Artificial abortions in Bulgaria and their prevention

Authors go into one extremely important problem for the family, woman, natality and family planning in Bulgaria. Scarcely during the last years it can be observed a slight reduction of the frequency of induced abortions. The average age of women having an abortion is high--about 30, which shows, that induced abortion is still a method of regulation fertility in intergenetic interval. The rate of those who have induced abortion under the age of 19 in Bulgaria is 7.8 to 53.3%, in Czechoslovakia, 6.7%, in DDR--50.0%, Greece--68%, Hungary--8.9%, Sweden--15.8%. The rate of done again induced abortion is higher, that is a result of bad preventing activities during the first abortion. Similar is the tendency of growing number of unmarried women having an induced abortion, as it is in the other countries: from 16.4% in 1980 to 21.7% in 1987. Bulgaria is on the third place in Europe according to the absolute number of dead cases after abortion (maternity death, after Rumania and USSR). It can be mentioned that in Bulgaria women do not use the most modern and safest devices, medicines for interruption of pregnancy.     

Inulin-based emulsion-filled gel as a fat replacer in prebiotic- and PUFA-enriched dry fermented sausages

In order to produce fermented sausages with prebiotic fibre and improved fatty acid composition, 16% of pork back fat was replaced with inulin gelled suspension (I) and inulin linseed oil gelled emulsion (IO). Physico-chemical analysis, fatty acid profiles, lipid oxidation, microbiological, textural, colour and sensory analysis were carried out. The fat content was lower in I (31.38%) and IO (35.36%) modified sausages compared to control (44.37%) (P < 0.05). IO sausages had lower SFA and MUFA and higher PUFA content with an improved n-6/n-3 ratio (2.23) (P < 0.05) and α-linolenic acid increment (5.74 g per 100 g). Reformulation led to decrease in springiness, chewiness and hardness and increase in adhesiveness of the sausages. Modified sausages had lower L* and higher a* values, while b* values of I sausages did not differ compared to control sausages. Modified sausages were acceptable regarding all sensory attributes. Lipid oxidation parameters showed higher susceptibility to oxidation and lipolysis in IO sausages.     

Real time observation of crystallization in polyethylene oxide with video rate atomic force microscopy

Video rate atomic force microscopy (VideoAFM), with a frame rate of 14 frames/s and a tip velocity of up to 15 cms⁻¹, is used to image polyethylene oxide films during crystal growth. The capabilities of VideoAFM when applied to semicrystalline polymer surfaces are explored. Image quality comparable to that found with conventional contact AFM is achieved but with a nearly 1000 times improvement in time resolution. By applying the technique to the real-time observation of crystal growth, different modes of rapid crystallization are followed in real time. Observation of the spherulite growth front allows measurement of growth rates at the lamellar scale, from which a factor of two difference in the rate of radial growth to the rate of tangential growth is observed, confirming that the elongated nature of spherulite lamellae is due to geometric constraints rather than an inherent fibrillar character. Measurements on screw dislocation growth, when large amounts of crystallizable material is trapped at the surface show that the terrace height does not influence the rate of crystal growth, confirming that under these conditions processes at the lamellar growth front control the rate of growth. When only a thin film of molten material is left on the surface of the already crystallized film dendritic growth is observed, implying a diffusion controlled process under these far from equilibrium conditions.     

Electrical conduction in plasma polymerized thin films of γ‐terpinene

Plasma polymerized γ‐terpinene (pp?GT) thin films are fabricated using RF plasma polymerization. MIM structures are fabricated and using the capacitive structures dielectric properties of the material is studied. The dielectric constant values are found to be in good agreement with those determined from ellipsometric data. At a frequency of 100 kHz, the dielectric constant varies with RF deposition power, from 3.69 (10 W) to 3.24 (75 W). The current density–voltage (J?V) characteristics of pp–GT thin films are investigated as a function of RF deposition power at room temperature to determine the resistivity and DC conduction mechanism of the films. At higher applied voltage region, Schottky conduction is the dominant DC conduction mechanism. The capacitance and the loss tangent are found to be frequency dependent. The conductivity of the pp?GT thin films is found to decrease from 1.39 × 10^?12 S/cm (10 W) to 1.02 × 10^?13 S/cm (75 W) and attributed to the change in the chemical composition and structure of the polymer. The breakdown field for pp–GT thin films increases from 1.48 MV/cm (10 W) to 2 MV/cm (75 W). A single broad relaxation peak is observed indicating the contribution of multiple relaxations to the dielectric response for temperature dependent J?V. The distribution of these relaxation times is determined through regularization methods. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42318.     

Thermally Induced Viscous Flow of Borophosphosilicate-Glass Thin Films on Stepped Surfaces,Part 2: Generalized Parameters for ULSI Glass Flow Characterization

New flow parameters termed flow effectiveness andthermal budgetare used for the characterization of the thermal flow of borophosphosilicate glass serving as a premetal dielectric in ULSI circuits. Their practical value is discussed. It is concluded that the approach proposed reduces the cost of measurement, facilitates the interpretation of measured data, works for both furnace and rapid thermal annealing, is applicable to ULSI gap filling as well as glass planarization, and enables one to optimize the annealing temperature for thin films of low-fusible multicomponent glasses.