Microstructure and Sliding Wear Behaviour of Ni(Cr)-TiB_2 Coatings Deposited by HVOF Spraying of SHS Powders

THERMAL SPRAYING provides a large range ofcoatings,which increase the wear resistance ofsubstrates[1].One of the major coating families is thecermet,composed of hard ceramic particles with ametallic binder.The most commonly used cermetcoatings in industrial applications are based on eitherthe WC-Co or the Cr3C2-Ni(Cr)systems with WC-17wt%Co and Cr3C2-25wt%Ni(Cr)being typicalcompositions[2,3].Although WC-Co deposits are hardand wear resistant at ambient temperatures their rangeof ap…     

An analytical procedure for dynamic response determination of a viscoelastic beam with moderately large deflection using first-order shear deformation theory

In this article, the dynamic response of a viscoelastic beam with moderately large deflection subjected to transverse and axial loads is studied using the first-order shear deformation theory. The von-Karman strain displacement relations and Hooke's law are used for formulation. The solution of the equations, which are a system of nonlinear partial differential equations, are obtained analytically using the perturbation technique in conjunction with the eigenfunction expansion method. The results are compared with the finite elements method. Also, a sensitivity analysis is performed, and the effects of geometrical and material properties are investigated on the response.     

Determination of Polycyclic Aromatic Hydrocarbons (PAHs) in Olive and Refined Pomace Olive Oils with Modified Low Temperature and Ultrasound-Assisted Liquid–Liquid Extraction Method Followed by the HPLC/FLD

The cleanup method of modified low temperature was compared with the standardized method of modified ultrasound-assisted liquid–liquid (UALL) extraction for the analysis of 15 polycyclic aromatic hydrocarbons (PAHs) in olive oil and refined pomace olive oil. The modified UALL extraction consisted in purification on C₁₈ reversed-phase, Florisil-bonded-phase and NH₂ cartridges, and modified low-temperature extraction was followed by alumina-N and NH₂ solid-phase extraction (SPE) cartridges. Both methods are followed by reversed-phase high-performance liquid chromatography with fluorescence detection. The chromatograms of the final extracts showed lower interferences in both of the methods. The solvent consumption and cost for the modified UALL method were higher than those of the modified low temperature, and also, it needed more equipment, but its analysis time was less. The limit of detection and limit of quantitation of the modified UALL method were 0.16–0.97 and 0.57–2.93 μg kg^?1, respectively, and for the modified low temperature, they were 0.09–1.97 and 0.29–5.99 μg kg^?1, respectively. The PAH recoveries for the modified UALL extraction method ranged from 75.0 to 111.0 % (RSD?=?3–8 %), and for the modified low temperature, they ranged from 81.5 to 113.8 % (RSD?=?3–10 %).     

Hydrodynamic characteristics of gas–solid fluidization at high temperature

Effect of temperature on the hydrodynamics of bubbling gas–solid fluidized beds was investigated in this work. Experiments were carried out at different temperatures ranged of 25–600°C and different superficial gas velocities in the range of 0.17–0.78 m/s with sand particles. The time‐position trajectory of particles was obtained by the radioactive particle tracking technique at elevated temperature. These data were used for determination of some hydrodynamic parameters (mean velocity of upward and downward‐moving particles, jump frequency, cycle frequency, and axial/radial diffusivities) which are representative to solids mixing through the bed. It was shown that solids mixing and diffusivity of particles increases by increasing temperature up to around 300°C. However, these parameters decrease by further increasing the temperature to higher than 300°C. This could be attributed to the properties of bubble and emulsion phases. Results of this study indicated that the bubbles grow up to a maximum diameter by increasing the temperature up to 300°C, after which the bubbles become smaller. The results showed that due to the wall effect, there is no significant change in the mean velocity of downward‐moving clusters. In order to explain these trends, surface tension of emulsion between the rising bubble and the emulsion phase was introduced and evaluated in the bubbling fluidized bed. The results showed that surface tension between bubble and emulsion is increased by increasing temperature up to 300°C, however, after that it acts in oppositely.     

