A load dispatch method using fractional programming and semidefinite programming

This paper describes a load dispatch method which minimizes power cost—[fuel cost]/[electric output]—for a power system with thermal plants and energy storage facilities. The proposed method employs fractional programming to convert a minimization problem with fractional objective function to a series of quadratic minimization problems, and semidefinite programming to solve converted problems. The method provides the optimum time‐dependent power output/input and storage level of energy storage facilities as well as time‐dependent power output of thermal plants. The method has been applied to a power system with five thermal plants, two energy storage facilities of various performances, and five load demands. The optimum load scheme of four time mesh points is obtained for the thermal plants and energy storage facilities. The fractional programming successfully converges the optimal scheme through a few iterations. The semidefinite programming deals with a variable matrix of 164 dimensions, and 185 inequality constraints. © 2001 Scripta Technica, Electr Eng Jpn, 138(2): 49–58, 2002     

Change of characteristics of desulfurization and denitrification by combustion flue gas composition and electrode configuration under pulsed corona discharge

Laboratory-scale and parametric experiments of SO₂ and NO_x removal from the simulated combustion gas by pulsed corona discharge have been performed by changing the combustion gas composition and temperature, the electrode configuration of plasma reactor, and the polarity of high-voltage electrode. The following results are obtained: 1) the higher the concentration of H₂O and O₂, the higher the efficiency of desulfurization and denitrification at the same specific input; 2) the pulsed corona discharge with a voltage pulsewidth as short as 200 ns of negative polarity shows the possibility to attain almost 90 percent deSO_x and deNO_x efficiency at the specific discharge input of 20 J/g, which is almost the same as the specific input in the electron-beam process; 3) the deNO_x characteristics show a little temperature dependence in the range of 70 to 130°C, but the deSO_x efficiency increases rapidly in the temperature region below 100°C suggesting the thermochemical dependence of deSO_x reaction; 4) when desulfurization and denitrification proceed, the white dendritic powder deposits on the plasma reactor whose composition is identified to be 49 mol% (NH₄)₂SO₄ and 47 mol% of 2NH₄NO₃ · (NH₄)₂SO₄, and the ratio of SO₂, NO and NH₃ of the deposit is almost equal to that of supplied gas.     

Radiation damage induced in Si photodiodes by high-temperature neutron irradiation

Results are presented of a detailed study of the effects of high-temperature 4-MeV neutron irradiation on the performance degradation of Si pin photodiodes together with the radiation-induced defects, observed by deep level transient spectroscopy (DLTS). It was found that the dark current increases after irradiation, while the photocurrent decreases. After irradiation, two majority electron capture levels with (E _c–0.22 eV) and (E _c–0.40 eV) were induced in the n-Si substrate, while one minority hole capture level with (E _v+0.37 eV) was found. Additionally, the degradation of the device performance and the introduction rate of the lattice defects decreases with increasing irradiation temperature. For a 250 °C irradiation, the reduction of the reverse current is only 20% of the starting value. This result suggests that the creation and recovery of the radiation damage proceeds simultaneously at high temperatures.     

Orientation in uniaxially drawn polystyrene plasticized by CO2 sorption

Uniaxial drawing experiments of the polystyrene films plasticized by a sorption of compressed CO₂ gas at pressures up to about 18 MPa were carried out with strain rates ε of 0.0290 and 0.0079 s^?1. The drawing was performed successfully with draw ratio λ up to 4 at the temperatures of 308.15, 318.15, 328.15, and 338.15 K. The Hermans orientation function f of the drawn samples was determined from the dichroic ratio measured by an infrared spectrophotmeter. While f value increases with increasing ε or λ, it decreases with increasing CO₂ pressure or temperature. © 1995 John Wiley & Sons, Inc.     

A PRACTICAL METHOD FOR RECTIFYING INTERFACIAL TENSION DATA TO PREDICT THE SHAPE OF INTERFACES IN AN IMMISCIBLE LIQUID/LIQUID/GAS SYSTEM

The shape of interfaces formed by the contact of two liquid phases, immiscible with each other, and a gaseous phase can be predicted on the condition that the tension to work at each interface is known with a sufficient accuracy. In general, interfacial tension data available are not so accurate, however, as to be useful as they are in predicting the shape of interfaces, particularly when the spreading coefficient of either liquid (liquid 1) on the other (liquid 2) has a negative value of a small magnitude. Presented in this note is a simple method to rectify the interfacial tension data, with the aid of a measurement of the radius of a lens of liquid 1 of a known volume placed on the horizontal surface of liquid 2, and thereby make them usable for predicting interfacial geometries. The method is tested by applying it to benzene/water and n-pentane/water systems.     

Ni-Mo alloying of nickel surface by alternating pulsed electrolysis using molybdenum(VI) baths

Electrochemical Ni-Mo alloying of the surface of a nickel substrate was investigated using alternating pulsed electrolysis in an aqueous solution containing only molybdate ions (MoO₄²⁻) as a metal ion component. In this electrochemical process, the nickel substrate was slightly dissolved during the anodic pulses, providing nickel ions into the solution in the vicinity of the substrate, while Ni and Mo were both electrodeposited on the substrate surface during the subsequent cathodic pulses. Through the optimization of anodic and cathodic conditions independently based on a set of direct-current electrolysis data, amorphous Ni-Mo alloy layers were found to be formed at the surface of the nickel substrate by the alternating pulsed electrolysis using the MoO₄²⁻ solution of pH 3.0-5.0. The conditions for Ni-Mo alloy formation were discussed in terms of the dissolving regime of ionic species in the electrolytes determined by an equilibrium calculation.     

Studies on syntheses and permeabilities of special polymer membranes

Summary The permeabilities of various cellulose ester membranes and cellulose membranes were investigated using pure water and aqueous solution of glycerol as feed. In all membranes, the permeation rate for aqueous solution of glycerol was greater than for pure water. The permeation rates of cellulose ester membranes increased with an increase in number of carbon atoms of the substituent group in cellulose ester.     

Reaction of sodium perborate with a chlorinated cyclic hindered amine (TMP-Cl): I. Quantitative evaluation of active oxygen species in fabric bleaching

The reaction of N-chloro-4-hydroxy-2,2,6,6-tetramethylpiperidine (TMP-Cl) with sodium perborate (PB) was investigated with special reference to the generation of singlet oxygen and the possible application to a new oxidative bleaching process. Generation of the singlet oxygen (¹O₂), the hydroxyl radical (HO·) and superoxide anion radical (O₂·⁻) in the PB/TMP-Cl mixed solution was confirmed by the trapping reagent method. From the results of another experiment, in which the bleaching abilities of each active oxygen species were confirmed, the main active oxygen species contributing to the bleaching of purpurogallin, the skeleton of black tea pigment, in the PB/TMP-Cl system was concluded to be¹O₂.