Handover and Uplink Power Control Performance in the 3.84 Mcps TDD mode of UTRA Network

In this article we consider the performance of the 3.84 Mcpstime-division duplex (TDD) mode of UTRA (Universal TerrestrialRadio Access) network. We emphasize two of the radio resourcemanagement algorithms, handover and uplink power control, whoserole in the overall system performance is studied extensively.First, a handover algorithm used in WCDMA (Wideband Code DivisionMultiple Access) standard is considered in a TDD-mode operation.This gives rise to a careful setting of different handoverparameters, and the evaluation of the effects to the systemperformance. Secondly, the specified uplink power controlalgorithm is considered. Since it is based on several user-mademeasurements which may involve both random and systematic errors acareful study about the suitability of the power control scheme iscarried out.     

Macroscopic and crystallographic density of solid-state extruded polyethylene

Summary The influence of draw ratio on macroscopic and crystallographic density of polyethylene with different initial morphologies, has been investigated by solid-state extrusion. An initial drop followed by an increase in macroscopic density as a function of draw ratio has been observed. Since precision X-ray measurements of unit cell parameters showed no variation of crystallographic density, it was concluded that plastic deformation of polyethylene upon drawing proceeds with a decrease of the degree of crystallinity. This was confirmed by differential scanning calorimetry.     

Clarification of a wheat straw‐derived medium with ion‐exchange resins for xylitol crystallization

BACKGROUND: Xylitol bioproduction from lignocellulosic residues comprises hydrolysis of the hemicellulose, detoxification of the hydrolysate, bioconversion of the xylose, and recovery of xylitol from the fermented hydrolysate. There are relatively few reports on xylitol recovery from fermented media. In the present study, ion‐exchange resins were used to clarify a fermented wheat straw hemicellulosic hydrolysate, which was then vacuum‐concentrated and submitted to cooling in the presence of ethanol for xylitol crystallization. RESULTS: Sequential adsorption into two anion‐exchange resins (A‐860S and A‐500PS) promoted considerable reductions in the content of soluble by‐products (up to 97.5%) and in medium coloration (99.5%). Vacuum concentration led to a dark‐colored viscous solution that inhibited xylitol crystallization. This inhibition could be overcome by mixing the concentrated medium with a commercial xylitol solution. Such a strategy led to xylitol crystals with up to 95.9% purity. The crystallization yield (43.5%) was close to that observed when using commercial xylitol solution (51.4%). CONCLUSION: The experimental data demonstrate the feasibility of using ion‐exchange resins followed by cooling in the presence of ethanol as a strategy to promote the fast recovery and purification of xylitol from hemicellulose‐derived fermentation media. Copyright © 2008 Society of Chemical Industry     

Study of the morphology and mechanical properties of polypropylene composites with silica or rice‐husk

The mechanical, morphological behavior and water absorption characteristics of polypropylene (PP) and silica, or PP and rice‐husk, composites have been studied. The silica used in this study as filler was a commercial type produced from soluble glass or rice husks. The compatibilizing effect of PP grafted with monomethyl itaconate (PP‐g‐MMI) and/or with vinyltriethoxysilane (PP‐g‐VTES) as polar monomers on the mechanical properties and water absorption was also investigated. In general, a high loading of the studied fillers in the polymer matrix increases the stiffness and the water absorption capacity. This effect is more noticeable in the tensile modulus of the PP/silica composite with PP‐g‐VTES as compatibilizer. However, the increase of the rice‐husk charge as a natural filler in the PP matrix decreases the stiffness, and in the presence of PP‐g‐MMI as compatibilizer in PP/rice‐husk, the tensile modulus and water absorption of the composite were improved. The better adhesion and phase continuity in the PP/silica and PP/rice‐husk composites with different compatibilizers was confirmed by the morphological study. Copyright © 2004 Society of Chemical Industry     

The in vivo metabolic pattern of low-grade brain gliomas: a positron emission tomographic study using 18F-fluorodeoxyglucose and 11C-L-methylmethionine

OBJECTIVE: The object of the present study was to identify metabolic differences between low-grade astrocytomas and oligodendrogliomas and to improve their diagnosis and noninvasive assessment, because both types of tumors look very similar from the point of view of clinical and radiological data (as assessed by computed tomography and magnetic resonance imaging). METHODS: Before any aggressive treatment, 22 patients with primary low-grade gliomas (astrocytomas in 12 patients and oligodendrogliomas in 10) were investigated with positron emission tomography for both glucose metabolism (18F-fluorodeoxyglucose) and amino acid uptake (11C-L-methylmethionine). An original software that allows a full metabolic analysis of the tumor region of interest (defined from the T1-weighted magnetic resonance image) and compares tumor tissue uptake tracer concentrations with average healthy tissue values has been implemented for data processing. Heterogeneity of each individual tumor has been taken into account and was expressed in histograms, which provided data about the mean and also extreme and intermediate values of tracer concentrations and the way these values are distributed among the full tumor mass. RESULTS: It has been shown that both tumor types exhibit a glucose hypometabolism (slightly more pronounced with astrocytomas), whereas they strongly differ in methionine uptake, which is high in all oligodendrogliomas and either decreased, normal, or moderately increased in astrocytomas. This latter metabolic difference between both tumor populations may be partially explained by their different cell densities. CONCLUSION: This study suggests that despite similar radiological and clinical presentations, these two kinds of low-grade gliomas are metabolically different and could therefore have specific responses to different therapies. Moreover, their in vivo metabolic follow-up with positron emission tomography should rely on different parameters, depending on their histological type; methionine uptake may be more relevant than glucose metabolism in the follow-up of oligodendrogliomas.     

Cytotoxicity versus antibacterial activity of some antiseptics in vitro

The relationship between endometriosis and infertility is observed frequently. Patients with both conditions require a conservative approach to their management. Since hormonal therapy is one of those approaches, we sought to compare the efficacy of Danazol and Gestrinone in 80 infertile patients (48 and 32, respectively). Therapy lasted 6 months in both treatment groups, and all patients studied had laboratory tests performed and were clinically evaluated and classified through laparoscopy before and after therapy. The improvement of symptoms and favorable follow-up were similar with both treatments. The reestablishment of menstrual patterns and fertility were also nearly alike in both groups. However, Gestrinone was associated with fewer secondary effects and is easier to administer than Danazol. We conclude that Gestrinone is a useful medication in the management of the infertile patient with endometriosis.     

In-Situ and Real-Time Investigation of Columnar-to-Equiaxed Transition in Metallic Alloy

In this article, we present a review of observations during Al-3.5 wt pct Ni alloy solidi.cation experiments performed at the European Synchrotron Radiation Facility (ESRF) in Grenoble. These experiments provide direct access to dynamical phenomena during columnar growth (initial transient and breakdown of a planar solid-liquid interface), and for the first time to the transition from columnar-to-equiaxed microstructure (nucleation ahead of a columnar front and blocking of a columnar front by an equiaxed microstructure) and fully equiaxed growth (propagation of an effective front). Based on these experimental observations, critical parameters such as columnar growth velocity variation during the transition or equiaxed-grain diameter are measured and discussed. This article is based on a presentation made in the symposium entitled “Solidi.cation Modeling and Microstructure Formation: In Honor of Prof. John Hunt,” which occurred March 13–15, 2006, during the TMS Spring Meeting in San Antonio, Texas, under the auspices of the TMS Materials Processing and Manufacturing Division, Solidification Committee.