New Insights into Lamellar Twisting in Transcrystalline Polyethylene

Summary: The morphology of the transcrystalline layer grown by nucleating high density polyethylene on fibers of ultra high molecular weight polyethylene was investigated by microbeam synchrotron X‐ray diffraction. Scanning with a 2 micron step size, it was possible to determine that near the fiber surface, the polymer chains of the transcrystalline layer are oriented at an angle of approx. 41° with respect to the fiber axis. This is consistent with the lamellar fold surface (the {201} plane) being close to perpendicular to the fiber axis. The X‐ray data support gradual twisting of the lamellae about the growth direction (the orthorhombic crystallite b‐axis) at a rate of ～0.85° per micron of radial distance from the fiber surface.

Polarized light micrograph of the transcrystalline layer in a PE/PE composite. The width of the fiber is approximately 20 μm.     

Optimedin: a novel olfactomedin-related protein that interacts with myocilin

Mutations in the MYOC gene may lead to juvenile open-angle glaucoma with high intraocular pressure, and are detected in about 4% of people with adult onset glaucoma. Most of these mutations are found in the third exon of the gene encoding the olfactomedin-like domain located at the C terminus of the protein. Another olfactomedin-related protein, known as noelin or pancortin, is involved in the generation of neural crest cells. Here we describe the identification of a novel olfactomedin-related gene, named optimedin, located on chromosome 1p21 in humans. Optimedin and noelin are both expressed in brain and retina. However, unlike noelin, rat optimedin is also highly expressed in the epithelial cells of the iris and the ciliary body in close proximity to the sites of Myoc expression. In the human eye, optimedin is expressed in the retina and the trabecular meshwork. Both optimedin and myocilin are localized in Golgi and are secreted proteins. The presence of mutant myocilin interferes with secretion of optimedin in transfected cells. Optimedin and myocilin interact with each other in vitro as judged by the GST pulldown, co-immunoprecipitation and far-western binding assays. The C-terminal olfactomedin domains are essential for interaction between optimedin and myocilin, while the N-terminal domains of both proteins are involved in the formation of protein homodimers. We suggest that optimedin may be a candidate gene for disorders involving the anterior segment of the eye and the retina.     

Interaction between the amino and carbonyl groups in copoly(2-dimethylaminoethyl methacrylate/N-phenylmaleimide)

Interactions between the carbonyl and amino groups in copolymers of 2-dimethylaminoethyl methacrylate with N-phenylmaleimide are reported. The existence of interactions ensues from potentiometric measurements and UV-VIS spectra. Interactions in these copolymers result in the formation of energetically very advantageous chromophores, reflected in an intense red colour of the substances obtained.     

A social-psychological perspective on successful community control of high blood pressure: A review

This review brings together studies dealing with factors that affect participation in screening, referral, and treatment for high blood pressure (HBP). Community-based screening programs are examined first, in order to describe the changing and the current distribution of hypertensives as unaware, untreated, treated but uncontrolled, and controlled by treatment. Factors influencing this distribution are examined. Next, data on referral, acceptance of treatment, and staying in treatment are discussed, with a special reference to intervention studies. The review then brings in the broader social science literature on the psychosocial dynamics of health-maintaining and risk-reducing behaviors. The article concludes with an interpretive summary and some suggestions for further action.     

The IAEA/WHO TLD postal dose quality audits for radiotherapy: a perspective of dosimetry practices at hospitals in developing countries.

BACKGROUND AND PURPOSE: The IAEA/WHO TLD postal programme for external audits of the calibration of high-energy photon beams used in radiotherapy has been in operation since 1969. This work presents a survey of the 1317 TLD audits carried out during 1998-2001. The TLD results are discussed from the perspective of the dosimetry practices in hospitals in developing countries, based on the information provided by the participants in their TLD data sheets. MATERIALS AND METHODS: A detailed analysis of the TLD data sheets is systematically performed at the IAEA. It helps to trace the source of any discrepancy between the TLD measured dose and the user stated dose, and also provides information on equipment, dosimetry procedures and the use of codes of practice in the countries participating in the IAEA/WHO TLD audits. RESULT: The TLD results are within the 5% acceptance limit for 84% of the participants. The results for accelerator beams are typically better than for Co-60 units. Approximately 75% of participants reported dosimetry data, including details on their procedure for dose determination from ionisation chamber measurements. For the remaining 25% of hospitals, who did not submit these data, the results are poorer than the global TLD results. Most hospitals have Farmer type ionisation chambers calibrated in terms of air kerma by a standards laboratory. Less than 10% of the hospitals use new codes of practice based on standards of absorbed dose to water. CONCLUSION: Despite the differences in dosimetry equipment, traceability to different standards laboratories and uncertainties arising from the use of various dosimetry codes of practice, the determination of absorbed dose to water for photon beams typically agrees within 2% among hospitals. Correct implementation of any of the dosimetry protocols should ensure that significant errors in dosimetry are avoided.     

