Living cationic polymerization of vinyl monomers by organoaluminum halides

Summary Well-defined living polymers of isobutyl vinyl ether were obtained in the polymerization initiated with ethylaluminum dichloride (EtAlCl₂) in conjunction with a stoichiometric excess of dioxane (5–10 vol%) in n-hexane at 0°C. Under these conditions, the number-average molecular weight of the polymers increased in direct proportion to monomer conversion, while the molecular weight distribution stayed narrow (M_w/M_n = 1.1–1.25). In sharp contrast, the EtAlCl₂-initiated polymerization in the absence of dioxane led to non-living polymers with a broad molecular weight distribution. It was concluded that the propagating carbocation is stabilized not by the counteranion but by an externally added basic compound (dioxane) that strongly interacts with the active end.     

Depolymerization of fluoroalkyl methacrylate polymers as studied with thermogravimetry

Thermal behaviors of a few kinds of poly(fluoroalkyl methacrylate) prepared by γ-or UV-ray polymerization were investigated by using thermogravimetric measurements with the intermittent analysis of the gaseous products. The degradation of fluoroalkyl methacrylate polymers, monomeric units of which were CH₂=C(CH₃)COOCH₂(CF₂CF₂)_nH, n = 1, 2, and 3, proceeded according to the depolymerization mechanism reproducing the pristine monomer exclusively, but the thermogram in inert atmosphere showed the features of a two-step reaction. Two species of polymer differing in the heat stability were supposed to exist in the polymeric substance produced by γ- or UV-ray irradiation, and the fraction of polymer having lower heat stability increased with the increasing length of the fluoroalkyl ester group. In air, however, the thermogram of poly(fluoroalkyl methacrylate) showed no such a stepwise weight decrease as was observed in inert atomsphere with the elevating temperature, and the temperatures at which the depolymerization was introduced shifted to a much higher region. The results were ascribed to the reaction of initiating polymer radicals produced on polymer having lower stability with oxygen to form hydroperoxide, which once stabilized the polymer radicals and obstructed the initiaition of the unzipping reaction till higher temperature.     

Depolymerization of poly(fluoroalkyl methacrylate-co-methyl methacrylate) as studied with thermogravimetry

Thermal behaviors of a few kinds of poly(fluoroalkyl methacrylate-co-methyl methacrylate) prepared by γ-ray copolymerization were investigated by using thermogravimetric measurements together with the intermittent analysis of the gaseous products. The thermal degradation of copolymers composed of one of fluoroalkyl methacrylates of the following structures: CH₂?C(CH₃)COOCH₂(CF₂CF₂)_nH, where n = 1,2, and 3, and methyl methacrylate proceeded according to the depolymerization mechanism reproducing the pristine component comonomers exclusively, but their thermograms in inert atmosphere showed the feature of a two-step reaction. In air, however, thermograms of copolymers did not show such a stepwise decrease in weight with the elevating temperature, and temperatures at which depolymerization was introduced shifted to a much higher region. The overall aspects of depolymerization of copolymers seemed to be much similar to that of fluoroalkyl methacrylate homopolymer previously reported, and the retardation of depolymerization by air was considered to be due mainly to the stabilization of once-formed polymer radicals by oxygen.     

An incentive game based evolutionary model for crowd sensing networks

Crowd sensing networks can be used for large scale sensing of the physical world or other information service by leveraging the available sensors on the phones. The collector hopes to collect as much as sensed data at relatively low cost. However, the sensing participants want to earn much money at low cost. This paper examines the evolutionary process among participants sensing networks and proposes an evolutionary game model to depict collaborative game phenomenon in the crowd sensing networks based on the principles of game theory in economics. A effectively incentive mechanism is established through corrected the penalty function of the game model accordance with the cooperation rates of the participant, and corrected the game times in accordance with it’s payoff. The collector controls the process of game by adjusting the price function. We find that the proposed incentive game based evolutionary model can help decision makers simulate evolutionary process under various scenarios. The crowd sensing networks structure significantly influence cooperation ratio and the total number of participant involved in the game, and the distribution of population with different game strategy. Through evolutionary game model, the manager can select an optimal price to facilitate the system reach equilibrium state quickly, and get the number of participants involved in the game. The incentive game based evolutionary model in crowd sensing networks provides valuable decision-making support to managers.     

