Zur Fließfähigkeit von Schüttgütern – Definition und Meßverfahren

Flowability of Bulk Solids – Definition and Measuring Principles . The flowability of bulk solids has to be known for many practical applications. The present paper describes how the flowability is defined and on which physical properties it depends. Experimental determination of the flowability using a shear test is demonstrated. Conditions influencing measuremed results are described. Finally an overview of various methods used for characterization of the flowability of bulk solids is given.     

Na+ channel modulation and force-frequency relationship in human myocardium

Insect cell lines in culture are used for a variety of studies. In this laboratory imaginal disc cell lines have been established from primary cultures from third instar larvae, and used for a number of experiments. The effect of ageing on the morphology and physiology of Drosophila cell lines has received very little attention, although problems of genotypic or phenotypic changes in cell lines with age are recognized in other areas of animal cell culture. We tested our cell line Cl8+ for any difference in growth, morphology and response to 20-hydroxyecdysone (20HE) at different ages (passage numbers). The cells were found to multiply faster, adhere less firmly to the substrate and to lose the tendency to aggregate at higher passages. The response to 20HE in terms of cell numbers and induction of beta-galactosidase was similar at all passage numbers but morphological changes in hormone-treated cells were less obvious in the higher passages. Cell lines are likely to vary in the extent of ageing effects but workers are advised to be aware of the possibilities. We suggest the effects of age on cell lines should be established, and passage numbers noted in experimental reports.     

Isothermic growth of one spherulite around circular obstacles in a polypropylene foil

Growth of one spherulite within a thin foil of polypropylene around one circular obstacle or around combinations of circular obstacles is investigated. For each obstacle there exists a region of shadow, seen from the nucleus of the spherulite, which influences the growth of the spherulite. Within any region of shadow the growth fronts are evolvents of the obstacle's boundary, because the spherulite grows isotropically. When two growth fronts belonging to one spherulite meet each other inside the shadow, an intrinsic grain boundary is formed for each obstacle. Additionally, growth of one spherulite around a rectangular obstacle and a spherical obstacle is investigated.     

Localization of G-proteins in macrophages and E. coli during phagocytosis

Heterotrimeric GTP-binding proteins (G-proteins) have been shown to play an important role in cellular signalling. However, G-protein involvement in the intracellular spreading of bacterial pathogens is still poorly understood. In this study, antibodies, that recognize G-protein alpha-subunits (anti-G alpha), were used to investigate the localization of G-proteins in the macrophage-like cell line P388D1 and E. coli, also in their L-forms, during phagocytosis. In E. coli, anti-G alpha-binding sites were detected preferably in the cell wall and septa of the whole bacterial forms as well as in the cytoplasm of L-forms. Western blotting of bacterial lysates demonstrated protein bands with positive immunoreaction to antibodies against Gs alpha, Gi alpha, and Gcommon alpha with a higher affinity to the antibody against Gs alpha. Immunoreaction with the anti-Gs alpha-antibody was markedly higher in pathogenic strains of E. coli. Because of the conserved structure in all GTP-binding proteins which seem to derive from a single primordial protein involved in signal transduction mechanisms, it is reasonable to assume that some anti-Ga-positive proteins in E. coli might be related to G-proteins of higher organisms. A putative candidate for bacterial G-proteins seems to be a 36 kDa protein. Enhancement in G-protein immunostaining in the cytoplasm of macrophages around the internalized bacteria testifies to the involvement of G-proteins in mediation of endocytosis responses of phagocytes.     

