Response spectrum analysis of piping systems with elastic-plastic gap supports

A new seismic support device and its application in piping systems is described. The device, E-BAR (patented), can be cost effectively used for snubber replacement programs, mitigation of hydraulic transients, pipe whip and as a thermal stop. The device has pre-set gaps to allow free thermal movement. During a seismic or other dynamic load event, if the pipe movement exceeds the gap dimension, the device acts as an elastic or elastic-plastic restraint. The device also has a unique design feature for not exceeding the restraint force beyond a specified limit design value. To analyze piping systems with gap supports having elastic-plastic characteristics, modal analysis procedures for both response spectrum and time history methods are developed. The comparison of responses obtained from the procedures with nonlinear time history analysis and test results available in the literature shows excellent correlation. A pilot program conducted for snubber replacement with E-BARs demonstrates that the limit force feature of E-BAR makes them very attractive for snubber replacement. This is because a particular E-BAR with a specified limit design force can be selected, such that, the E-BAR replacing the snubber does not require any modifications be made to the existing support steel and hardware.     

Resistive and magnetic properties of Y1−x Zr x Ba2Cu3O7−δ and Y1−2x Zr x Eu x Ba2Cu3O7−δ superconductive compounds

The results of X-rays, electrical resistivities and magnetic studies performed on Y_−x Zr _x Ba₂Cu₃O_t7−δ and Y_1−2x Zr _x Eu _x Ba₂Cu₃O_7−δ superconducting compounds, in the temperature range 4.2–500 K and external fields up to 50 kOe are reported. The presence of zirconium decreases the superconducting transition temperatures,T _c. BelowT _c, the hysteresis loops narrow when the zirconium content increases. From the magnetization curves, the critical current densities were determined. A time dependence of the magnetizations of logarithmic form was found. The flux-pinning energy was estimated to beU ≃0.03 eV. Above the transition temperatures, Y_−x Zr _x Ba₂Cu₃O_t7−δ samples show a Pauli-type paramagnetism, while Y_1−2x Zr _x Eu _x Ba₂Cu₃O_7−δ compounds have, in addition, temperature-dependent contributions to the magnetic susceptibilities. The effective europium moments are ∼3.40 μ_B suggesting that the ion is in (+3) valence state.     

Non-darcy natural convection from a heated vertical plate in saturated porous media with mass transfer

The nonsimilar and self-similar flows for the steady natural convection over a vertical heated surface in a saturated porous medium with mass transfer using non-Darcy model have been studied under boundary layer approximations. The differential equations governing both the nonsimilar and self-similar flows have been solved numerically using an implicit finite-difference scheme developed by Keller. The results indicate that both heat transfer and velocity field are appreciably affected by the modified Grashof number and mass transfer except that the effect of the modified Grashof number on the heat transfer for large suction is very small. It is found that the maximum velocity occurs at the wall and it increases as the modified Grashof number or injection increases.     

Viscous dissipation and MHD hybrid nanofluid flow towards an exponentially stretching/shrinking surface

Neural Computing and Applications - The impact of viscous dissipation in hybrid nanofluid plays a prominent role in industrial applications, for instance, in polymer processing flows and...     

Studies regarding simulation process to static loading of the structures obtained from polylactic acid, 3D printed

Being a relatively new process, additive manufacturing needs many studies to be able to produce parts with the required properties. The aim of the paper is to establish whether, based on the physical and mechanical properties determined by tensile testing and by applying finite element analysis (FEA), viable results can be obtained regarding the behavior of the 3D printed structures at the different, static loading. The application of FEA for the tensile testing of 3D specimens led to the results close to those obtained by the tests. The values of the results obtained by simulation are higher by up to 7.2% compared with those recorded by tests. The simulation was applied both for the printed specimens from a single material and from two materials (multi-material). Regardless of the materials used in printing and the simulation method, the results of applying FEA are close to those recorded by testing.     

A new fuzzy regression algorithm

A new fuzzy regression algorithm is described and compared with conventional ordinary and weighted least-squares and robust regression methods. The application of these different methods to relevant data sets proves that the performance of the procedure described in this paper exceeds that of the ordinary least-squares method and equals and often exceeds that of weighted or robust methods, including the two fuzzy methods proposed previously (Otto, M.; Bandemer, H., Chemom. Intell. Lab. Syst. 1986, 1, 71. Hu, Y.; Smeyers-Verbeke, J.; Massart, D. L. Chemom. Intell. Lab. Syst. 1990, 8, 143). Moreover, we emphasize the effectiveness and the generality of the two new criteria proposed in this paper for diagnosing the linearity of calibration lines in analytical chemistry.     

Synthesis of the Supermalloy Powders by Mechanical Alloying

The mixture of the Ni, Fe and Mo elemental powders with the nominal composition of the Supermalloy was milled in a planetary mill under Ar atmosphere. Several milling times have been used ranging from 4 to 16 h. A heat treatment of 30 min, 1, 2 and 4 h at temperature of 350°C has been performed in vacuum in order to improve the alloying process and remove the internal stresses. The formation of the Fe-Ni-Mo alloys by mechanical alloying was evidenced by X-ray diffraction. The nanocrystalline Supermalloy powders have been obtained after 16 h milling and after 8 h milling followed by 4 h annealing. A typical grain size of 11 ± 2 nm have been obtained after 16 h milling. The chemical homogeneity composition and the morphology of the powder particles have been studied by X-ray microanalysis and scanning electron microscopy respectively.     

Localization processes near the superconductor-insulator transition in Bi2Sr2 − xLaxCuOy nanoscale thin films

Thin film Bi₂Sr_2 − xLa_xCuO_y (x = 0.6) was deposited onto SrTiO₃ by using DC magnetron sputtering. The structural characterization was carried by X-ray diffraction and the transport properties were carried by resistivity and Hall Effect measurements. The underdoped system near superconductor-insulator transition (SIT) was performed by partial substitution of Sr with x = 0.6 La. By varying the oxygen content in very small amounts through a vacuum anneal process, a highly precise hole-doping of thin film was obtained and the same film is changed from initial superconducting state to strongly insulating underdoped state. More than 14 doping states in the vicinity of SIT were performed and studied by electrical resistivity as function of temperature. The thermally activated behavior, log (1/T) behavior or electrical resistivity and VRH localization processes were evidenced function of doping and temperature.     

Microstructure and flow behaviour during backward extrusion of semi-solid 7075 aluminium alloy

The microstructure and flow behaviour during thixo backward extrusion of 7075 aluminium alloy were investigated. Reheating the steel die and the aluminium billet placed into the die at the same time using an induction furnace provides rapidly a very homogeneous microstructure suitable for thixoforming. During thixoextrusion, despite the high solid fraction, the solid globules are weakly connected and slide over each other without any plastic deformation. The flow remains quasi homogeneous resulting in homogeneous induced microstructure of the component.