Complete nucleotide sequence of mouse mammary tumor virus from jyg chinese wild mice: Absence of bacterial insertion sequences in the cloned viral gag gene

Mammary tumors of a newly isolated strain of Chinese wild mouse (JYG mouse) harbor exogenous mouse mammary tumor virus (MMTV). The complete nucleotide sequence of exogenous JYG-MMTV was determined on the proviral 5' long terminal repeat (LTR)(partial)-gag-pol-env-3' LTR (partial) fragment cloned into a plasmid vector and the cDNA sequence from JYG-MMTV producing cells. Similarly to the other MMTV species the LTR of JYG-MMTV contains an open reading frame (ORF). The amino acid sequence of the JYG-MMTV ORF resembles that of SW-MMTV (92% identity) and endogenous Mtv-7 (93% identity) especially at the C-terminal region. Thus, a functional similarity in T-cell receptor V beta recognition as a superantigen is implicated among these MMTV species. Analysis of the viral gag nucleotide sequence revealed that this gene is not disrupted by the bacterial insertion sequence IS1 or IS2, which have been reported to be present in the majority of the plasmids containing the gag region. Comparison of amino acid sequences of JYG-MMTV with those of BR6-MMTV showed that over 96% of the amino acids of gag, pol, protease and env products are identical. These results suggest the intact nature of the nucleotide sequence of the near full-length MMTV genome cloned in the plasmid.     

Influence of Gypsum Waste Utilization on Properties and Leachability of Fired Clay Brick

Wastewater treatment activities in the chemical industry have generated abundant gypsum waste, classified as scheduled waste (SW205) under the Environmental Quality Regulations 2005. The waste needs to be disposed into a secure landfill due to the high heavy metals content which is becoming a threat to the environment. Hence, an alternative disposal method was evaluated by recycling the waste into fired clay brick. The brick samples were incorporated with different percentages of gypsum waste (0% as control, 10, 20, 30, 40 and 50%) and were fired at 1050 °C using 1 °C per minute heating rate. Shrinkage, dry density, initial rate of suction (IRS) and compressive strength tests were conducted to determine the physical and mechanical properties of the brick, while the synthetic precipitation leaching procedure (SPLP) was performed to scrutinize the leachability of heavy metals from the crushed brick samples. The results showed that the properties would decrease through the incorporation of gypsum waste and indicated the best result at 10% of waste utilization with 47.5% of shrinkage, 1.37% of dry density, 22.87% of IRS and 28.3% of compressive strength. In addition, the leachability test highlighted that the concentrations of Fe and Al was significantly reduced up to 100% from 4884 to 3.13 ppm (Fe) and from 16,134 to 0.81 ppm (Al), respectively. The heavy metals content in the bricks were oxidized during the firing process, which signified the successful remediation of heavy metals in the samples. Based on the permissible incorporation of gypsum waste into fired clay brick, this study promised a more green disposing method for gypsum waste, and insight as a potential towards achieving a sustainable end product.     

“We have to ask and only then do”: Unpacking agency and autonomy in women's reproductive health in urban India

The limited autonomy and agency of women in developing countries is recognized as a key barrier to improving their reproductive health. Using an existing perinatal cohort in urban South India, we interviewed 36 women who had recently been through childbirth, and we carried out observations of family life and clinic encounters. Critical domains involved in women's agency and autonomy were women's participation in employment and group action and their mobility. Household decision making was considered a joint rather than individual responsibility. We call for a more nuanced understanding of these domains and their relationship to women's reproductive health, particularly for urban populations.     

Cellular and molecular pathophysiology in the progression of Parkinson’s disease

Metabolic Brain Disease - Parkinson’s disease (PD) is a neurodegenerative disorder etiologically linked to the loss of substantia nigra (SN) dopaminergic neurons in the mid-brain. The...     

