Autothermal two-stage gasification of low-density waste-derived fuels

In order to increase the efficiency of waste utilization in thermal conversion processes, pre-treatment is advantageous. With the Herhof Stabilat^® process, residual domestic waste is upgraded to waste-derived fuel by means of biological drying and mechanical separation of inerts and metals. The dried and homogenized waste-derived Stabilat^® fuel has a relatively high calorific value and contains high volatile matter which makes it suitable for gasification. As a result of extensive mechanical treatment, the Stabilat^® produced is of a fluffy appearance with a low density. A two-stage gasifier, based on a parallel-arranged bubbling fluidized bed and a fixed bed reactor, has been developed to convert Stabilat^® into hydrogen-rich product gas. This paper focuses on the design and construction of the configured laboratory-scale gasifier and experience with its operation. The processing of low-density fluffy waste-derived fuel using small-scale equipment demands special technical solutions for the core components as well as for the peripheral equipment. These are discussed here. The operating results of Stabilat^® gasification are also presented.     

Transient base dynamics of bipolar transistors in high injection

The transient behavior of a bipolar transistor in high level injection is analyzed both through simulations and an analytic model based on the quasi-neutral base approximation. It is found that, unlike the situation for low injection, transient operation can be influenced by the base majority carrier mobility and by the characteristics of the extrinsic base. While the quasi-neutrality approximation frequently remains valid, cases are presented in which it fails. In these cases, the transient conditions cause at least some small region of the normally quasi-neutral base to develop a space charge. The reclaimable fraction of the stored base charge is determined and discussed     

Near-wall porosity characteristics of fixed beds packed with wood chips

Packed beds of fuel wood chips are commonly found in thermal conversion processes such as combustion or gasification. Wood chips in particular are mostly used as fuel for small-scale domestic heating boilers but also for commercial-scale combustion units. The characterization of spatial voidage distribution inside the wood chip beds is of great importance for flow and reactor modelling. This study focuses on the radial porosity variations of cylindrical beds of three different types of commercially available wood chips including chips classified as G30 size class. The conventional technique of consolidating packed beds with a resin was chosen as the experimental procedure. The radial voidage distribution in different cylindrical beds is determined by image analysis of sections of the solidified packings. Additionally, a packing of monosized spheres was investigated in order to assess the selected procedure in comparison with widely available literature data for spheres. The results are discussed and summarized in a mathematical expression correlating the radial voidage distribution depending on average wood chip size, packing core porosity and dimensionless distance from the tube wall.     

A generalized function projective synchronization scheme for uncertain chaotic systems subject to input nonlinearities

In this paper, a modified generalized function projective synchronization scheme for a class of master–slave chaotic systems subject to dynamic disturbances and input nonlinearities (dead-zone and sector nonlinearities) is investigated. This synchronization system can be seen as a generalization of many existing projective synchronization schemes (namely the function projective synchronization, the modified projective synchronization and so on), in the sense that the master system has a scaling function matrix and the slave system has a scaling factor matrix. To practically achieve this generalized function synchronization, an adaptive fuzzy variable-structure control system is designed. The fuzzy systems are used to appropriately approximate the uncertain nonlinear functions. A Lyapunov approach is employed to prove the boundedness of all signals of the closed-loop control system as well as the exponential convergence of the synchronization errors to an adjustable region. Simulations results are presented to illustrate the effectiveness of the proposed generalized function PS scheme.     

Multi‐scale Approach to Hydrological Classification Provides Insight to Flow Structure in Altered River System

Rivers are hierarchical systems exhibiting processes and patterns across spatial and temporal scales principally driven by changes in flow. Hydrological indices estimated with mean or median daily flow data (i.e. daily scale) may be insensitive to anthropogenic alteration that imparts sub‐daily variation to flow. Therefore, indices developed at multiple temporal resolutions may provide additional insight into the presence of flow patterns masked by traditional techniques. We characterized the flow regime along the longitudinal gradient of the Platte River, a large Great Plains USA river, using hydrological indices derived with mean daily and sub‐daily flow data and a combination of multivariate statistical techniques. Three unique flow units were evident using daily scale flow data, whereas six unique flow units were evident at the sub‐daily scale. Flow units at both scales were not static, but rather the presence and extent of flow units across the riverscape depended on climate, tributary inflows and human influence. Anthropogenic alteration including hydropeaking was evident at the sub‐daily scale but not at the daily scale. The full complement of flow structure within regulated rivers, therefore, may not be captured using mean or median daily discharge values alone. Inductive river classification studies may benefit from assessing hydrological indices at multiple scales, particularly when investigating river systems with anthropogenic modification such as hydropeaking. Copyright © 2016 John Wiley & Sons, Ltd.     

