Separating n-alkane mixtures by exploiting differences in the adsorption capacity within cages of CHA, AFX and ERI zeolites

The saturation capacity of n-alkanes in CHA, AFX and ERI zeolites, that consist of cages separated by windows, decreases with increasing carbon number. The major aim of the present communication is to demonstrate the possibility of separating n-alkane mixtures relying on differences in saturation capacities. To investigate this possibility, Configurational-Bias Monte Carlo simulations for adsorption of C3–nC6, nC4–nC6, and nC5–nC6 mixtures in CHA, AFX and ERI were carried out for equimolar bulk fluid phase. These mixture simulations show that for operation at fluid phase fugacities below about 1 MPa, the adsorbed phase in equilibrium with the bulk vapor phase is predominantly the alkane with the longer chain length, i.e. nC6. However, for operation at pressures in excess of 1 MPa, the adsorbed phase in equilibrium with the bulk liquid phase is richer in the component with the smaller chain length. In some cases, the nC6 is practically excluded from the zeolite.     

Further characterisation of protease inhibitors from pigeon pea (cajanus cajan (l) millsp) seeds

Cajanus trypsin inhibitor (CTI) and Cajanus trypsin-chymotrypsin inhibitor (CTCI) previously purified from cv TAT-10 were further characterised. The modification of the inhibitors revealed the presence of lysine at the trypsin reactive site in both CTI and CTCI. Modification of tyrosine at the reactive site of CTCI did not abolish chymotrypsin inhibition suggesting the presence of leucine or phenylalanine as reported in other chymotrypsin inhibitors. CTCI did not contain tryptophan. Dissociation constants for the inhibitors with bovine trypsin were in the region of 0.69 nmol (CTCI) and 0.029 nmol (CTI). Although the protease inhibitors lost their inhibitory activity on exposure to 2-mercaptoethanol they remained attached to the enzyme. The inhibitors were not very effective against the protease from Helicoverpa armigera which is a serious field pest of Cajanus. Dissociation constants for the inhibitors with the larval enzyme were in the region of 100 nmol.     

Finite element crack growth algorithm for dynamic fracture

A new finite element crack growth algorithm has been developed to simulate dynamic fracture. In this algorithm, pseudo elements with very high initial density are placed below the crack plane and the density is reduced to zero in a gradual manner as the crack passes the element. A number of linear elastic and elasto-viscoplastic problems have been carried out to test the new algorithm. The results are compared with some of the existing crack growth models.     

Sequentially Enhanced Electrokinetic Remediation of Heavy Metals in Low Buffering Clayey Soils

This paper presents the results of an experimental investigation undertaken to evaluate different purging solutions to enhance the removal of multiple heavy metals, particularly chromium, nickel, and cadmium, from a low buffering clay, specifically kaolin, during electrokinetic remediation. Experiments were conducted on kaolin spiked with Cr(VI), Ni(II), and Cd(II) in concentrations of 1,000, 500, and 250 mg/kg, respectively, which simulate typical electroplating waste contamination. A total of five different tests were performed to investigate the effect of different electrode purging solutions on the electrokinetic remedial efficiency. A constant DC voltage gradient of 1 V/cm was applied for all the tests. The removal of heavy metals from the soil using tap water as the purging solution was very low. When 1 M acetic acid was used as the purging solution in the cathode, the removal of chromium, nickel, and cadmium was increased to 20, 19, and 13%, respectively. Using 0.1 M ethylene diamine tetraacetic acid as the purging solution in the cathode, 83% of the initial Cr was removed; however, the nickel and cadmium removal was very low. A sequentially enhanced electrokinetic remediation approach involving the use of water as a purging solution at both the anode and cathode initially, followed by the use of acetic acid as the cathode purging solution and a NaOH alkaline solution as the anode purging solution was tested. This sequential approach resulted in a maximum removal of chromium, nickel, and cadmium of 68–71, 71–73, and 87–94%, respectively. This study shows that the sequential use of appropriate electrode purging solutions, rather than a single electrode purging solution, is necessary to remediate multiple heavy metals in soils using electrokinetics.     

