Growth of the Mediterranean Gorgonian Lophogorgia ceratophyta (L., 1758)

Abstract. Growth of the shallow-water gorgonian Lophogorgia ceratophyta was investigated in an infralittoral station located in La Spezia Gulf, Ligurian Sea. Mean annual height growth rate was estimated to be 2.57 cm · a^-1. The fractal dimension of the colonies was found to gradually evolve in complexity, exhibiting a simpler branching pattern in younger specimens. The maintenance of a low, invariable ramification complexity as an optimal choice in managing relationships between water and the colony's living tissues is also discussed.     

The restricted problem of n+ν bodies

The simplest, conventional, and original form of the circular restricted problem of three bodies is briefly described in sidereal and synodic systems using dimensional and non-dimensional variables. This dynamical system is generalized to n2 primary bodies (from n=2) with masses M_i, 1in, interacting with arbitrary force laws (instead of only gravitational forces). The number of bodies of small mass mM_i not perturbing the primaries is increased from =1 to 1 where 1 and the minor bodies are allowed to interact with one another under arbitrary force laws. While the minor bodies (m) do not affect the motions of the primaries (M_i), the primaries influence the motions of the minor bodies with arbitrary force laws.For the case where n=2, 1, and only gravitational forces act on the system, an integral of the system is derived. It is shown that the energy integral of the general problem of N bodies and the Jacobian integral of the classical restricted problem of three bodies are limiting cases of this integral. The role of the integral in bounding the motion of the minor bodies is discussed. Several applications of this system are given.     

The Singapore River thematic zone: sustainable tourism in an urban context

This paper explores the concept of sustainable tourism and how it applies to urban destinations such as Singapore. As tourism is an important industry in Singapore, in terms of employment, business activity and an income generator, the Singapore Tourism Board is continuously looking at potential avenues to make Singapore a competitive destination. We examine the use of thematic zones in Singapore as a strategy to achieve its ambition of becoming a tourism capital of the world. By focusing on a case study of the Singapore River thematic zone (one of the 11 thematic zones identified by the Singapore Tourism Board), we assess the viability of thematic zones in ensuring sustainable urban tourism. The paper closes with some theoretical reflections and policy implications arising from our key findings.     

6: Classification of VMS deposits: Lessons from the South Uralides

VMS deposits of the South Urals developed within the evolving Urals palaeo-ocean between Silurian and Late Devonian times. Arc-continent collision between Baltica and the Magnitogorsk Zone (arc) in the south-western Urals effectively terminated submarine volcanism in the Magnitogorsk Zone with which the bulk of the VMS deposits are associated. The majority of the Urals VMS deposits formed within volcanic-dominated sequences in deep seawater settings. Preservation of macro and micro vent fauna in the sulphide bodies is both testament to the seafloor setting for much of the sulphides but also the exceptional degree of preservation and lack of metamorphic overprint of the deposits and host rocks. The deposits in the Urals have previously been classified in terms of tectonic setting, host rock associations and metal ratios in line with recent tectono-stratigraphic classifications. In addition to these broad classes, it is clear that in a number of the Urals settings, an evolution of the host volcanic stratigraphy is accompanied by an associated change in the metal ratios of the VMS deposits, a situation previously discussed, for example, in the Noranda district of Canada.Two key structural settings are implicated in the South Urals. The first is seen in a preserved marginal allochthon west of the Main Urals Fault where early arc tholeiites host Cu–Zn mineralization in deposits including Yaman Kasy, which is host to the oldest macro vent fauna assembly known to science. The second tectonic setting for the South Urals VMS is the Magnitogorsk arc where study has highlighted the presence of a preserved early forearc assemblage, arc tholeiite to calc-alkaline sequences and rifted arc bimodal tholeiite sequences. The boninitc rocks of the forearc host Cu–(Zn) and Cu–Co VMS deposits, the latter hosted in fragments within the Main Urals Fault Zone (MUFZ) which marks the line of arc-continent collision in Late Devonian times. The arc tholeiites host Cu–Zn deposits with an evolution to more calc-alkaline felsic volcanic sequences matched with a change to Zn–Pb–Cu polymetallic deposits, often gold-rich. Large rifts in the arc sequence are filled by thick bimodal tholeiite sequences, themselves often showing an evolution to a more calc-alkaline nature. These thick bimodal sequences are host to the largest of the Cu–Zn VMS deposits.The exceptional degree of preservation in the Urals has permitted the identification of early seafloor clastic and hydrolytic modification (here termed halmyrolysis sensu lato) to the sulphide assemblages prior to diagenesis and this results in large-scale modification to the primary VMS body, resulting in distinctive morphological and mineralogical sub-types of sulphide body superimposed upon the tectonic association classification.It is proposed that a better classification of seafloor VMS systems is thus achievable using a three stage classification based on (a) tectonic (hence bulk volcanic chemistry) association, (b) local volcanic chemical evolution within a single edifice and (c) seafloor reworking and halmyrolysis.     

