Model development and validation: Co-combustion of residual char, gases and volatile fuels in the fast fluidized combustion chamber of a dual fluidized bed biomass gasifier

A one-dimensional steady state model has been developed for the combustion reactor of a dual fluidized bed biomass steam gasification system. The combustion reactor is operated as fast fluidized bed (riser) with staged air introduction (bottom, primary and secondary air). The main fuel i.e., residual biomass char (from the gasifier), is introduced together with the circulating bed material at the bottom of the riser. The riser is divided into two zones: bottom zone (modelled according to modified two phase theory) and upper zone (modelled with core-annulus approach). The model consists of sub-model for bed hydrodynamic, conversion and conservation. Biomass char is assumed to be a homogeneous matrix of C, H and O and is modelled as partially volatile fuel. The exit gas composition and the temperature profile predicted by the model are in good agreement with the measured value.     

An efficient fragile watermarking scheme with multilevel tamper detection and recovery based on dynamic domain selection

Self-recoverable fragile watermarking is meant for accurate tamper localization as well as image recovery with superior visual quality. However, most of the existing state of art approaches perform authentication and recovery on block basis owing to which the entire block is categorized as tampered in case of alteration of one or more pixels of it. This, results in staircase formation of tamper detected regions, hence lacking in accuracy. Furthermore, the visual quality of the recovered image also deteriorates as an approximate value is assigned to all the block pixels corresponding to the altered region. The proposed watermarking scheme performs both authentication and recovery pixelwise. The authentication of each pixel is done via multi level tamper detection(MLTD) through three authentication bits based on value, location and neighbourhood information. The domain for image recovery is chosen dynamically based on the content of the block, may it be in spatial domain for smooth blocks or frequency domain for the rough ones. This provides high accuracy in recovery. As the embedding of recovery information is done in the frequency domain, the imperceptibility of the watermarked image scheme remains high. Also, embedding of authentication information in the spatial domain maintains its fragile nature. Even for higher tampering ratios, the lost content is rebuilt with high peak signal to noise ratio(PSNR) of the recovered image. The probabilities of false rejection and false acceptance head towards the ideal value for most of the empirical analysis. Comparative study via metric evaluation of probability of false rejection (PFR), probability of false acceptance (PFA) and PSNR of recovered image for different standard test cover images demonstrate the efficacy of the proposed scheme over other existing state of art approaches. Further, the security of the proposed scheme remains high due to usage of multi-layered secret keys and chaos based random mapping handling worst tamper scenarios.     

Proteome of human endometrium: Identification of differentially expressed proteins in proliferative and secretory phase endometrium

Purpose: To exploit the potential of proteomics to identify and study additional yet‐unidentified important proteins present in human endometrium. Experimental design: The proteome of human endometrium would be established using 2‐DE and MALDI and the data analyzed to identify differential protein expression in the proliferative and secretory phase of the menstrual cycle using PDQuest software and MALDI. Results: In the present work, 2‐DE of human endometrium protein led to the resolution of over 200 spots. Subsequent MALDI analysis of 215 spots allowed the identification of 194 proteins. A total of 57 out of the 215 spots were found to be differentially expressed, out of which 49 could be identified using MALDI. These differentially expressed proteins included structural proteins, molecular chaperones, signaling proteins, metabolic proteins, proteins related to immunity, RNA biogenesis, protein biosynthesis and others. The differential expressions of seven representative proteins in secretory and proliferative phase endometrium tissue were confirmed by immunoblot analysis. Conclusion and clinical relevance: This study establishes the 2‐D proteome of human endometrium represented by 194 identified protein spots. The present data provides an important clue towards determining the function of these proteins with respect to endometrium related diseases.     

Metabolic Pathways for Observed Impacts of Crop Load on Floral Induction in Apple

The triggers of biennial bearing are thought to coincide with embryonic development in apple and occurs within the first 70 days after full bloom (DAFB). Strong evidence suggests hormonal signals are perceived by vegetative apple spur buds to induce flowering. The hormonal response is typically referred to as the floral induction (FI) phase in bud meristem development. To determine the metabolic pathways activated in FI, young trees of the biennial bearing cultivar ‘Nicoter’ and the less susceptible cultivar ‘Rosy Glow’ were forced into an alternate cropping cycle over five years and an inverse relationship of crop load and return bloom was established. Buds were collected over a four-week duration within 70 DAFB from trees that had maintained a four-year biennial bearing cycle. Metabolomics profiling was undertaken to determine the differentially expressed pathways and key signalling molecules associated with biennial bearing. Marked metabolic differences were observed in trees with high and low crop load treatments. Significant effects were detected in members of the phenylpropanoid pathway comprising hydroxycinnamates, salicylates, salicylic acid biosynthetic pathway intermediates and flavanols. This study identifies plant hormones associated with FI in apples using functional metabolomics analysis.     

Blocking the PCNA/NKp44 Checkpoint to Stimulate NK Cell Responses to Multiple Myeloma

Simple SummaryMembrane-associated PCNA is expressed on the surface of human MM cell lines and primary MM cells. Mab 14-25-9 interacts with membrane-associated PCNA and blocks its binding to NK-expressed NKp44, thus activating NK function. We showed that mAb 14-25-9 can serve as an immune checkpoint blocker, enhancing the function of NK cells on target human MM cell lines and primary cells.AbstractMultiple Myeloma (MM) is a devastating malignancy that evades immune destruction using multiple mechanisms. The NKp44 receptor interacts with PCNA (Proliferating Cell Nuclear Antigen) and may inhibit NK cells’ functions. Here we studied in vitro the expression and function of PCNA on MM cells. First, we show that PCNA is present on the cell membrane of five out of six MM cell lines, using novel anti-PCNA mAb developed to recognize membrane-associated PCNA. Next, we stained primary bone marrow (BM) mononuclear cells from MM patients and showed significant staining of membrane-associated PCNA in the fraction of CD38⁺CD138⁺ BM cells that contain the MM cells. Importantly, blocking of the membrane PCNA on MM cells enhanced the activity of NK cells, including IFN-γ-secretion and degranulation. Our results highlight the possible blocking of the NKp44-PCNA immune checkpoint by the mAb 14-25-9 antibody to enhance NK cell responses against MM, providing a novel treatment option.     

