A feasibility study of a direct-mapping parallel processing method to solve linear equations in load-flow calculation

With the growing size and complexity of power systems, system analysis—such as transients calculation—takes much time. Hence, fast calculation methods are required. Although parallel processing is a hopeful method, there have been difficulties in the parallel solution of linear equations which appear in power-flow calculations by the Newton-Raphson method. This paper aims at the fast calculation of the power-flow problem by means of parallel processing. In order to improve the suitability to the parallel solution of the differential equation in transients calculation, we assume the use of a direct-mapping parallel processing machine to map directly the network of a power system onto a network of processors. Under this assumption, we propose a new parallel-processing-oriented method in which the linear equation is solved by linear iterations between nodes with Aitken acceleration. We simulate the method on three model power systems and compare this Parallel Iterative Method (PIN) with a Parallel Direct Method (PDM) which uses the banded matrix according to the number of operations required. As a result, we can expect that PIM may solve linear equations faster than PDM with m processors, although the PIM might be inferior to the PDM with m × m processors, where m denotes the half-band width of the banded matrix.     

Generation of adaptive gait patterns for quadruped robot with CPG network including motor dynamic model

This paper describes the generation of adaptive gait patterns using new Central Pattern Generators (CPGs) including motor dynamic models for a quadruped robot under various environments. The CPGs act as the flexible oscillators of the joints and adjust joint angles to required values. The CPGs are interconnected with each other and sets of their coupling parameters are adjusted by a genetic algorithm so that the quadruped robot can realize stable and adequate gait patterns. Generation of gait patterns results in the formation of the CPG networks suitable for the formation of not only a straight walking pattern but also of rotating gait patterns. Experimental results demonstrate that the proposed CPG networks are effective for the automatic adjustment of the adaptive gait patterns for the tested quadruped robot under various environments. Furthermore, the target tracking control based on image processing is achieved by combining the general gait patterns. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(1): 35–43, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20225     

Electrochemical formation of AlN in molten LiCl-KCl-Li3N systems

Electrochemical formation of aluminum nitride was investigated in molten LiCl-KCl-Li₃N systems at 723 K. When Al was anodically polarized at 1.0 V (versus Li⁺/Li), oxidation of nitride ions proceeded to form adsorbed nitrogen atoms, which reacted with the surface to form AlN film. The obtained nitrided film had a thickness of sub-micron order. The obtained nitrided layer consisted of two regions; the outer layer involving AlN and aluminum oxynitride and the inner layer involving metallic Al and AlN. When Al electrode was anodically polarized at 2.0 V, anodic dissolution of Al electrode occurred to give aluminum ions, which reacted with nitride ions in the melt to produce AlN particles (1-5 μm of diameter) of wurtzite structure.     

Two‐way multi‐view 2‐D/3‐D display combining LC lens and HVxDP panel using novel pixel arrangement

We have developed a two‐way multi‐view 2‐D/3‐D display combining a liquid crystal lens and horizontally and vertically x times‐density pixels (HVxDP) arrangement. The two‐way multi‐view display features the same display resolution in 2‐D and 3‐D modes and a quite small color moiré for landscape and portrait, respectively, when using the HVxDP arrangement. In this paper, we realized suitable 3‐D properties for achieving a good balance between 3‐D moiré and 3‐D crosstalk for landscape and portrait by a two‐way liquid crystal lens with two kinds of focal lengths for the edge part and the center part of the lens.     

Peroxiredoxin 2 as a chemotherapy responsiveness biomarker candidate in osteosarcoma revealed by proteomics

Purpose : We aimed to identify novel chemotherapy responsiveness biomarkers for osteosarcoma (OS) by investigating the global protein expression profile of 12 biopsy samples from OS patients. Experimental design : Six patients were classified as good responders and six as poor responders, according to the Huvos grading system. The protein expression profiles obtained by 2‐D DIGE consisted of 2250 protein spots. Results : Among them, we identified 55 protein spots whose intensity was significantly different (Bonferroni adjusted p‐value<0.01) between the two patient groups. Mass spectrometric protein identification demonstrated that the 55 spots corresponded to 38 distinct gene products including peroxiredoxin 2 (PRDX 2). Use of a specific antibody against PRDX 2 confirmed the differential expression of PRDX 2 between good and poor responders, while PRDX 2 levels as measured by Western blotting correlated highly with their corresponding 2‐D DIGE values. The predictive value of PRDX 2 expression was further confirmed by examining an additional four OS cases using Western blotting. Conclusions and clinical relevance : These results establish PRDX 2 as a candidate for chemotherapy responsiveness marker in OS. Measuring PRDX 2 in biopsy samples before treatment may contribute to more effective management of OS.     

Traceable P2P record exchange: a database-oriented approach

In recent years, peer-to-peer (P2P) technologies are used for flexible and scalable information exchange in the Internet, but there exist problems to be solved for reliable information exchange. It is important to trace how data circulates between peers and how data modifications are performed during the circulation before reaching the destination for enhancing the reliability of exchanged information. However, such lineage tracing is not easy in current P2P networks, since data replications and modifications are performed independently by autonomous peers—this creates a lack of reliability among the records exchanged. In this paper, we propose a framework for traceable record exchange in a P2P network. By managing historical information in distributed peers, we make the modification and exchange histories of records traceable. One of the features of our work is that the database technologies are utilized for realizing the framework. Histories are maintained in a relational database in each peer, and tracing queries are written in the datalog query language and executed in a P2P network by cooperating peers. This paper describes the concept of the framework and overviews the approach to query processing.     

Avoiding Routing Loops on the Internet

Suppose that some particular link in the Internet is currently congested. A natural solution is to try to make packets bypass that link. This can be done by increasing the cost of that link intentionally, say from a ₁ to a ₂, since the Internet uses shortest-path routing. Unfortunately, however, this often causes temporary loops for packet traveling, called routing loops. In this paper we show that routing loops can be avoided by increasing the cost of the link not directly from a ₁ to a ₂ but through an intermediate value, a ₃, i.e., from a ₁ to a ₃ and then to a ₂. We may need several intermediate values. We show that in this case the greedy strategy, namely, raising the cost as much as possible in each step, is optimal.     

Back‐channel‐etched thin‐film transistor using c‐axis‐aligned crystal In–Ga–Zn oxide

Our crystalline In–Ga–Zn oxide (IGZO) thin film has a c‐axis‐aligned crystal (CAAC) structure and maintains crystallinity even on an amorphous base layer. Although the crystal has c‐axis alignment, its a‐axis and b‐axis have random arrangement; moreover, a clear grain boundary is not observed. We fabricated a back‐channel‐etched thin‐film transistor (TFT) using the CAAC‐IGZO film. Using the CAAC‐IGZO film, more stable TFT characteristics, even with a short channel length, can be obtained, and the instability of the back channel, which is one of the biggest problems of IGZO TFTs, is solved. As a result, we improved the process of manufacturing back‐channel‐etched TFTs.