Hydrogen limitation--a method for controlling the performance of membrane biofilm reactor for autotrophic denitrification of wastewater.

Hydrogen-driven denitrification using the fiber membrane biofilm reactor (MBfR) was evaluated for consistent operation in tertiary wastewater treatment. The possibility of controlling the process rates, as well as biofilm parameters by supplying limited amounts of electron donor (hydrogen), was tested. Limiting the hydrogen supply proved to be efficient in controlling the biofilm growth and performance of the MBfR. Denitrification rates remained unchanged for both synthetic wastewater (SWW) and real municipal wastewater (MWW) effluent as well through the fluctuations in the substrate (NO3-N) concentration. The average denitrification rates were 0.50 (+/- 0.02) g NO3-N per day per m2 for SWW and 0.59 (+/- 0.04) g NO3-N per day per m2 for MWW. Biofilm density rather than thickness was the determining factor in substrate diffusion and biofilm sloughing, ultimately determining operating stability. Limited hydrogen supply assured constant volatile solids (VS) concentration in the biofilm. It was determined that VS/TS ratio higher than 0.25 assured stable biofilm operation. Decrease of VS/TS ratio below 0.25 led to shearing of the nonbiological outer layers of the biofilm. The values of chemical oxygen demand (COD), volatile suspended solids (VSS) and total suspended solids (TSS) in the final effluent were stable and well below wastewater effluent guidelines. Substitutions of bicarbonate with gaseous carbon dioxide as the carbon source did not affect denitrification rates despite lower than optimum pH conditions.     

Grain boundary embrittlement in Cu-AI-Niβ-phase alloys

The grain boundary embrittlement in Cu-AI-Ni-phase alloys has been investigated. The study included both the bulk alloys and rapidly solidified ribbons. It was observed that the fracture characteristics and the phase transformations in rapidly solidified ribbons were similar to those in the bulk alloys. Various factors responsible for intergranular fracture were considered. It was found that intrinsic or extrinsic precipitates at the grain boundaries are not responsible for the embrittlement. It was further observed that the segregation of impurities does not occur at the grain boundaries and hence is not a factor contributing to the embrittlement. The intrinsic characteristics, however, appear to play an important role. These may include high elastic anisotropy, ordered structure and plastic incompatibility. Severe embrittlement in high-nickel alloys is associated with spinodal decomposition occurring in these alloys. The large grain size exhibited by these alloys is found not to be a significant factor contributing to the embrittlement.     

Ricinoleic acid inPhyllanthus niruri seed oil

Seed oil ofPhyllanthus niruri (Euphorbiaceae) contains 1.2% ricinoleic (12-hydroxy-cis-9-octadecenoic) acid, previously unknown in the genusPhyllanthus. Identification is based on thin layer and gas liquid chromatography, infrared, nuclear magnetic resonance, and mass spectrometry analysis as well as chemical methods. Other major components of the oil are linoleic acid (21%) and linolenic acid (51.4%). Presented at the ISF/AOCS World Congress, April 1980, New York City.     

Abutilon indicum Seed Oil — Characterisation of HBr-Reactive Acids

The seed oil of Abutilon indicum (Malvaceae) contains three HBr-reactive fatty acids. These are shown to be cis-12,13-epoxyoleic (vernolic) acid, 1.6% 9,10-methylene-octadec-9-enoic (sterculic) acid, 0.9%; as well as 8,9-methylene-heptadec-8-enoic (malvalic) acid, 2.3%. Quantitative results are obtained by combining informations about the HBr-titration, the preparative thin layer separation of oxygenated and non-oxygenated acids, and gas liquid chromatographic analysis.     

Influence of nickel and molybdenum on the phase stability and mechanical properties of maraging steels

The effect of nickel and molybdenum concentrations on the phase transformation and mechanical properties of conventional 18Ni(350) maraging steel has been investigated. Both of these elements act as strong austenite stabilizers. When the concentration of molybdenum or nickel is greater than 7.5 or 24 wt %, respectively, the austenite phase remains stable up to room temperature. In both molybdenum- and nickel-alloyed steels, the austenite phase could be transformed to martensite by either dipping the material in liquid nitrogen or subjecting it to cold working. When 7.5 wt% Mo and 24 wt% Ni were added in combination, however, the austenite phase obtained at room temperature did not transform to martensite when liquid-nitrogen quenched or even when cold rolled to greater than 95% reduction. The aging response of these materials has also been investigated using optical, scanning electron, and scanning transmission electron microscopy.     

Switched reluctance motor modeling with on-line parameteridentification

A nonlinear model with on-line parameter estimation using recursive identification for switched reluctance motors (SRMs) is presented. The model is robust toward parameter variations in the motor or any system disturbances. The parameters of the model are adjusted to account for errors in rotor position, which allows the use of crude inexpensive position sensors. The proposed modeling approach allows self-tuning of SRMs in a production unit. The simulations and experiments performed to test the model demonstrate the accuracy of estimation of the model     

Decoding Speech Prosody: Do Music Lessons Help?

Three experiments revealed that music lessons promote sensitivity to emotions conveyed by speech prosody. After hearing semantically neutral utterances spoken with emotional (i.e., happy, sad, fearful, or angry) prosody, or tone sequences that mimicked the utterances' prosody, participants identified the emotion conveyed. In Experiment 1 (n=20), musically trained adults performed better than untrained adults. In Experiment 2 (n=56), musically trained adults outperformed untrained adults at identifying sadness, fear, or neutral emotion. In Experiment 3 (n=43), 6-year-olds were tested after being randomly assigned to 1 year of keyboard, vocal, drama, or no lessons. The keyboard group performed equivalently to the drama group and better than the no-lessons group at identifying anger or fear. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Vibration of antisymmetric angle-ply composite annular plates of variable thickness

Journal of Mechanical Science and Technology - Based on first order shear deformation theory, free vibrational behaviour of antisymmetric angle-ply composite annular plate is investigated. The...     

Investigation of structural,optical, electrical,and magnetic properties of Fe-doped La0.7Sr0.3MnO3 manganites

In this work, the physical properties of nanocrystalline samples of La_0.7Sr_0.3Mn_1−xFe_xO₃ (0.0 ≤ x ≤ 0.20) perovskite manganites synthesized by the reverse micelle (RM) technique were explored in detail. The phase purity, crystal structure, and crystallite size of the samples were determined using X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. All the samples had rhombohedral crystal structure and crystallite size increased with increase in Fe content in La_0.7Sr_0.3MnO₃. The scanning electron micrographs (SEMs) exhibited smooth surface morphology and nonuniform shape of the particles. The optical properties studied using UV-visible absorption spectroscopy revealed a decrease in the absorbance and optical band gap with an increase in Fe content in La_0.7Sr_0.3MnO₃ compound. The temperature-dependent resistivity measurements revealed semiconducting nature of x = 0 and 0.1 samples up to the studied temperature range, while a metal-to-insulator transition was observed at higher Fe doping. Magnetic studies revealed weak ferromagnetism in all the samples and a reduction in the maximum magnetization with an increase in Fe content. A close correlation between electrical transport and magnetic properties was observed with the doping of Fe ion in La_0.7Sr_0.3MnO₃ at Mn site. These results advocate strong interactions associated with the double exchange mechanism among Fe³⁺ and Mn³⁺ ions.