Habitat structure influences below ground biocontrol services: A comparison between urban gardens and vacant lots

Urban agriculture offers a framework for local self-reliance by provisioning food security, employment opportunities, and other community benefits. However, urban agriculture must rely on the supporting and regulating services of the soil food web. Hence, we quantified belowground biocontrol activity in urban gardens and vacant lots in two post-industrial cities using an in situ insect baiting technique. Due to the differences in habitat structure, we hypothesized that belowground biocontrol services will differ between gardens and vacant lots and the influence of habitat structure would differ with the type of biocontrol organism. Results revealed that biocontrol activity, as assessed by % mortality of baited insects, varied between 51% and 98% with higher activity often recorded in vacant lots than gardens. Major contributions to bait insect mortality were by ants, followed by microbial pathogens and entomopathogenic nematodes, respectively. Ants showed higher (p < 0.0001) % mortality in vacant lots (60% ± 33.4%) than in urban gardens (33.3% ± 22.2%) whereas microbial pathogens exhibited higher (p < 0.0001) mortality in gardens (27.8% ± 15%) than vacant lots (8.3% ± 16.7%). Ants caused higher (p < 0.0001) mortality when larger-mesh size cages were used compared with the smaller-mesh size cages, but mortality by microbial pathogens did not differ with cage type. The high biocontrol activity indicates the resilience of the soil food web in urban ecosystems and the differential effects of habitat structure on biocontrol activity can help guide landscape planning and vegetation management to enhance urban environments and boost local self-reliance.     

A new method of determination of series and shunt resistances of silicon solar cells

A new method of measurement of series resistance R_s and shunt resistance R_sh of a silicon solar cell is presented. The method is based on the single exponential model and utilizes the steady state illuminated I–V characteristics in third and fourth quadrants and the V_oc–I_sc characteristics of the cell. It enables determination of values of R_sh and R_s with the intensity of illumination. For determination of R_s it does not require R_sh to be assumed infinite and realistic values of R_sh can be used. The method is very convenient to use and in the present study it has been applied to silicon solar cells having finite values of R_sh. We have found that R_sh is independent of intensity but the R_s decreases with both the intensity of illumination and the junction voltage.     

A subtle review on the challenges of photocatalytic fuel cell for sustainable power production

The revolution in the arena of functional materials for the development of well advanced engineered photocatalyst can efficiently harness photon energy from a wide spectrum of electromagnetic radiation. These next-generation smart materials would be a spectacular approach in designing devices such as photovoltaic cells, photoelectrochemical cells, and photocatalytic fuel cells. Photocatalytic oxidation of water or wastewater for concurrent production of hydrogen and electric current has turned out as a principal concept for the construction of modern photocatalytic fuel cells (PFCs). Such PFCs mimics reverse photosynthesis process where electrical energy is generated from organic pollutants. In recent years many reviews on focusing the design, fabrication, and theoretical efficiency of the PFCs have been published. Hence the present review is aimed to unveil the wall-to-wall information starting from fundamentals spanning to working principles, structural configuration, electrochemical degradation of pollutants and photoelectrochemical properties, electron transport, thermodynamic behavior and columbic efficiency of studied PFCs.     

Effect of matrix content on the performance of carbon paper as an electrode for PEMFC

Porous conducting carbon fiber‐based composite paper is used as an electrode backing in the fuel cell assembly. It not only acts as a channel through which the reactant and product gases pass to and from the bipolar plate and the catalyst site but also helps in the flow of electrons. In order to perform its role efficiently, it should have sufficient strength, high electrical conductivity, and ideal porous structure. Carbon paper has been fabricated, which builds up the required composite properties. Studies have been conducted to optimize the fiber/matrix ratio in the carbon paper, while ensuring the perfect combination of porosity, mechanical strength, and electrical conductivity for an electrode in a proton electrolyte membrane fuel cells. Detail physico‐mechanical and electrochemical characterizations further ascertain that the fiber/matrix ratio plays an important role in tuning the composite properties. The polarization curve of the unit proton exchange membrane (PEM) fuel cell (with an effective electrode area 4 cm²) shows a peak power density of 916 mW/cm² for the sample with fiber/matrix ratio of 65:35, which is almost the same as the commercially available sigracet gas diffusion layer (SGL) carbon paper tested under similar conditions. Further, proportionally enlarging the electrode area to 100 cm² shows that the carbon paper not only shows almost repeatable results in a given set up but also scales up.     

N,N,N-trimethyl chitosan as an efficient antibacterial agent for polypropylene and polylactide nonwovens

The paper presents a method of depositing N,N,N-trimethyl chitosan (TMC) layers onto polypropylene and polylactide nonwovens. A two-step modification procedure is applied: first, grafting the nonwovens with acrylic acid and next layer-by-layer deposition. Turbidimetric measurements confirm the creation of polycomplexes between grafted poly(acrylic acid) and deposited TMC. The created material structure is evaluated using gravimetric analysis, reflectance Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive spectroscopy measurements and pH-metric titration. The modified material exhibits good antibacterial properties against Gram-positive bacteria Staphylococcus aureus.