Solving thermal and phase change problems with the eXtended finite element method

 The application of the eXtended finite element method (X-FEM) to thermal problems with moving heat sources and phase boundaries is presented. Of particular interest is the ability of the method to capture the highly localized, transient solution in the vicinity of a heat source or material interface. This is effected through the use of a time-dependent basis formed from the union of traditional shape functions with a set of evolving enrichment functions. The enrichment is constructed through the partition of unity framework, so that the system of equations remains sparse and the resulting approximation is conforming. In this manner, local solutions and arbitrary discontinuities that cannot be represented by the standard shape functions are captured with the enrichment functions. A standard time-projection algorithm is employed to account for the time-dependence of the enrichment, and an iterative strategy is adopted to satisfy local interface conditions. The separation of the approximation into classical shape functions that remain fixed in time and the evolving enrichment leads to a very efficient solution strategy. The robustness and utility of the method is demonstrated with several benchmark problems involving moving heat sources and phase transformations. Received 20 May 2001 / Accepted 19 December 2001     

Fractal characterization of the fissures occuring during polymerization of low-profile unsaturated polyester resins

Blends of unsaturated polyester resin and polyvinylacetate (PVAc) were cured between two glass slides. In this case, the low-profile effect arises by fissuring with a fractal geometry. This paper shows how the fractal dimension of the fissures depends on the PVAc amount and on the cure temperature. These results are discussed with the present knowledge about the polyester network morphology in two phases more or less co-continuous.     

Cyclic Nanoindentation for Local High Cycle Fatigue Investigations: A Methodological Approach Accounting for Thermal Drift

Cyclic nanoindentation allows characterizing the influence of single phases and their interactions on fatigue mechanisms. Herein, a method for high cycle fatigue testing by nanoindentation is presented. By combining high- and low-frequency indentation modes, high cycle numbers are achieved while obtaining sufficient data points to reconstruct force–displacement hysteresis loops. A challenge is the stochastic course of thermal drift which is addressed by measuring drift rate in regular low-force holding segments. Drift rates are used to correct the displacement values, yielding reproducible cyclic deformation data as it is shown for two very different materials, a ductile metal and a brittle ceramic.     

Protein Kinases and Parkinson’s Disease

Currently, the lack of new drug candidates for the treatment of major neurological disorders such as Parkinson’s disease has intensified the search for drugs that can be repurposed or repositioned for such treatment. Typically, the search focuses on drugs that have been approved and are used clinically for other indications. Kinase inhibitors represent a family of popular molecules for the treatment and prevention of various cancers, and have emerged as strong candidates for such repurposing because numerous serine/threonine and tyrosine kinases have been implicated in the pathobiology of Parkinson’s disease. This review focuses on various kinase-dependent pathways associated with the expression of Parkinson’s disease pathology, and evaluates how inhibitors of these pathways might play a major role as effective therapeutic molecules.     

Survivability of Salmonella and Shigella spp. in sodium lauryl sulfate and tween 80 at 22 and 40 degrees C

Fresh produce has been implicated in several foodborne disease outbreaks. A primary site of contamination during production and handling is the surface of produce. One approach to reducing contamination is to treat fresh produce with rinsing agents. Studies have examined the efficacies of detergents and other rinses in recovering pathogens from produce surfaces. The determination of how these detergents affect bacterial cells may aid in understanding the mechanisms behind their removal. This study examines the survivability of Salmonella and Shigella in two detergents. A 0.1% sodium lauryl sulfate (SLS) solution, a 0.1% Tween 80 solution, and water were inoculated with a cocktail of stationary-phase organisms (3 log CFU/ml) and incubated for up to 32 h at 22 degrees C and 40 degrees C. Samples were taken over time and plated on tryptic soy agar supplemented with 50 ppm of nalidixic acid. Salmonella survived in all solutions and exhibited significant growth in water (0.8 log CFU/ml at 22 degrees C and 1.9 log CFU/ml at 40 degrees C) and Tween 80 (1.0 log CFU/ml at 40 degrees C). Shigella survived in all solutions at 22 degrees C and exhibited a growth level of 2.0 log CFU/ml in SLS. Shigella also survived in all solutions at 40 degrees C, although its populations decreased significantly in Tween 80 over time. Elevated temperatures may allow Tween 80 to kill Shigella spp. over time. Overall, the detergents tested were not detrimental to the cells; therefore, if these solutions were to be used as produce rinse agents, they would aid in removal of organisms from surfaces rather than kill the cells.     

Durability of sheet molding compounds: Influence of hydrothermal aging on morphology and molecular mobility at microscopic scale

The physicochemical aging for parts of Sheet Molding Compound should be considered for their lifetime management and reusability. This material has a complex morphology and contains porosity due to the process and to shrinkage compensation. This SMC study has two complementary approaches. One describes the morphological consequences of water uptake, showing the decrease in the total amount and the fractal dimension of micro-voids by scanning electron microscopy and image processing. The other shows, by mechanical spectrometry, the effect of water on physical or chemical bonds. In both cases, the “low profile agent” in SMC plays an important role. The molecular mobility was taken as a sensor parameter for the structural changes at the molecular scale, highlighting and quantifying the first steps of the aging. The loss factor level increases, and the activation energies are modified, even for the first aging days. The analysis shows recovery for the material near the relaxation peak of the low profile agent, since the curve recovers its initial shape.     