Conditions of pocket formation in the Oktyabrskaya tourmaline-rich gem pegmatite (the Malkhan field, Central Transbaikalia, Russia)

Coexisting melt (MI), fluid-melt (FMI) and fluid (FI) inclusions in quartz from the Oktaybrskaya pegmatite, central Transbaikalia, have been studied and the thermodynamic modeling of PVTX-properties of aqueous orthoboric-acid fluids has been carried out to define the conditions of pocket formation. At room temperature, FMI in early pocket quartz and in quartz from the coarse-grained quartz–oligoclase host pegmatite contain crystalline aggregates and an orthoboric-acid fluid. The portion of FMI in inclusion assemblages decreases and the volume of fluid in inclusions increases from the early to the late growth zones in the pocket quartz. No FMI have been found in the late growth zones. Significant variations of solid/fluid ratios in the neighboring FMI result from heterogeneous entrapment of coexisting melts and fluids by a host mineral. Raman spectroscopy, SEM EDS and EMPA indicate that the crystalline aggregates in FMI are dominated by mica minerals of the boron-rich muscovite–nanpingite CsAl₂[AlSi₃O₁₀](OH,F)₂ series as well as lepidolite. Topaz, quartz, potassium feldspar and several unidentified minerals occur in much lower amounts. Fluid isolations in FMI and FI have similar total salinity (4–8 wt.% NaCl eq.) and H₃BO₃ contents (12–16 wt.%). The melt inclusions in host-pegmatite quartz homogenize at 570–600 °C. The silicate crystalline aggregates in large inclusions in pocket quartz completely melt at 615 °C. However, even after those inclusions were significantly overheated at 650±10 °C and 2.5 kbar during 24 h they remained non-homogeneous and displayed two types: (i) glass+unmelted crystals and (ii) fluid+glass. The FMI glasses contain 1.94–2.73 wt.% F, 2.51 wt.% B₂O₃, 3.64–5.20 wt.% Cs₂O, 0.54 wt.% Li₂O, 0.57 wt.% Ta₂O₅, 0.10 wt.% Nb₂O₅, 0.12 wt.% BeO. The H₂O content of the glass could exceed 12 wt.%. Such compositions suggest that the residual melts of the latest magmatic stage were strongly enriched in H₂O, B, F, Cs and contained elevated concentrations of Li, Be, Ta, and Nb. FMI microthermometry showed that those melts could have crystallized at 615–550 °C.

