Photocatalytic Property and Electronic Structure of Lanthanide-based Oxysulfides

Lanthanide-based oxysulfides and sulfide, LnTaO_3.5S_0.5, Ln₁₀OS₁₄ (Ln = La, Pr, Nd, Sm) and La₄In₅S₁₃, were successively synthesized by sulfurization in a flowing H₂S. The sulfurization decreased the band-gap energies from >4 eV to <3eV, because of the formation of occupied S3p orbitals on the top of valence band. In accordance with the small band gap, the H₂ evolution from a 0.01 M Na₂S and 0.01 M Na₂SO₃ solution system was observed under irradiation of light up to >500 nm. The rate of H₂ evolution under light irradiation of >500 nm increased in the order of Ni/LaTaO_3.5S_0.5 < Ru/La₁₀OS₁₄ < Pt/La₄In₅S₁₃.     

NiCoFe/C cathode electrocatalysts for direct ethanol fuel cells

A direct ethanol fuel cell (DEFC), which is less prone to ethanol crossover, is reported. The cell consists of PtRu/C catalyst as the anode, Nafion^® 117 membrane, and Ni–Co–Fe (NCF) composite catalyst as the cathode. The NCF catalyst was synthesized by mixing Ni, Co, and Fe complexes into a polymer matrix (melamine-formaldehyde resins), followed by heating the mixture at 800 °C under inert atmosphere. TEM and EDX experiments suggest that the NCF catalyst has alloy structures of Ni, Co and Fe. The catalytic activity of the NCF catalyst for the oxygen reduction reaction (ORR) was compared with that of commercially available Pt/C (CAP) catalyst at different ethanol concentrations. The decrease in open circuit voltage (V_oc) of the DEFC equipped with the NCF catalysts was less than that of CAP catalyst at higher ethanol concentrations. The NCF catalyst was less prone to ethanol oxidation at cathode even when ethanol crossover occurred through the Nafion^®117 film, which prevents voltage drop at the cathode. However, the CAP catalyst did oxidize ethanol at the cathode and caused a decrease in voltage at higher ethanol concentrations.     

High-performance and highly stable 0.3-nm-full-width-at-half-maximum interference optical filters

Fabrication of very-narrow-bandpass optical tunable filters [(0.3 nm full width at half-maximum) (FWHM)] is reported. To improve the film densities, the O(2) ion-assisted deposition-method is used in the fabrication. In the succession of high- and low-refractive-index layers, the commonly used TiO(2) material is replaced by Ta(2)O(5), which suits the ion-assisted fabrication technique. The relative thicknesses of the filter multilayer structure of 1/2/1 are modified to 0.998/2.007/0.998, which reduces the shift difference in the central wavelengths with regard to the p and s polarizations when the filter is tilted. These improvements enabled fabrication of 0.3-nm-FWHM optical tunable filters with improved stability characteristics.     

Revolving Vernier Mechanism Controls Size of Linear Homomultimer

A new kind of the Vernier mechanism that is able to control the size of linear assembly of DNA origami nanostructures is proposed. The mechanism is realized by mechanical design of DNA origami, which consists of a hollow cylinder and a rotatable shaft in it connected through the same scaffold. This nanostructure stacks with each other by the shape complementarity at its top and bottom surfaces of the cylinder, while the number of stacking is limited by twisting angle of the shaft. Experiments have shown that the size distribution of multimeric assembly of the origami depends on the twisting angle of the shaft; the average lengths of the multimer are decamer, hexamer, and tetramer for 0°, 10°, and 20° twist, respectively. In summary, it is possible to affect the number of polymerization by adjusting the precise shape and movability of a molecular structure.     

Ergonomic design and evaluation of the handle for an endoscopic dissector

The purpose of this study was to design an endoscopic dissector handle and objectively assess its usability. The handles were designed with increased contact area between the fingers and thumb and the eye rings, and the eye rings were modified to have a more perpendicular insertion angle to the finger midline. Four different handle models were compared, including a conventional product. Subjects performed dissection, exclusion, grasping, precision manipulation and precision handling tasks. Electromyography and subjective evaluations were measured. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability. The activity of the first dorsal interosseous muscle was sometimes influenced by the shape of the other parts. The ergonomically designed endoscopic dissector handle used in this study achieved high usability. Medical instrument designs based on ergonomic concepts should be assessed with objective indices.