Prediction of the effects on dynamic response due to distributed structural modification with additional degrees of freedom

The aim of this study is to investigate means of efficiently assessing the effects of distributed structural modification on the dynamic properties of a complex structure. The dynamic properties of the modified structure can be determined by experimental testing or numerical simulation, both of which are complex, expensive and time-consuming. Assuming that the original dynamic characteristics are already established and that the modification is a relatively simple attachment, the modified dynamic properties may be determined numerically without solving the equations of motion of the full-modified structure. The frequency response functions (FRFs) of the modified structure can be computed by coupling the original FRFs and a delta dynamic stiffness matrix for the modification introduced. The validity of this approach is investigated by applying it to a cantilever beam to which a smaller beam is attached as modification. The original FRFs were obtained experimentally as well as numerically. The delta dynamic stiffness matrix was determined numerically by modeling the attachment and part of the original structure including the attachment points. The FRFs of the modified beam were then computed. Good agreement is obtained by comparing the results to the FRFs of the modified beam determined experimentally as well as by numerical modeling of the complete modified structure.     

Ionic mass transfer measurements in the case of submerged multijets impinging on to a flat surface

In the case of submerged multijets impinging on to a flat surface, the limiting current densities were measured at microelectrodes, fixed flush with the target surface using diffusion controlled electrode reactions (i.e. reduction of ferricyanide ion). The height of the multijet distributor from the target surface (Y) was varied from 5 to 9 cm. The numbers of holes of the distributor (N) studied were 76 and 141. The variation of mass transfer data with radial distance reveals the existence of two different regions, i.e. the impingement region and the wall jet region. The mass transfer rate increased with increase in Y in the impingement region. The effect of Y is negligible in the wall jet region. Decrease in N decreases the mass transfer rate in both the regions. The data are correlated separately for the two regions.     

On measures of vulnerability of interconnection networks

With the advent of distributed and multiple processing systems, the study of interconnection networks has developed into a field of its own. In most cases, the performance measures used to characterize the reliability of such networks have been primitive.It is our purpose, in this brief paper, to survey the many available measures of the vulnerability of interconnection networks. The most widely known is classical connectivity; however, measures more recently introduced in the graph theory literature are probably a better practical metric of reliability. Our objective is to make these measures more widely known, and to spur the development of good algorithms to calculate them in practical instances.     

Alternative Granulation Technique: Melt Granulation

A melt granulation process has been investigated (1, 2) which efficiently agglomerates pharmaceutical powders for use in both immediate- and sustained-release solid dosage forms. The process utilizes materials that are effective as granulating fluids when they are in the molten state. Cooling of the agglomerated powders and the resultant solidification of the molten materials completes the granulation process. Both the molten agglomeration and cooling solidification were accomplished in a high shear Collette Gral mixer equipped with a jacketed bowl. Hence, the melt granulation process replaces the conventional granulation and drying operations which use water or alcohol solutions. The melt granulation process has been investigated using immediate- and sustained-release TAVIST® (clemastine fumarate USP) tablet formulations. The TAVIST granulations have been characterized by power consumption monitoring, measurement of the granulation particle size distribution, bulk and tapped density determinations, and loss-on-drying measurements. Scale-up of the melt granulation process for the sustained release TAVIST tablet formulation was judged successful based on a comparison of the hardness, friability, weight uniformity during compression, disintegration time, and dissolution rate data obtained at different manufacturing scales.     

Multi purpose research reactor

At present Dhruva and Cirus reactors provide the majority of research reactor based facilities to cater to the various needs of a vast pool of researchers in the field of material sciences, physics, chemistry, bio sciences, research & development work for nuclear power plants and production of radio isotopes. With a view to further consolidate and expand the scope of research and development in nuclear and allied sciences, a new 20 MWt multi purpose research reactor is being designed. This paper describes some of the design features and safety aspects of this reactor.     

Quantifying DNS namespace influence

Name resolution using the Domain Name System (DNS) is integral to today’s Internet. The resolution of a domain name is often dependent on namespace outside the control of the domain’s owner. In this article we review the DNS protocol and several DNS server implementations. Based on our examination, we propose a formal model for analyzing the name dependencies inherent in DNS. Using our name dependency model we derive metrics to quantify the extent to which domain names affect other domain names. It is found that under certain conditions, more than half of the queries for a domain name are influenced by namespaces not expressly configured by administrators. This result serves to quantify the degree of vulnerability of DNS due to dependencies that administrators are unaware of. When we apply metrics from our model to production DNS data, we show that the set of domains whose resolution affects a given domain name is much smaller than previously thought. However, behaviors such as using cached addresses for querying authoritative servers and chaining domain name aliases increase the number and diversity of influential domains, thereby making the DNS infrastructure more vulnerable.