DLL23XA双侧向测井仪的研制

以往双侧向测井仪动态范围小，测量精度低，为此开发了DLL23XA双侧向测井仪。该仪器主要单元采用厚膜电路，稳定性、一致性好；深、浅屏流源采用可变功率控制，提高了仪器的动态范围。仪器采用3506P例进行数据传输，可方便地配接各种地面系统。     

CMOS图像传感器在视频监控系统中的应用

介绍了CMOS图像传感器的工作原理、总体结构,并具体介绍了一种CMOS图像传感器MT9M001的内部结构、特点及应用.在此基础上给出了CMOS图像传感器MT9M001在视频监控系统中的具体应用实例.该设计在低成本的条件下具有图像质量好、图像分辨率高等显著特点,具有较宽的应用范围和较高的研究价值.     

Studies on purification and some properties of nisin from Lactococcus lactis subsp. lactis Al2

Protoporphyria is a genetic disorder in which patients may develop severe protoporphyrin-induced liver damage and require transplantation. Because unique problems occur in the perioperative period and because excess production of protoporphyrin by the bone marrow continues after liver transplantation, the efficacy of this procedure for protoporphyric liver disease is uncertain. We present follow-up of nine patients who underwent liver transplantation. Two patients died within 2 months of transplantation, one from complications of abdominal bleeding and the other from sepsis after bowel perforations. The remaining seven patients had follow-up at 14 months to 8 years after transplantation (mean, 3.8 years). Two of the seven had suffered skin burns from exposure to operating room lights, which healed without scarring. Three had axonal neuropathies in the postoperative period requiring prolonged mechanical ventilation, and motor defects persisted in two. Five patients had normal liver chemistries at follow-up (mean, 3.5 years), with liver biopsy results normal or showing mild portal triad abnormalities, but erythrocyte protoporphyrin levels remained significantly elevated (1,765 +/- 365 mcg/dL; normal, < 65). The other two patients, both of whom had rejection, cytomegalovirus infection, and biliary tract obstruction requiring endoscopic therapy, had a recurrence of protoporphyric liver disease as indicated by liver biopsy features. One died 5 years after transplantation from complications of the liver disease. The other was stable 3.3 years after transplantation and was being monitored for possible retransplantation. Thus, liver transplantation can be performed successfully in patients with protoporphyric liver disease, with intermediate survival rates comparable to the general transplant population. However, disease may recur in the graft, particularly if there are complications that cause cholestasis.     

Ranking with uncertain labels and its applications

The techniques for image analysis and classification generally consider the image sample labels fixed and without uncertainties. The rank regression problem studied in this paper is based on the training samples with uncertain labels, which often is the case for the manual estimated image labels. A core ranking model is designed first as the bilinear fusing of multiple candidate kernels. Then, the parameters for feature selection and kernel selection are learned simultaneously by maximum a posteriori for given samples and uncertain labels. The provable convergency Expectation Maximization (EM) method is used for inferring these parameters in an iterative manner. The effectiveness of the proposed algorithm is finally validated by the extensive experiments on age ranking task and human tracking task. The popular FG-NET and the large scale Yamaha aging database are used for the age estimation experiments, and our algorithm outperforms those state-of-the-art algorithms ever reported by other interrelated literatures significantly. The experiment result of human tracking task also validates its advantage over conventional linear regression algorithm. A short version of this paper appeared in ICME07.     

碳/环氧复合材料的冲击拉伸

该文研究了T300碳纤维单向增强的环氧复合材料,在应变率从10~(-3)/s到10~3/s范围内的冲击拉伸行为.通过对实验数据进行拟合,得出该范围内材料对应变率具有弱的敏感性,表现在破坏强度及破坏应变随应变率增加不显著变化,平均模量几乎不受应变率的影响.分析了试件的几何尺寸效应,讨论了应力波作用对破坏形态的影响以及实验中观察到的拔出现象.从应变率在10~2～10~3/s附近材料行为某些非确定性,指出在更宽范围内了解其性能的必要性.     

液压支架工作状态模糊识别系统研究

针对目前综采工作面液压支架压力监测系统只能监测综采工作面压力,不能对液压支架工作状态进行识别的问题,设计了一种液压支架工作状态模糊识别系统。该系统可对现有的综采工作面液压支架压力监测系统监测到的压力数据进行模糊识别,根据模糊识别输出值即可判断液压支架的5种工作状态,即降架、移架、升架、增阻、卸压保持;当液压支架处于增阻工作状态且增阻时间过长时,该系统可及时通知液压支架操作工增大液压支架压力,辅助实现顶煤破碎。测试结果验证了该系统的可行性。     

一种用于图形设备接口的笔画模型方法

视频监控的在屏交互过程中,需要快速地对交互控件、感兴趣区域、活动标记等图形和图像进行绘制,为避免画面的停滞感,要求图形设备接口能快速进行绘制.为此,提出了一种笔画模型方法.利用 DirectX的原始绘制能力,该方法将绘制任务转换成笔画对象,使视频系统在实时运行过程中,只需将已转换的笔画对象的绘制数据提交给 DirectX 进行渲染和显示即可,降低重复绘制时间,满足系统的快速绘制要求.基于笔画模型方法,开发了一种可快速绘制的图形设备接口.     

"三全育人"理念下高职学生职业素养培育路径研究

通过解析高职学生职业素养的构成要素,分析高职学生职业素养的现状问题,有针对性地探索基于"三全育人"理念的高职学生职业素养培育路径,创新高职学生职业素养的培育模式、工作机制和培养方案,从而推动高职学生职业素养的整体提升.     

基于移动互联的继电保护移动作业平台设计

文章利用移动互联技术,通过搭建"移动终端-主站"软硬件平台,将传统继电保护作业中涉及的文本编辑、业务流转、作业审核、安全监督、资料整理等作业环节进行数字化改造,通过开发作业文本管理模块、安措票管理模块、设备检修缺陷管理模块,实现移动作业终端与现场作业的无缝衔接.继电保护从业人员可通过主站联动方式,提升继电保护作业的工作效率和智能化水平.     

终轧温度和卷取温度对51CrV4热轧板组织性能的影响研究

利用光学显微镜、扫描电镜、Z150电子拉伸试验机分析了不同终轧温度、卷取温度下51CrV4热轧板的显微组织和力学性能。