Biodegradable Polymer Nanosheets Incorporated with Zn-Containing Nanoparticles for Biomedical Applications

So far, poly(L-lactic acid), PLLA nanosheets proved to be promising for wound healing. Such biodegradable materials are easy to prepare, bio-friendly, cost-effective, simple to apply and were shown to protect burn wounds and facilitate their healing. At the same time, certain metal ions are known to be essential for wound healing, which is why this study was motivated by the idea of incorporating PLLA nanosheets with Zn²⁺ ion containing nanoparticles. Upon being applied on wound, such polymer nanosheets should release Zn²⁺ ions, which is expected to improve wound healing. The work thus focused on preparing PLLA nanosheets embedded with several kinds of Zn-containing nanoparticles, their characterization and ion-release behavior. ZnCl₂ and ZnO nanoparticles were chosen because of their different solubility in water, with the intention to see the dynamics of their Zn²⁺ ion release in liquid medium with pH around 7.4. Interestingly, the prepared PLLA nanosheets demonstrated quit similar ion release rates, reaching the maximum concentration after about 10 h. This finding implies that such polymer materials can be promising as they are expected to release ions within several hours after their application on skin.     

Femtosecond Laser Fabrication of Anisotropic Structures in Phosphorus- and Boron-Doped Amorphous Silicon Films

Femtosecond laser-modified amorphous silicon (a-Si) films with optical and electrical anisotropy have perspective polarization-sensitive applications in optics, photovoltaics, and sensors. We demonstrate the formation of one-dimensional femtosecond laser-induced periodic surface structures (LIPSS) on the surface of phosphorus- (n-a-Si) and boron-doped (p-a-Si) amorphous silicon films. The LIPSS are orthogonal to the laser polarization, and their period decreases from 1.1 ± 0.1 µm to 0.84 ± 0.07 µm for p-a-Si and from 1.06 ± 0.03 to 0.98 ± 0.01 for n-a-Si when the number of laser pulses per unit area increases from 30 to 120. Raman spectra analysis indicates nonuniform nanocrystallization of the irradiated films, with the nanocrystalline Si phase volume fraction decreasing with depth from ~80 to ~40% for p-a-Si and from ~20 to ~10% for n-a-Si. LIPSS’ depolarizing effect, excessive ablation of the film between LIPSS ridges, as well as anisotropic crystalline phase distribution within the film lead to the emergence of conductivity anisotropy of up to 1 order for irradiated films. Current–voltage characteristic nonlinearity observed for modified p-a-Si samples may be associated with the presence of both the crystalline and amorphous phases, resulting in the formation of potential barriers for the in-plane carrier transport and Schottky barriers at the electric contacts.     

Influence of SHS Precursor Composition on the Properties of Yttria Powders and Optical Ceramics

This study looked at optimizing the composition of precursors for yttria nanopowder glycine–nitrate self-propagating high-temperature synthesis (SHS). Based on thermodynamic studies, six different precursor compositions were selected, including with excesses of either oxidant or fuel. The powders from the precursors of all selected compositions were highly dispersed and had specific surface areas ranging from 22 to 57 m²/g. They were consolidated by hot pressing (HP) with lithium–fluoride sintering additive and subsequent hot isostatic pressing (HIP). The 1 mm thick HPed ceramics had transmittance in the range of 74.5% to 80.1% @ 1μm, which was limited by optical inhomogeneity due to incomplete evaporation of the sintering additive. Two-stage HIP significantly improves optical homogeneity of the ceramics. It was shown that an excess of oxidizer in the precursor decreases the powders’ agglomeration degree, which forms large pore clusters in the ceramics.