Zooplankton population in the river tigris: Effects of samarra impoundment

The influences of the Samarra impoundment on the ecology of the downstream sector of the river Tigris are investigated. Zooplankton were collected monthly from July 1987 to July 1988. It was found that zooplankton were most abundant during high river discharges in March. During the month of low river discharge, September, the zooplankton population was greatly reduced immediately below the barrage and remained so to the last downstream station. Several factors seem to explain such differences. The high discharge from the impoundment was found to be the dominating factor and may flush the small backwaters in which zooplankton were abundant, thus increasing the population in the river. Zooplankton species vary in their ability to sustain populations in the river, variations which are due mainly to species-specific characteristics.     

Synthesis and thermomechanical characterization of polyurethane elastomers extended with α,ω‐alkane diols

A series of polyurethane (PU) elastomers was prepared by the reaction of poly(?‐caprolactone) and 4,4′‐diphenylmethane diisocyanate, which was extended with a series of chain extenders (CEs) having 2–10 methylene units in their structure. The completion of the reaction was confirmed by Fourier transform infrared spectroscopy. The chemical structures of the synthesized PU samples were characterized with Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR spectroscopy, and the thermal properties were determined by thermogravimetric analysis, DSC, and dynamic mechanical thermal analysis techniques. The mechanical properties were also studied and are discussed. The thermogravimetric analysis and DSC analysis showed that CE length had a considerable effect on the thermal properties of the prepared samples. The dynamic mechanical thermal analysis and damping peaks were also affected by the number of methylene units in the CE length. The elastomer extended with 1,2‐ethane diol exhibited optimum thermal properties, whereas the elastomer based on 1,10‐decane diol displayed the worst thermal properties. Tensile strength and elongation at break decreased with increasing CE length, whereas hardness showed the opposite trend. The glass‐transition temperature moved toward lower temperatures with increasing CE length. The decrease in the glass‐transition temperature and tensile properties were interpreted in terms of decreasing hard segments and increasing chain flexibility. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Observability by using viability kernels

The aim of this paper is to propose a new way to deal with observability of systems governed by ODEs, in a more general setting than the standard output equation.The primary finding is that observability over a time horizon reduces to single-valuedness of the vertical section of a set we name the observability kernel.The latter consists of the viability kernel of the output domain under the augmented system.The approach may be used either for global or local observability,to which available results on single-valuedness of multifunctions shall be applied in order to get necessary and/or sufficient characterizing conditions.Several examples are provided in order to illustrate the method.     

Autonomous mapping of HL7 RIM and relational database schema

Healthcare systems need to share information within and across the boundaries in order to provide better care to the patients. For this purpose, they take advantage of the full potential of current state of the art in healthcare standards providing interoperable solutions. HL7 V3 specification is an international message exchange and interoperability standard. HL7 V3 messages exchanged between healthcare applications are ultimately recorded into local healthcare databases, mostly in relational databases. In order to bring these relational databases in compliance with HL7, mappings between HL7 RIM (Reference Information Model) and relational database schema are required. Currently, RIM and database mapping is largely performed manually, therefore it is tedious, time consuming, error prone and expensive process. It is a challenging task to determine all correspondences between RIM and schema automatically because of extreme heterogeneity issues in healthcare databases. To reduce the amount of manual efforts as much as possible, autonomous mapping approaches are required. This paper proposes a technique that addresses the aforementioned mapping issue and aligns healthcare databases to HL7 V3 RIM specifications. Furthermore, the proposed technique has been implemented as a working application and tested on real world healthcare systems. The application loads the target healthcare schema and then identifies the most appropriate match for tables and the associated fields in the schema by using domain knowledge and the matching rules defined in the Mapping Knowledge Repository. These rules are designed to handle the complexity of semantics found in healthcare databases. The GUI allows users to view and edit/re-map the correspondences. Once all the mappings are defined, the application generates Mapping Specification, which contains all the mapping information i.e. database tables and fields with associated RIM classes and attributes. In order to enable the transactions, the application is facilitated with the autonomous code generation from the Mapping Specification. The Code Generator component focuses primarily on generating custom classes and hibernate mapping files against the runtime system to retrieve and parse the data from the data source—thus allows bi-directional HL7 to database communication, with minimum programming required. Our experimental results show 35–65% accuracy on real laboratory systems, thus demonstrating the promise of the approach. The proposed scheme is an effective step in bringing the clinical databases in compliance with RIM, providing ease and flexibility.     