High‐Tech‐Cellulose‐Funktionspolymere nach dem ALCERU®‐Verfahren

Functional High‐Tech‐Cellulose materials by the ALCERU® process Cellulose is one of the eldest materials of mankind. While the use of cellulose in former times was focused on application as a more construction or as a more textile material at present time the application profile turns to a more functional material using the ALCERU® process. Shaping of pure cellulose dissolution in NMMNO permits the manufacturing of materials for upholstery, filtration or biodegradable film strips having an uniform cross section. Fibreds, which can be applied in several packaging materials, are available using different techniques for regeneration cellulose. A great field of innovative functional cellulose materials is opened up by addition of several functional additives to cellulose dissolution. In this way piezo‐electrical conductive cellulose fibres (PZT) or high‐temperature filtration membranes are to be generated if one adds special types of ceramic powders. Above all PZT green fibres are applied in more recent uses as sensors or actuators. Electrically conductive cellulose fibres or filaments, which can be also used in the textile chain, can be prepared adding conductive carbon black to a cellulose dope on the same way, too. Cellulose material having adapted conductivity to different application is available by adding an exact defined amount of carbon black to cellulose dissolution. Finally cellulose beads can be manufactured by means of varied shaping technique. The beads are showing variable particle sizes and narrow pore size distribution. These properties open up very interesting application in the field of human blood purification or chromatography.     

Chord intercepts in a two-dimensional cell growth model

A foil of polypropylene is heat-treated in such a manner that a growing 2D cell-model is formed. A Rosiwal's line is placed into the totally primarily crystallized foil. The nucleus-coordinates of grains intercepting Rosiwal's line are measured. From these effective nuclei we determine at fraction transformedF = 1/4, 1/2 and 3/4 the distributions of grain-lengths and melt-lengths. Further we determine properties which are derived from the chord intercepts at a given F. Experimentally we find that the values (Poisson distribution of nuclei, chord intercepts, etc.) are in good agreement with the growing 2D cell-model.     

Relationships between process, microstructure and properties of molded zirconia micro specimens

Due to size effects the mechanical behavior of micro-components with dimensions in the range of some 100 μm and structure details of about 10 μm differs markedly from those of larger components. This is a crucial aspect for the design of micro-components for applications where demands for high strength are critical. The present study, which was performed in the frame of the Collaborative Research Centre 499 (SFB 499), approaches this issue by investigating the relationship between production process, microstructure and the mechanical properties of micro-specimens made from zirconia using two different feedstocks. The specimens were produced by a sintering process. The sintering temperature was varied between 1,300 and 1,500°C. Mechanical and tribological behavior of the specimens was determined by three-point bending tests as well as static and sliding friction tests, respectively. Properties derived from these tests were then correlated to the surface states in the specimens such as porosity, edge radius and roughness. The strength of the micro-specimens was found to be significantly influenced by these surface features. Whilst low porosity alone is not sufficient for high strength, notch effects resulting from pores as well as surface roughness can lower the strength. With increasing edge radius the strength of the material also increases. The porosity, edge radius and surface roughness were mathematically correlated with the strength to allow for a forecast. Within the SFB 499 feedstocks with specific properties were designed and reliable processes were developed to guarantee desirable surface roughness and porosity in the specimens. A characteristic bending strength of about 2,000 MPa is realizable in the micro-specimens within a good statistical reliability. The tribological tests revealed that the wear properties of the zirconia micro-components are strongly dependent on the quality of the feedstock.     

Fiber-optic probes with improved excitation and collection efficiency for deep-UV Raman and resonance Raman spectroscopy

The ability of ultraviolet resonance Raman spectroscopy (UVRRS) to determine structural, environmental, and analytical information concerning low-concentration aqueous biomolecules makes it a powerful bioanalytical and biophysical technique. Unfortunately, its utility has been limited by experimental requirements that preclude in situ or in vivo studies in most cases. We have developed the first high-performance fiber-optic probes suitable for long-term use in pulsed UVRRS applications in the deep- UV (DUV, 205-250 nm). The probes incorporate recently developed improved ultraviolet (IUV) fibers that do not exhibit the rapid solarization and throughput decay that previously hampered the use of optical fibers for delivering pulsed, DUV light. A novel 90 degrees mirrored collection geometry is used to overcome the inner-filtering effects that plague flush-probe geometries. The IUV fibers are characterized with respect to their efficacy at transmitting pulsed, DUV laser light, and prototype probes are used to obtain pulsed UVRRS data of aromatic amino acids, proteins, and hormones at low concentrations with 205-240-nm pulsed excitation. Efficient probe geometries and fabrication methods are presented. The performance of the probes in examining resonance-enhanced Raman signals from absorbing chromophores is investigated, and the optimal excitation wavelength is shown to be significantly red-shifted from the maximum of the resonance Raman enhancement profile. Generally applicable procedures for determining optimal experimental conditions are also introduced.