Designing a nuclear battery based on the Mo-99 radioactive source soluble in water and aqua regia in order to use in early tests

Today, millions of electrocommunication, electric, medical, and industrial devices use battery. Batteries with long life and high energy density seem to be essential in medical, military, oil and mining, aerospace areas as well as conditions in which access is difficult and in situations where replacement or recharging of battery is costly.In this regard, the use of radiation energy resulting from radioactive materials and its conversion to electric energy can be effective in making batteries. In the present study,various Mo-99 radioisotope values with a half-life of 65.98 h were used as a soluble radioactive source in two materials of water and aqua regia. Then, by comparing the results of the Monte Carlo simulations program MCNPX for these two solutions, it was found that when the water is used instead of aqua regia(for idealization), the values of the superficial current of electrons, the volumetric flux of electrons, and the deposited energy in the volume containing the radioactive solution increased by 10.80, 4.10,and 13.80%, respectively. Also, the short-circuit current and energy conversion efficiency of this battery with a concentration of 0.01 molar, Mo-99 dissolved in the aqua regia are 0.79μA and 16.47%, respectively.     

Self-standing crystalline TiO2 nanotubes/CNTs heterojunction membrane: synthesis and characterization

In the present study, we report for the first time synthesis of TiO(2) nanotubes/CNTs heterojunction membrane. Chemical vapor deposition (CVD) of CNTs at 650 °C in a mixture of H(2)/He atmosphere led to in situ detachment of the anodically fabricated TiO(2) nanotube layers from the Ti substrate underneath. Morphological and structural evolution of TiO(2) nanotubes after CNTs deposition were investigated by field- emission scanning electron microscopy (FESEM), glancing angle X-ray diffraction (GAXRD), and X-ray photoelectron spectroscopy (XPS) analyses.     

Preparation of silver nanostructure from silver(I) coordination polymer and fabrication of nano silver(I) bromide by reverse micelles technique

A new one-dimensional silver(I) coordination polymer, [Ag(μ-bpfb)(NO₃)]_n (1); bpfb = N,N′-bis(4-pyridylformamide)-1,4-benzene, has been synthesized and characterized by IR, ¹H NMR and ¹³C NMR spectroscopy. The single crystal X-ray data show that the silver(I) 1D coordination polymer grows into a three-dimensional network by hydrogen bonding and π–π stacking interactions. Compound 1 with nanorod morphology was also prepared by sonochemical method. The cetyltrimethylammonium bromide (CTAB) as a cationic surfactant was used in reverse micelles technique to obtain spongy silver(I) bromide nanoparticles from compound 1. Also, different silver nanoparticles have been prepared via direct calcination at 673 K and thermal decomposition in oleic acid from compound 1. The nanostructures of [Ag(μ-bpfb)(NO₃)]_n (1), silver and silver(I) bromide were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray (EDAX) analysis. Thermal stability of compound 1 in both bulk and nano-sized form was studied by thermal gravimetric (TG) and differential thermal (DT) analyses.     

Removal of Diazinon from aqueous solution by electrocoagulation process using aluminum electrodes

Electrocoagulation (EC) is an electrochemical method to treat polluted wastewaters and aqueous solutions. In this paper, the removal of Diazinon was studied by EC on aluminum electrode. The effect of several parameters such as initial concentration of Diazinon, current density, solution conductivity, effect of pH, and electrolysis time were investigated on EC performance. The obtained results showed that the removal efficiency of EC depends on the current density, initial concentration of Diazinon and electrolysis time. The optimum pH is 3 and also the solution conductivity has no significant effect on removal efficiency.     

Flow over trapezoidal side weir

In this paper, the hydraulic characteristics of a sharp crested trapezoidal side weir have been experimentally and theoretically investigated. It was found that the DeMarchi coefficient of discharge for a sharp crested trapezoidal side weir in subcritical flow is related to the main channel Froude number, the side slope of weir, ratio of weir height to upstream depth of flow and ratio of weir length to upstream depth of flow. Suitable equations for the discharge coefficient are also obtained.     

An extended discrete autoregressive model for variable bit rate video traffic encoded by scalable video codec

Designing an effective and high performance network requires accurate characterization and modeling of network traffic. This paper provides a study of the transmission, modeling, and analysis of variable bit rate (VBR) video, which is fundamental for designing protocols and for effective utilization of networks in video transmission. To meet the specified requirements of future networks, the scalable video codec (SVC) was chosen as the video compression standard. The main objective of this work was to propose a statistical model that will allow better coordination between generated SVC video traffic and original video traffic. The performance of the proposed model was evaluated by comparing the model with three existing low‐complex statistical models using graphical and statistical measurements as well as cross‐validation. For all evaluation techniques, the accuracy of the proposed model was evaluated, and the frame size distribution of the modeled traffic was found to match that of the original video traffic better than other existing models. Copyright © 2015 John Wiley & Sons, Ltd.