Synthesis of telechelic monodispersed diols

Summary The synthesis of telechelic monodispersed diols produced from the radical telomerization of an excess of undecylenol with commercialy available , -dithiols HSC₂H₄XC₂H₄SH (X=0, S or CH₂) initiated by peroxides is presented. In each case, the diols were obtained selectively and quantitatively and they were characterized by both ¹H and ¹³C NMR. Their physical characteristics (Tg, T_m and decomposition temperatures) were determined. Such compounds are thermally more stable than polydispersed telechelic commercially available diols.     

Cumin Prevents 17β-Estradiol-Associated Breast Cancer in ACI Rats

Breast cancer (BC) is a leading cause of cancer deaths in women in less developed countries and the second leading cause of cancer death in women in the U.S. In this study, we report the inhibition of E2-mediated mammary tumorigenesis by Cuminum cyminum (cumin) administered via the diet as cumin powder, as well as dried ethanolic extract. Groups of female ACI rats were given either an AIN-93M diet or a diet supplemented with cumin powder (5% and 7.5%, w/w) or dried ethanolic cumin extract (1%, w/w), and then challenged with subcutaneous E2 silastic implants (1.2 cm; 9 mg). The first appearance of a palpable mammary tumor was significantly delayed by both the cumin powder and extract. At the end of the study, the tumor incidence was 96% in the control group, whereas only 55% and 45% animals had palpable tumors in the cumin powder and extract groups, respectively. Significant reductions in tumor volume (660 ± 122 vs. 138 ± 49 and 75 ± 46 mm³) and tumor multiplicity (4.21 ± 0.43 vs. 1.16 ± 0.26 and 0.9 ± 0.29 tumors/animal) were also observed by the cumin powder and cumin extract groups, respectively. The cumin powder diet intervention dose- and time-dependently offset E2-related pituitary growth, and reduced the levels of circulating prolactin and the levels of PCNA in the mammary tissues. Mechanistically, the cumin powder diet resulted in a significant reversal of E2-associated modulation in ERα, CYP1A1 and CYP1B1. Further, the cumin powder diet reversed the expression levels of miRNAs (miR-182, miR-375, miR-127 and miR-206) that were highly modulated by E2 treatment. We analyzed the composition of the extract by GC/MS and established cymene and cuminaldehyde as major components, and further detected no signs of gross or systemic toxicity. Thus, cumin bioactives can significantly delay and prevent E2-mediated mammary tumorigenesis in a safe and effective manner, and warrant continued efforts to develop these clinically translatable spice bioactives as chemopreventives and therapeutics against BC.     

Enhanced anti-biofilm activity of facile synthesized silver oxide nanoparticles against K. pneumoniae

Journal of Inorganic and Organometallic Polymers and Materials - The silver oxide nanoparticle was successfully synthesized using floral waste by simple one pot, cost effective method. The complete...     

An open-source multi-DOF articulated robotic educational platform for autonomous object manipulation

This research presents an autonomous robotic framework for academic, vocational and training purpose. The platform is centred on a 6 Degree Of Freedom (DOF) serial robotic arm. The kinematic and dynamic models of the robot have been derived to facilitate controller design. An on-board camera to scan the arm workspace permits autonomous applications development. The sensory system consists of position feedback from each joint of the robot and a force sensor mounted at the arm gripper. External devices can be interfaced with the platform through digital and analog I/O ports of the robot controller. To enhance the learning outcome for beginners, higher level commands have been provided. Advanced users can tailor the platform by exploiting the open-source custom-developed hardware and software architectures. The efficacy of the proposed platform has been demonstrated by implementing two experiments; autonomous sorting of objects and controller design. The proposed platform finds its potential to teach technical courses (like Robotics, Control, Electronics, Image-processing and Computer vision) and to implement and validate advanced algorithms for object manipulation and grasping, trajectory generation, path planning, etc. It can also be employed in an industrial environment to test various strategies prior to their execution on actual manipulators.     

Novel high strength graphitic foams

A novel high strength graphitic foam was produced through the incorporation of carbon nanofibers into a pitch based precursor. The nanofiber reinforced cellular foams were mechanically tested both from a localized and bulk perspective with results indicating enhanced foam performance with nanofiber addition. The magnitude of increased performance was a result of both the nanofiber itself as well as its heat treatment as an increase in each was found to cause an associated increase in foam performance. The increase in mechanical capability is attributed to the formation of a zigzag structure in the ligaments and nodes of the foam. This zigzag structure serves as an interlocking mechanism, preventing easy shearing of the graphene layers. The in situ fracture mechanics experiment shows brittle behavior of a single ligament indicating that only reinforced foam behaves like that of a carbon fiber.