LonGSp: A near infra-red spectrometer

We present a new cooled grating near infra-red spectrometer designed to acquire spectra at the TIRGO telescope in the 0.9÷2.5m region with a resolving power of 300÷4000, equipped with a Rockwell NICMOS 3 detector.     

Impact of increased vertical resolution on simulation of tropical climate

Summary The aim of this study is to describe the behaviour of tropical dynamics in the ECHAM4 model when increased vertical resolution around the tropopause and in the planetary boundary layer is used. In this work we perform experiments with the ECHAM4 model using T30 horizontal resolution and 19 and 42 vertical levels. The impact of the increased vertical resolution on the simulation of tropical clouds and precipitation has been investigated. Therefore, the dynamic fields related to tropical convection have been analyzed. The results suggest a beneficial effect of the increased number of vertical levels on the convective scheme performance and on the related dynamic fields over the Tropics. The improvement of the rainfall climatologies in the 42-level model has been explained via the impact of vertical resolution on the cloud structure. In the cloud spectrum of the L42 simulation, a third peak appears around 600 hPa, revealing that when using higher vertical resolution the convective parametrization starts to represent cumulus congestus clouds.     

Abundance and degree of residency of humpback dolphins Sousa plumbea in Mossel Bay,South Africa

Indian Ocean humpback dolphins Sousa plumbea inhabit nearshore waters from South Africa to eastern India. Humpback dolphins are vulnerable to conservation threats due to their naturally small population sizes and use of nearshore habitats, where human activities are highest. We investigated the abundance and residency of this species inhabiting Mossel Bay, South Africa, using photographic mark-recapture. Data were collected during 81 surveys in Mossel Bay between 2011 and 2013. Open population modelling using the POPAN parameterisation produced a ‘super-population’ estimate of 125 individuals (95% CI: 61–260) and within-year estimates of between 33 and 86 individuals (2011: 71 [95% CI: 30–168]; 2012: 33 [15–73], 32 [15–70]; 2013: 46 [20–108]). Although less appropriate, closed capture models were also run for comparison with previous studies in the region and generated similar, but slightly smaller, population estimates within each year. We compared our catalogue with opportunistic data collected from East London, Plettenberg Bay, De Hoop and Gansbaai. The only catalogue matches attained were between Plettenberg Bay (n = 44 identified) and Mossel Bay (n = 67 identified), separated by 140?km. Population exchange was moderate, with nine individuals resighted in multiple years between these two areas. This study supports previous findings of long-range movements for this species and provides a baseline from which to assess future impacts on the population.     

The difficult challenge of modelling the non-linear elastic behaviour of soils within a theoretically sound framework

Hypo-elastic relations are often adopted to simulate the recoverable non-linear behaviour of soils within elasto-plastic constitutive models. In reality, they are unable to reproduce the elastic, ie, recoverable, response of materials; hence, they introduce severe inconsistencies in models based on the decomposition of the total strain tensor into its recoverable and permanent parts. Hyper-elasticity should then be used. However, existing models developed within this framework do not satisfy a number of fundamental theoretical requirements. A new hyper-elastic model is proposed, which is rigourously formulated by integrating some of the main relations which emerge from experimental results. The model satisfies all theoretical requirements and also possesses features that are fundamental for its numerical integration. The model can be considered as the correct hyper-elastic version of the classical hypo-elastic constitutive relation adopted in models based on the Critical State framework, such as the Modified Cam-Clay, with a constant Poisson's ratio.     

Climate change mitigation scenarios and policies and measures: the case of Kazakhstan

This article illustrates the main difficulties encountered in the preparation of GHG emission projections and climate change mitigation policies and measures (P&M) for Kazakhstan. Difficulties in representing the system with an economic model have been overcome by representing the energy system with a technical-economic growth model (MARKAL-TIMES) based on the stock of existing plants, transformation processes, and end-use devices. GHG emission scenarios depend mainly on the pace of transition in Kazakhstan from a planned economy to a market economy. Three scenarios are portrayed: an incomplete transition, a fast and successful one, and even more advanced participation in global climate change mitigation, including participation in some emission trading schemes. If the transition to a market economy is completed by 2020, P&M already adopted may reduce emissions of CO₂ from combustion by about 85 MtCO₂ by 2030 – 17% of the emissions in the baseline (WOM) scenario. One-third of these reductions are likely to be obtained from the demand sectors, and two-thirds from the supply sectors. If every tonne of CO₂ not emitted is valued up to US$10 in 2020 and $20 in 2030, additional P&M may further reduce emissions by 110 MtCO₂ by 2030.     

