Reduced complexity two stage vector quantization

We address the issue of complexity for vector quantization (VQ) of wide-band speech LSF (line spectrum frequency) parameters. The recently proposed switched split VQ (SSVQ) method provides better rate–distortion (R/D) performance than the traditional split VQ (SVQ) method, even at the requirement of lower computational complexity, but at the expense of much higher memory. We develop the two stage SVQ (TsSVQ) method, by which we gain both the memory and computational advantages and still retain good R/D performance. The proposed TsSVQ method uses a full dimensional quantizer in its first stage for exploiting all the higher dimensional coding advantages and then, uses an SVQ method for quantizing the residual vector in the second stage so as to reduce the complexity. We also develop a transform domain residual coding method in this two stage architecture such that it further reduces the computational complexity. To design an effective residual codebook in the second stage, variance normalization of Voronoi regions is carried out which leads to the design of two new methods, referred to as normalized two stage SVQ (NTsSVQ) and normalized two stage transform domain SVQ (NTsTrSVQ). These two new methods have complimentary strengths and hence, they are combined in a switched VQ mode which leads to the further improvement in R/D performance, but retaining the low complexity requirement. We evaluate the performances of new methods for wide-band speech LSF parameter quantization and show their advantages over established SVQ and SSVQ methods.     

A parallel hp‐FEM infrastructure for three‐dimensional structural acoustics

This paper describes a parallel three‐dimensional numerical infrastructure for the solution of a wide range of time‐harmonic problems in structural acoustics and vibration. High accuracy and rate of error‐convergence, in the mid‐frequency regime,is achieved by the use of hp‐finite and infinite element approximations. The infrastructure supports parallel computation in both single and multi‐frequency settings. Multi‐frequency solves utilize concurrent factoring of the frequency‐dependent linear algebraic systems and are naturally scalable. Scalability of large‐scale single‐frequency problems is realized by using FETI‐DP—an iterative domain‐decomposition scheme. Numerical examples are presented to cover applications in vibratory response of fluid‐filled elastic structures as well as radiation and scattering from elastic structures submerged in an infinite acoustic medium. We demonstrate both the numerical accuracy as well as parallel scalability of the infrastructure in terms of problem parameters that include wavenumber and number of frequencies, polynomial degree of finite/infinite element approximations as well as the number of processors. Scalability and accuracy is evaluated for both single and multiple frequency sweeps on four high‐performance parallel computing platforms: SGI Altix, SGI Origin, IBM p690 SP and Linux‐cluster. Results show good performance on shared as well as distributed‐memory architecture. Copyright © 2006 John Wiley & Sons, Ltd.     

印度东部钛磁铁矿的氧化行为和相分析

钛磁铁矿是一种复杂的共生矿石,含有钛铁矿、磁铁矿、铁铝尖晶石和镁铁铝尖晶石等矿物。对从印度东部采集到的钛磁铁矿石进行XRD、WDXRF、SEM和M？ssbauer谱分析。在氧气气氛下,通过TG-DTA分析对矿石的氧化行为进行研究。随后,在氧气和空气气氛下,将样品在不同温度下（873-1473 K）保温不同时间,进行等温氧化实验。观察到在较低的温度下钛铁矿相转变为赤铁矿、氧化钛,而在较高的温度下转变为钛酸亚铁相。将氧化后的矿样与焦炭混合压制成圆柱形球团,在1473 K下进行直接还原,成功地实现了将磁铁矿铁转变为氧化铁和二氧化钛的相变。     

Comparative study on the structural make-up and mechanical behavior of silicon and silver doped amorphous carbon films

Silicon - Silicon (Si) and silver (Ag) doped amorphous carbon (a-C) thin film were deposited on chrome nitrided 316 LVM stainless steel using filtered cathodic vacuum arc (FCVA) deposition...     

Antimicrobial and Amyloidogenic Activity of Peptides. Can Antimicrobial Peptides Be Used against SARS-CoV-2?

At present, much attention is paid to the use of antimicrobial peptides (AMPs) of natural and artificial origin to combat pathogens. AMPs have several points that determine their biological activity. We analyzed the structural properties of AMPs, as well as described their mechanism of action and impact on pathogenic bacteria and viruses. Recently published data on the development of new AMP drugs based on a combination of molecular design and genetic engineering approaches are presented. In this article, we have focused on information on the amyloidogenic properties of AMP. This review examines AMP development strategies from the perspective of the current high prevalence of antibiotic-resistant bacteria, and the potential prospects and challenges of using AMPs against infection caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2).     

