algorithms are derived for three optically active substances (OAS), viz, chlorophyll-a, suspended sediment and coloured dissolved organic matter (CDOM). The respective algorithms are 670/555, 490/670 and 412/670 nm for chlorophyll-a, suspended sediment and CDOM. These algorithms are applied to Ocean Colour Monitor (OCM), onboard Indian Remote Sensing Satellite (IRS)-Polar Satellite Launch Vehicle (P4), scenes (digital data), to synoptically analyze these OAS. The synoptic analysis of OAS revealed different hydrodynamic characteristics of the estuaries during non-monsoon seasons.