Age refinement of the Messinian salinity crisis onset in the Mediterranean

We propose a revised age calibration of the Messinian salinity crisis onset in the Mediterranean at 5.971 Ma based on the recognition of an extra gypsum cycle in the transitional interval of the Perales section (Sorbas basin, Spain) and the revision of the magnetostratigraphy of the Monticino section (Vena del Gesso basin, Italy). This age re‐calibration allows to state more accurately that: (i) the interval encompassing the MSC‐onset is continuous, thus ruling out any erosional feature or stratigraphic hiatus related to a major sea‐level fall affecting the Mediterranean; (ii) the first gypsum was deposited during the summer insolation peak at 5.969 Ma associated with an eccentricity minimum and roughly coincident with glacial stage TG32; (iii) the MSC‐onset was preconditioned by the tectonically‐driven reduction of the hydrological exchanges with the Atlantic Ocean and finally triggered by glacial conditions in the northern hemisphere and by arid conditions in northern Africa.     

Damage detection on framed structures: modal curvature evaluation using Stockwell Transform under seismic excitation

The key parameters for damage detection and localization are eigenfrequencies, related equivalent viscous damping factors and mode shapes. The classical approach is based on the evaluation of these structural parameters before and after a seismic event, but by using a modern approach based on time-frequency transformations it is possible to quantify these parameters throughout the ground shaking phase. In particular with the use of the S-Transform, it is possible to follow the temporal evolution of the structural dynamics parameters before, during and after an earthquake. In this paper, a methodology for damage localization on framed structures subjected to strong motion earthquakes is proposed based on monitoring the modal curvature variation in the natural frequency of a structure. Two examples of application are described to illustrate the technique: Computer simulation of the nonlinear response of a model, and several laboratory(shaking table) tests performed at the University of Basilicata(Italy). Damage detected using the proposed approach and damage revealed via visual inspections in the tests are compared.     

Relationship between soil CO<Subscript>2</Subscript> flux and volcanic tremor at Mt. Etna: Implications for magma dynamics

Large variations of the CO₂ flux through the soil were observed between November 2002 and January 2006 at Mt. Etna volcano. In many cases, the CO₂ flux was strongly influenced by changes in air temperature and atmospheric pressure. A new filtering method was then developed to remove the atmospheric influences on soil CO₂ flux and, at the same time, to highlight the variations strictly related to volcanic activity. Successively, the CO₂ corrected data were quantitatively compared with the spectral amplitude of the volcanic tremor by cross correlation function, cross-wavelet spectrum and wavelet coherence. These analyses suggested that the soil CO₂ flux variations preceded those of volcanic tremor by about 50 days. Given that volcanic tremor is linked to the shallow (a few kilometer) magma dynamics and soil CO₂ flux related to the deeper (~12 km b.s.l.) magma dynamics, the “delayed similarity” between the CO₂ flux and the volcanic tremor amplitude was used to assess the average speed in the magma uprising into the crust, as about 170–260 m per day. Finally, the large amount of CO₂ released before the onset of the 2004–2005 eruption indicated a deep ingression of new magma, which might have triggered such an eruption.     

High-precision CTE measurement of aluminum-alloys for cryogenic astronomical instrumentation

We are completing the construction of GIANO, a high resolution near-infrared cryogenic spectrograph for the Telescopio Nazionale Galileo (TNG). Most of the optics are made of aluminium and operate at cryogenic temperature. We evaluated the optical degradation due to mis-matches between the thermal expansion coefficients of the different aluminium parts of the instrument. We performed accurate measurements of the relative thermal expansion coefficients (CTE) of Al-6061 and Al-6082 over the 300–77 K temperatures range. We find that the two alloys have identical thermal expansion coefficient within a maximum (3σ) uncertainty of Δα/α?<?0.28%. Our results show that it is possible to overcome the problem of the alignment of a cryogenic instrument, manufacturing the curved optics, the optics’ holders and the optical bench with different metallic alloys with small CTE mismatch (Al-6061 and Al-6082). This conclusion has also been confirmed by the results of the optical tests with the instrument cooled in the laboratory, showing no significant image quality degradation.