Crystallization of quartz–feldspar pegmatite matrix leads to the formation of H₂O-, B- and F-enriched residual melts and associated fluids (prototypes of pockets). Fluids of different compositions and residual melts of different liquidus–solidus P–T-conditions would form pockets with various internal fluid pressures. During crystallization, those melts release more aqueous fluids resulting in a further increase of the fluid pressure in pockets. A significant overpressure and a possible pressure gradient between the neighboring pockets would induce fracturing of pockets and “fluid explosions”. The fracturing commonly results in the crushing of pocket walls, formation of new fractures connecting adjacent pockets, heterogenization and mixing of pocket fluids. Such newly formed fluids would interact with a primary pegmatite matrix along the fractures and cause autometasomatic alteration, recrystallization, leaching and formation of “primary–secondary” pockets.     

Geology and geochemistry of Iberian roofing slates

This article analyzes the geochemical and mineralogical composition of the roofing slate deposits of the Iberian Peninsula. Most roofing slate deposits are found on Middle and Upper Ordovician terrains, although there are also deposits in the Ediacaran, Cambrian and Devonian terrains. Samples of slate were taken in most of the active quarries of the Iberian Peninsula, and being analyzed by X-ray Diffraction and Fluorescence. Each lithotect or slate productive formation has its own specific proportions of major and trace elements, being able to differentiate between them by using these relationships. This fact is particularly interesting in geological exploration and prospecting, as it allows knowing exactly the slate lithotect, and also for restoration work in the architectural heritage, due to the ability of identifying the source of the original slate tiles.     

Unraveling complex hydrogeological processes in Andean basins in south‐central Chile: An integrated assessment to understand hydrological dissimilarity

Groundwater storage, drainage, and interbasin water exchange are common hydrological processes but often difficult to quantify due to a lack of local observations. We present a study of three volcanic mountainous watersheds located in south‐central Chile (~36.9 ° S) in the Chillán volcanic complex (Chillán, Renegado, and Diguillín river basins). These are neighboring basins that are similar with respect to the metrics normally available for characterization everywhere (e.g., precipitation, temperature, and land cover). In a hydrological sense, similar (proportional) behavior would be expected if these catchments would be characterized with this general information. However, these watersheds show dissimilar behavior when analyzed in detail. The surface water balance does not fit for any of these watersheds individually; however, the water balance of the whole system can be explained by likely interbasin water exchanges. The Renegado river basin has an average annual runoff per unit of area on the order of 60–65% less than those of the Diguillín and Chillán rivers, which is contradictory to the hydrological similarity among the basins. To understand the main processes that control streamflow generation, two analyses were performed: (a) basin metrics (land cover, geologic, topographic, and climatological maps) and hydro‐meteorological data analyses and (b) a water balance model approach. The analyses contribute to a plausible explanation for the hydrogeological processes in the system. The soils, topography, and geology of the Chillán–Renegado–Diguillín system favor the infiltration and groundwater movements from the Renegado river basin, mainly to the neighboring Diguillín basin. The interbasin water exchanges affect hydrological similarity and explain the differences observed in the hydrological processes of these three apparently similar volcanic basins. The results highlight the complexity of hydrological processes in volcanic mountainous systems and suggest that a simple watershed classification approach based on widely available data is insufficient. Simple local analyses such as specific flow analysis with a review of the geology and morphology can contribute to a better understanding of the hydrology of volcanic mountainous areas.     

Construction of Structural Geological Model Using Monte Carlo Simulation

Geotechnical and Geological Engineering - To optimize the prediction of structural geological conditions in the underground as of data collected at the surface, due to the usual great uncertainties...     

Soil acidity adaptive control problem

Problem of soil acidity regularization is modeled as stochastic adaptive control problem with a linear difference equation of the dynamics of a field pH level. Stochastic component in the equation represents an individual time variability of soil acidity of an elementary section. We use Bayesian approach to determine a posteriori probability density function of the unknown parameters of the stochastic transition process. The Kullback–Leibler information divergence is used as a measure of difference between true distribution and its estimation. Algorithm for the construction of an adaptive stabilizing control in such a linear control system is proposed in the paper. Numerical realization of the algorithm is represented for a problem of a field soil acidity control.