Practitioner Summary: The endoscopic dissector handles were designed with increased contact area and more suitable insertion angle between the fingers and thumb and the eye rings. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability.     

A record-linkage study on risk factors for cause-specific infant mortality

Infant death certificates were linked with birth certificates for infants born to residents of Tohoku, Tokai and Kyushu regions in 1989 (n = 409, 679, or about one-third of all births in Japan), to examine the effects of variables, as reported on birth certificates, on cause-specific infant mortality. "Certain conditions originating in the perinatal period" and "congenital anomalies" accounted for nearly 90 percent of neonatal deaths, while "congenital anomalies", "injuries and poisoning" and "sudden infant death" were responsible for about 65 percent of postneonatal deaths. Mortality rates for almost all causes of infant deaths, except injuries and poisonings, increased as birth weight decreased not only in the neonatal period but also in the postneonatal period. This suggests that low birth weight places some infants at higher risk of death, and conditions that lead to low birth weight independently contribute to the risk of infant death. Cox's proportional hazards linear model was used to assess the effects of variables on infant mortalities by causes of death. An extremely strong birth weight effect was noted for "certain conditions originating in the perinatal period" and "congenital anomalies". Being a male infant and late order of birth in multiparity were other risk factors for deaths from "congenital anomalies", while being a male infant, resident of Tohoku region and maternal stillbirth experience related to deaths from "certain conditions originating in the perinatal period". Elevated risks of sudden infant death syndrome (SIDS), of which mortality rate in Japan was considerably lower than those in most developed Western countries, i.e. 0.23 per 1,000 live births in 1989, were associated with low birth weight, being a male infant, low maternal age, late order of birth in multiparity and illegitimacy. Low maternal age, late order of birth in multiparity and illegitimacy, also, related significantly to increased risk of infant deaths for "injuries and poisoning". These results suggest the independent contributions of socioeconomic factors to infant mortality, especially postneonatal mortality, from SIDS, "injuries and poisonings".     

Zur Strukturaufklärung der Bromierungsprodukte von N-Aryl-2,4-dimethyl-buta-1,3-dien-sultamen-1,4

Structure Elucidation of Bromination Products of N-Aryl-2, 4-dimethyl-buta-1,3-diene-sultames-1, 4 The structure of bromination products of N-aryl-2, 4-dimethyl-buta-1, 3-diene-sultames-1, 4 1a–d , f is determined by 13-C-n.m.r. spectroscopy. As mono bromination product of N-phenylsultam 1a the 4-bromomethyl derivative 2a was isolated. Dibromination of sultames 1 yields 1-brom-4-brommethyl-sultames 3 and by tribromination 1,3-dibrom-4-brommethyl-sultames 4 are obtained.     

Shear properties of metal-free wooden load-bearing walls using plywood jointed with a combination of adhesive tape and wood dowels

In this study, the potential of wood-only (metal-free) load-bearing walls was proposed and tested based on the idea of using the same type of material throughout wherever possible while improving basic properties such as strength, sound insulation, and heat insulation. Specifically, a technique was tested of combining pressure sensitive adhesive tape and wood dowels in place of nails for load-bearing structures with panel reinforcement represented by wood-frame construction. For this paper, its strength was evaluated by conducting in-plane shear tests, which revealed that the initial rigidity and maximum load of the proposed test specimens were greater than that of specimens using nails for jointing. However, the shear load factor, which is calculated based on some strength parameters and which forms the foundation of housing strength design, was slightly lower than that of the nail-jointed specimen. This was because there was a large decline in post-collapse resistance and a lower calculated absorbed energy caused by brittleness. The early detachment of panels was also revealed as a problem in the tests.