Molecular mechanism of capillarisin-mediated inhibition of MyD88/TIRAP inflammatory signaling in in vitro and in vivo experimental models

Ethnopharmacological relevance

Artemisia capillaris Thunberg (Compositae) have been used as traditional medicine as a diuretic, liver protective agent, and for amelioration of inflammatory and analgesic disorders. The present study was carried out to establish the scientific rationale for treating inflammation and to find active principles from A. capillaris.The aim of the present study is to investigate the possible anti-inflammatory mechanism of the major component (capillarisin) isolated from A. capillaris via inhibition of MyD88/TIRAP inflammatory signaling both in vitro and in vivo models.

Materials and methods

The nitrite, PGE₂, and TNF-α productions were evaluated by Griess reagent and ELISA kits. The protein and mRNA expression levels were investigated by Western blot and RT-PCR. The NF-κB and AP-1 DNA-binding was performed by electrophoretic mobility shift assay. The CFA- and carrageenan-induced paw edema was performed in ICR mice in which 20 and 80 mg/kg body weight of capillarisin was administered intraperitoneally (i.p.).

Results

The results demonstrated that pretreatment with capillarisin effectively inhibited the LPS-induced activation of NF-κB, Akt, and MAP kinase-activated inflammatory genes, which is mediated by MyD88 and TIRAP. Treatment with capillarisin reduced the mRNA and protein levels of iNOS and COX-2 in RAW 264.7 cells as assessed by RT-PCR and Western blot. Capillarisin suppressed LPS-induced inhibitory kappa kinase (IKK) phosphorylation and the degradation of inhibitory kappa B (IκBα) and prevented the nuclear translocation of p65 and p50. Capillarisin also exhibited a promising inhibitory effect on the LPS-induced NF-κB and AP-1 DNA binding activity based on an electrophoretic mobility shift assay. The LPS-induced activation of p-JNK, p-p38, p-ERK, and p-Akt was significantly inhibited. In addition, the TNF-α level in the media was effectively reduced by capillarisin. In vivo experimental analysis revealed that capillarisin (20 and 80 mg/kg, i.p.) inhibited complete Freund's adjuvant (CFA)-and carrageenan-induced paw edema, nitrite production in plasma, and TNF-α, a pro-inflammatory cytokine production.

Conclusion

The results presented here demonstrate that capillarisin has consistent anti-inflammatory properties and acts by inhibiting inflammatory mediators in in vitro and in vivo experimental models, and suggest its potential utility in the control of inflammatory disorders.     

Natural and anthropogenic radioactivity levels and the associated radiation hazard in the soil of Oodalia Tea Estate in the hilly region of Fatickchari in Chittagong,Bangladesh

Radioactivity in the soil of a tea garden in the Fatickchari area in Chittagong, Bangladesh, was measured using a high-resolution HPGe detector. The soil samples were collected from depths of up to 20 cm beneath the soil surface. The activity concentrations of naturally occurring ²³⁸U and ²³²Th were observed to be in the range of 27 ± 7 to 53 ± 8 Bq kg⁻¹ and 36 ± 11 to 72 ± 11 Bq kg⁻¹, respectively. The activity concentration of ⁴⁰K ranged from 201 ± 78 to 672 ± 81 Bq kg⁻¹, and the highest activity of fallout ¹³⁷Cs observed was 10 ± 1 Bq kg⁻¹. The average activity concentration observed for ²³⁸U was 39 ± 8 Bq kg⁻¹, for ²³²Th was 57 ± 11 Bq kg⁻¹, for ⁴⁰K was 384 ± 79 Bq kg⁻¹ and for ¹³⁷Cs was 5 ± 0.5 Bq kg⁻¹. The radiological hazard parameters (representative level index, radium equivalent activity, outdoor and indoor dose rates, outdoor and indoor annual effective dose equivalents, and radiation hazard index) were calculated from the radioactivity in the soil.     