An enhanced Radial Basis Function Network for voltage stability monitoring considering multiple contingencies

This paper proposes a scheme for online voltage stability monitoring using an enhanced Radial Basis Function Network (RBFN). A single RBFN is used to predict MW margins for different contingencies. A sequential learning strategy is used along with a regularization technique to design the RBFN and the weights in the output layer are determined by using linear optimization. The proposed network can be adapted with changing operating scenario of the power system. A network pruning strategy is used to limit the growth of the network size due to adaptive training. The proposed scheme is applied on the New England 39-bus power system model.     

Hedgehog Antagonist Pyrimidine–Indole Hybrid Molecule Inhibits Ciliogenesis through Microtubule Destabilisation

One of the crucial regulators of embryonic patterning and tissue development is the Hedgehog‐glioma (Hh‐Gli) signalling pathway; its uncontrolled activation has been implicated in different types of cancer in adult tissues. Primary cilium is one of the important factors required for the activation of Hh signalling, as it brings the critical components together for key protein–protein interactions required for Hh pathway regulation. Most of the synthetic and natural small molecule modulators of the pathway primarily antagonise Smoothened (Smo) or other effectors like Hh ligand or Gli. Here, we report a previously described Hh antagonist, with a pyrimidine–indole hybrid (PIH) core structure, as an inhibitor of ciliogenesis. The compound is unique in its mode of action, as it shows perturbation of microtubule dynamics in both cell‐based assays and in vivo systems (zebrafish embryos). Further studies revealed that the probable targets are α‐tubulin and its acetylated form, found in the cytoplasm and primary cilia. PIH also showed axonal defasiculation in developing zebrafish embryos. We thus propose that PIH antagonises Hh signalling by repressing cilia biogenesis and disassembling α‐tubulin from its stabilised form.     

Hexafluorozirconic acid based surface pretreatments: Characterization and performance assessment

A new phosphate-free pretreatment from Henkel Corp. named TecTalis^®, was investigated. The treatment bath is composed of dilute hexafluorozirconic acid with small quantities of non-hazardous components containing Si and Cu. The corrosion resistance of treated steel was compared to samples treated in a phosphate conversion coating bath, in simple hexafluorozirconic acid and in TecTalis without the addition of the Cu-containing component. Atomic Force Microscopy (AFM) and Transmission Electron Microscopy (TEM) were used to characterize the coating surface morphology, structure and composition. A Quartz Crystal Microbalance (QCM) was used for studying film growth kinetics on thin films of pure Fe, Al and Zn. Electrochemical Impedance Spectroscopy (EIS) was performed on treated and painted steel for studying long-term corrosion performance of the coatings. The phosphate-free coating provided long-term corrosion performance comparable to that of phosphate conversion coatings. The coatings uniformly cover the surface in the form of 10–20 nm sized nodules and clusters of these features up to 500 nm in size. The coatings are usually about 20–30 nm thick and are mostly composed of Zr and O with enrichment of copper at randomly distributed locations and clusters.     

Factors controlling the time evolution of the corrosion potential of aluminum in alkaline solutions

The mechanism of corrosion of 99.99% purity aluminum in alkaline solutions was investigated, through detailed examination of open-circuit potential transients. These transients displayed a characteristic time dependence, in which the potential first decreased over a few seconds to a minimum of −1.7 to −1.9 V vs. Ag/AgCl, and then slowly increased over a period of hours. The value of the minimum potential of electropolished foils, along with its dependence on pH and aluminate ion concentration, indicated that it was determined by the Nernst potential for the oxidation of surface aluminum hydride (AlH₃). This finding supports the direct role of hydride in the dissolution process. The increase of anodic polarization after the minimum potential occurred in two stages, the first correlated with the buildup of surface hydride, and the second with surface enrichment of Cu and Fe impurities.     

Effect of curing conditions and ionic additives on properties of fly ash-lime compacts

In the present work the reaction between fly ash and lime in fly ash-lime compacts under water curing and steam curing conditions was studied thoroughly in relation to the processing conditions. Fly ash from different sources were collected, characterized, mixed with lime in different ratios and compacted. The compacts were cured with water and steam separately. The reduction in the free CaO content in these compacts was measured as a function of curing time and curing process. Role of two ionic additives, FeCl₃ and MgCl₂, on the reaction between fly ash and lime was also investigated by measuring the free CaO content. Kinetics of these reactions was studied by determining the reaction order and rate constants with respect to the free CaO content and it was observed that the curing conditions and additives affected the reaction kinetics significantly.