Effects of core machining configuration on the debonding toughness of foam core sandwich panels

Core machining is often applied to improve the formativeness of foam core and the manufacturing effectiveness of sandwich panels. This paper investigates the effects of core machining configuration on the interfacial debonding toughness of foam core sandwich panels fabricated by vacuum-assisted resin transfer molding process. Several machining configurations are conducted to foam core, and skin–core debonding toughness of fabricated sandwich panels is evaluated using double-cantilever-beam tests. The sandwich panels with core cuts exhibited higher apparent fracture toughness than the panels without core cut, specifically in the case of perforated core. The relationship between core machining configuration and measured fracture toughness is discussed based on the experimental observations and the numerical analyses of energy release rates.     

A Hu moment invariant as a shape circularity measure

In this paper we propose a new circularity measure which defines the degree to which a shape differs from a perfect circle. The new measure is easy to compute and, being area based, is robust—e.g., with respect to noise or narrow intrusions. Also, it satisfies the following desirable properties:

•

it ranges over (0,1] and gives the measured circularity equal to 1 if and only if the measured shape is a circle;

•

it is invariant with respect to translations, rotations and scaling.

Compared with the most standard circularity measure, which considers the relation between the shape area and the shape perimeter, the new measure performs better in the case of shapes with boundary defects (which lead to a large increase in perimeter) and in the case of compound shapes. In contrast to the standard circularity measure, the new measure depends on the mutual position of the components inside a compound shape.Also, the new measure performs consistently in the case of shapes with very small (i.e., close to zero) measured circularity. It turns out that such a property enables the new measure to measure the linearity of shapes.In addition, we propose a generalisation of the new measure so that shape circularity can be computed while controlling the impact of the relative position of points inside the shape. An additional advantage of the generalised measure is that it can be used for detecting small irregularities in nearly circular shapes damaged by noise or during an extraction process in a particular image processing task.     

Fabrication of piezoelectric multilayer thin-film actuators

In this study, we fabricated multilayer ceramics (MLCs) composed of multilayered Pb(Zr,Ti)O₃ (PZT) piezoelectric thin films with internal electrodes and evaluated their dielectric and piezoelectric properties. The stack of PZT ferroelectric layers (550 nm) and SrRuO₃ (SRO, 80 nm) electrodes were alternatively deposited on Pt/Ti-coated silicon-on-insulator substrates by radio-frequency magnetron sputtering. The MLCs composed of one, three, and five PZT layers were fabricated by the alternate sputtering deposition of PZT ferroelectric layers and SRO electrodes through the movable shadow mask. The capacitances of MLCs were proportionally increased with the number of PZT layers, while their relative dielectric constants were almost same among the each MLC. The MLCs exhibited symmetric and saturated P–E hysteresis loops similar to the conventional PZT thin films. We estimated that the piezoelectric properties of MLCs by FEM simulation, and confirmed that the effective transverse piezoelectric coefficients (d _31,eff ) increased with the number of PZT layers. The piezoelectric coefficients calculated to be d _31,eff  = ?2964 pC/N at 25 PZT layers, which is much higher than those of conventional single-layer piezoelectric thin films.     

Mobile crowdsensing with mobile agents

We introduce mobile agents for mobile crowdsensing. Crowdsensing campaigns are designed through different roles that are implemented as mobile agents. The role-based tasks of mobile agents include collecting data, analyzing data and sharing data in the campaign. Mobile agents execute and control the campaign autonomously as a multi-agent system and migrate in the opportunistic network of participants’ devices. Mobile agents take into account the available resources in the devices and match participants’ privacy requirements to the campaign requirements. Sharing of task results in real-time facilitates cooperation towards the campaign goal while maintaining a selected global measure, such as energy efficiency. We discuss current challenges in crowdsensing and propose mobile agent based solutions for campaign execution and monitoring, addressing data collection and participant-related issues. We present a software framework for mobile agents-based crowdsensing that is seamlessly integrated into the Web. A set of simulations are conducted to compare mobile agent-based campaigns with existing crowdsensing approaches. We implemented and evaluated a small-scale real-world mobile agent based campaign for pedestrian flock detection. The simulation and evaluation results show that mobile agent based campaigns produce comparable results with less energy consumption when the number of agents is relatively small and enables in-network data processing with sharing of data and task results with insignificant overhead.