Impact of carboxylation and hydrolysis functionalisations on the anti-oil staining behaviour of textiles grafted with poly(N-isopropylacrylamide) hydrogel

Novel hydrogel-modified textiles have been prepared through photografting poly(N-isopropylacrylamide) (PNIPAAm) onto pristine and functionalised polyethylene terephthalate (PET) surfaces. In this work, two types of functionalisation, carboxylation (CPET) and hydrolysis (HPET), were performed to scrutinise the hydrogel grafting efficiency. Basic characterisation of the pristine, functionalised and grafted textiles was carried out via fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM) analyses. Then, the functional characteristics of these samples were determined based on the oil staining performance. Functionalisation of the PET textiles via hydrolysis and carboxylation gives rise to different chemical reactivity and interactions on the PET surface. Impressively, the surface formed via hydrolysis functionalisation of PET was found to be more efficient compared to that formed via carboxylation, and the untreated one. The HPET surface was remarkably more hydrophilised and rougher than both the UPET and CPET surfaces. The accessibility of the –OH groups for hydrogen abstraction from HPET has a great impact on the hydrogel grafting onto the HPET surface. All the grafted textiles (PNIPAAm-g-UPET, PNIPAAm-g-CPET and PNIPAAm-g-HPET) demonstrated anti-oil staining behaviour at 27 °C. In particular, PNIPAAm-g-HPET textiles with a high degree of grafting (DG) exhibited the fastest rate for oil to de-stain from the surface. Moreover, the reversible transition of PNIPAAm hydrogels around the lower critical solution temperature (LCST) ∼ 32 °C from hydrophilic to hydrophobic generates switchable surfaces of the textiles with regard to the oil wettability. Specifically, PNIPAAm-g-HPET textiles also displayed the highest degree of wettability switching as a result of having the highest DG. Taken together, the PNIPAAm hydrogels grafted onto PET textiles were significantly enhanced though hydrolysis functionalisation and possessed excellent switchable surfaces toward oil-staining, having great potential to be used for applications in oil and water separation as well as smart textiles.

Functionalisation, especially via hydrolysis, has created efficient PNIPAAm hydrogels grafted onto PET textiles with superior anti-oil staining performance.     

Capacitive performance of vertically aligned reduced titania nanotubes coated with Mn2O3 by reverse pulse electrodeposition

In this study, a composite material, manganese oxide/reduced titania nanotubes (Mn₂O₃/R-TNTs), was synthesized through incorporation of Mn₂O₃ onto R-TNTs via the reverse pulse electrodeposition technique. The influence of pulse reverse duty cycles on the morphological, structural and electrochemical performance of the surface was studied by varying the applied duty cycle from 10% to 90% for 5 min total on-time at an alternate potential of −0.90 V (E_on) and 0.00 V (E_off). FESEM analysis revealed the uniform deposition of Mn₂O₃ on the circumference of the nanotubes. The amount of Mn₂O₃ loaded onto the R-TNTs increased as a higher duty cycle was applied. Cyclic voltammetry and galvanostatic charge–discharge tests were employed to elucidate the electrochemical properties of all the synthesized samples in 1 M KCl. The specific capacitance per unit area was greatly enhanced upon the incorporation of Mn₂O₃ onto R-TNTs, but showed a decrease as a high duty cycle was applied. This proved that low amounts of Mn₂O₃ loading enhanced the facilitation of the active ions for charge storage purposes. The optimized sample, Mn₂O₃/R-TNTs synthesized at 10% duty cycle, exhibited high specific capacitance of 18.32 mF cm⁻² at a current density of 0.1 mA cm⁻² obtained from constant current charge–discharge measurements. This revealed that the specific capacitance possessed by Mn₂O₃/R-TNTs synthesized at 10% duty cycle was 6 times higher than bare R-TNTs.

Mn₂O₃ was coated onto reduced titania nanotubes by reverse pulse electrodeposition, showing smooth and homogenous deposits without covering the opening of the nanotubes.