Individual and area socioeconomic inequalities in cause-specific unintentional injury mortality: 11-Year follow-up study of 2.7 million Canadians

This study investigated the association between individual and area socioeconomic status (SES) and leading causes of unintentional injury mortality in Canadian adults. Using the 1991–2001 Canadian Census Mortality Follow-up Study cohort (N = 2,735,152), Cox proportional hazard regression was used to calculate hazard ratios and 95% confidence intervals for all-cause unintentional injury, motor vehicle collision (MVC), fall, poisoning, suffocation, fire/burn, and drowning deaths. Results indicated that associations with SES differed by cause of injury, and were generally more pronounced for males. Low education was associated with an elevated risk of mortality from all-cause unintentional injury and MVC (males only) and poisoning and drowning (both sexes). Low income was strongly associated with most causes of injury mortality, particularly fire/burn and poisoning. Having no occupation or low occupational status was associated with higher risks of all-cause injury, fall, poisoning and suffocation (both sexes) and MVC deaths among men. Associations with area deprivation were weak, and only areas with high deprivation had elevated risk of all-cause injury, MVC (males only), poisoning and drowning (both sexes). This study reveals the importance of examining SES differentials by cause of death from a multilevel perspective. Future research is needed to clarify the mechanisms underlying these differences to implement equity-oriented approaches for reducing differential exposures, vulnerability or consequences of injury mortality.     

Micellization Behavior of Long-Chain Substituted Alkylguanidinium Surfactants

Surface activity and micelle formation of alkylguanidinium chlorides containing 10, 12, 14 and 16 carbon atoms in the hydrophobic tail were studied by combining conductivity and surface tension measurements with isothermal titration calorimetry. The purity of the resulting surfactants, their temperatures of Cr→LC and LC→I transitions, as well as their propensity of forming birefringent phases, were assessed based on the results of ¹H and ¹³C NMR, differential scanning calorimetry (DSC), and polarizing microscopy studies. Whenever possible, the resulting values of Krafft temperature (T_K), critical micelle concentration (CMC), minimum surface tension above the CMC, chloride counter-ion binding to the micelle, and the standard enthalpy of micelle formation per mole of surfactant (Δ_micH°) were compared to those characterizing alkyltrimethylammonium chlorides or bromides with the same tail lengths. The value of T_K ranged between 292 and 314 K and increased strongly with the increase in the chain length of the hydrophobic tail. Micellization was described as both entropy and enthalpy-driven. Based on the direct calorimetry measurements, the general trends in the CMC with the temperature, hydrophobic tail length, and NaCl addition were found to be similar to those of other types of cationic surfactants. The particularly exothermic character of micellization was ascribed to the hydrogen-binding capacity of the guanidinium head-group.     

Feasibility of the electrochemical way in molten fluorides for separating thorium and lanthanides and extracting lanthanides from the solvent

An alternative way of reprocessing nuclear fuel by hydrometallurgy could be using treatment with molten salts, particularly fluoride melts. Moreover, one of the six concepts chosen for GEN IV nuclear reactors (Technology Roadmap - http://gif.inel.gov/roadmap/) is the molten salt reactor (MSR). The originality of the concept is the use of molten salts as liquid fuel and coolant. During the running of the reactor, fission products, particularly lanthanides, accumulate in the melt and have to be eliminated to optimise reactor operation. This study concerns the feasibility of the separation actinides-lanthanides-solvent by selectively electrodepositing the elements to be separated on an inert (Mo, Ta) or a reactive (Ni) cathodic substrate in molten fluoride media. The main results of this work lead to the conclusions that:

•

The solvents to be used for efficient separation must be fluoride media containing lithium as cation.

•

Inert substrates are suitable for actinide/lanthanide separation; nickel substrate is more suitable for the extraction of lanthanides from the solvent, owing to the depolarisation occurring in the cathodic process through alloy formation.

     

Mutations in the EXT1 and EXT2 genes in hereditary multiple exostoses

In an in-vitro preparation of gastric mucosae of Rana pipiens, the effect of adding melittin to a concentration of 5x10-6 M in the secretory solution on the transepithelial potential difference (PD), resistance (R) and short-circuit current (Isc) was studied. In 20 min, melittin decreased the PD by 9.3 mV and R by 148 ohm cm2. These changes can be explained by a decrease in the resistance, RP, of the paracellular pathway. To determine whether specific-ion pathways were responsible for the decrease in R, the effect of melittin on the partial conductances of Cl-, K+ and Na+ was also studied using the ion substitution method. Melittin decreased the PD response to changes in nutrient Na+, K+ and Cl- and the PD response to changes in secretory Cl-, but did not affect PD responses to changes in secretory Na+ or K+. Therefore, melittin decreased the nutrient membrane partial conductances of Cl-, K+ and Na+ and secretory membrane partial conductance of Cl-, without affecting the secretory partial conductances of Na+ or K+. Initially, melittin increased Isc in regular and Cl--free but not in Na+-free solutions. There was a delayed decrease in Isc. The results indicate that melittin decreases RP, increases the Na+ conductance of the secretory membrane and inhibits, eventually, the Na+/K+-ATPase pump.