Photo-Fenton-like treatment of BPA: Effect of UV light source and water matrix on toxicity and transformation products

UV-A (near-UV), UV-C (short-UV) and visible-light assisted Fenton-like treatment of Bisphenol A (BPA) was investigated in pure water and raw freshwater samples spiked with BPA. Treatment performances were evaluated in terms of BPA degradation, dissolved organic carbon (DOC) removal and H₂O₂ consumption rates. Complete BPA degradation accompanied with significant DOC removal was achieved for all studied processes. Increasing the initial solution pH only exhibited a negative effect on treatment efficiencies when bicarbonate alkalinity was used for pH adjustment, whereas the raw freshwater matrix and irradiation type also influenced oxidation rates appreciably. Acute toxicity analysis employing Vibrio fischeri revealed that the inhibitory effect of BPA decreased significantly during the course of Photo-Fenton-like treatment. Several transformation products could be identified via HPLC and GC–MS analyses including hydroxylated phenolic compounds (hydroquinone; 2-methoxy, 1-4-benzenediol; 4-isopropenylphenol; 4′-hydroxy-acetophenone; 1-(4-cyclohexylphenyl) ethanone; 4-isopropylenecatechol; 4-4′-dihydroxybenzophenone; 4-ethyl,1,3-benzenediol), as well as the ring opening products hexanoic acid methyl ester, fumaric, succinic and oxalic acids. A reaction pathway featuring hydroxylation, dimerization and ring opening steps is proposed.     

30-kVA Transistor Inverter Auxiliary Power Supply for People Mover, Part I-Power Circuit

The design and performance of a people mover?a 30- kVA 400-Hz transistor inverter which furnishes all loads, except propulsion power, on a small advanced urban transit vehicle?is described in this first installment of a two part sequence of papers. With a nominal 750-V dc input, the inverter supplies 30 kVA at 0.8-lagging power factor, 200-V line-to-line root mean square (rms), and three- phase 400-Hz output. The design and performance of the power circuit is described in Part I, and the design and performance of the control is covered in Part II.     

Accent Patterning on Domain-Related Information in Swedish Travel Dialogues

Investigation of travel-domain dialogues reveals travel-agent (System) utterances with intonational contours characterized by late-timed focal accents on given information. These accents occur on content words in utterance-initial position. The accentuation can be assumed to be related to the interactive nature of the dialogue in which the travel agent links back to a domain-related concept introduced by the client (User) and comments on it in an engaged manner. A perception test using constructed human-machine dialogues in which the machine (synthesized) responses vary as to the type of accent pattern on the initial words was developed to test listeners' preference for accent type. Results indicate that i) focal accents on domain-related utterance-initial given concepts are indeed preferred to nonfocal accents and that ii) late-timed focal accents are preferred to early-timed focal accents. These results have implications for the design of the prosody-generating component of human-machine dialogue systems.     

Effects of modified atmosphere packaging on toxin production by Clostridium botulinum in raw aquacultured summer flounder fillets (Paralichthys dentatus)

Packaging fishery products under vacuum atmosphere packaging (VAC) and modified atmosphere packaging (MAP) conditions can significantly extend the shelf life of raw, refrigerated fish products. There is considerable commercial interest in marketing VAC and MAP refrigerated (never frozen) raw fish fillets. The objective of this study was to determine if Clostridium botulinum toxin development precedes microbiological spoilage in raw, refrigerated flounder fillets. Aquacultured flounder (Paralichthys dentatus) individual fish fillets either were packed with a film having an oxygen transmission rate (OTR) of 3000 cm3 m(-2) 24 h(-1) at 22.8 degrees C or were vacuum packaged or packaged under 100% CO2 with a film having an OTR of 7.8 cm3 m(-2) 24 h(-1) at 21.1 degrees C and were stored at 4 and 10 degrees C. Samples were analyzed by aerobic plate count (APC) for spoilage and qualitatively for botulinum toxin with a mouse bioassay. The results demonstrate that flounder fillets (4 degrees C) packaged with a film having an OTR of 3,000 were microbiologically spoiled (APC, > 10(7) CFU/g) on day 15, but there was no toxin formation, even after 35 days of storage. However, at 10 degrees C, toxin production occurred (day 8), but it was after microbial spoilage and absolute sensory rejection (day 5). Vacuum-packaged fillets and 100% CO2 fillets (4 degrees C) packaged with a film having an OTR of 7.8 were toxic on days 20 and 25, respectively, with microbial spoilage (APC, >10(7) CFU/g) not occurring during the tested storage period (i.e., >35 days). At 10 degrees C, in vacuum-packaged flounder, toxin formation coincided with microbiological spoilage (days 8 to 9). In the 100% CO2-packaged fillets, toxin formation occurred on day 9, with microbial spoilage occurring on day 15. This study indicates that films with an OTR of 3,000 can be used for refrigerated fish fillets and still maintain the safety of the product.