Processing of an East Mediterranean phosphate ore sample by an integrated attrition scrubbing/classification scheme (part one)

ABSTRACT

In this study, an Egyptian siliceous/calcareous sedimentary phosphorite was subjected to beneficiation by unsophisticated economic means. The mineralogical and chemical examination showed that the ore sample is a typical example for the East Mediterranean phosphorites with 21.80% P₂O₅, 10.93% acid insoluble and 16.61% loss on ignition. The primary crushed sample was classified into three size fractions without any milling and they were separately subjected to an integrated attrition scrubbing study. Screening and classification on the 2.30 mm and 0.071 mm sieves were sequentially introduced with the attrition process. The effect of solid%, attrition speed and time were studied and optimized for each size fraction. Results showed that three products were produced and could be categorized according to their P₂O₅ content into the coarse tailing (+2.30 mm), the attrition concentrate (?2.30 + 0.071 mm) and the phosphate fines (?0.071 mm). The P₂O₅ contents of these products reached 12.24%, 28.72% and 18.77%, with P₂O₅ distribution reached 6.74%, 51.75% and 41.51%, respectively. A global P₂O₅ of 28.72% was obtained with a recovery of about 52%. A tentative flow-sheet for the whole process was postulated.     

An interdisciplinary heuristic evaluation method for universal building design

This study highlights how heuristic evaluation as a usability evaluation method can feed into current building design practice to conform to universal design principles. It provides a definition of universal usability that is applicable to an architectural design context. It takes the seven universal design principles as a set of heuristics and applies an iterative sequence of heuristic evaluation in a shopping mall, aiming to achieve a cost-effective evaluation process. The evaluation was composed of three consecutive sessions. First, five evaluators from different professions were interviewed regarding the construction drawings in terms of universal design principles. Then, each evaluator was asked to perform the predefined task scenarios. In subsequent interviews, the evaluators were asked to re-analyze the construction drawings. The results showed that heuristic evaluation could successfully integrate universal usability into current building design practice in two ways: (i) it promoted an iterative evaluation process combined with multi-sessions rather than relying on one evaluator and on one evaluation session to find the maximum number of usability problems, and (ii) it highlighted the necessity of an interdisciplinary ad hoc committee regarding the heuristic abilities of each profession. A multi-session and interdisciplinary heuristic evaluation method can save both the project budget and the required time, while ensuring a reduced error rate for the universal usage of the built environments.     

Creating a reference data set for the summarization of discussion forum threads

In this paper we address extractive summarization of long threads in online discussion fora. We present an elaborate user evaluation study to determine human preferences in forum summarization and to create a reference data set. We showed long threads to ten different raters and asked them to create a summary by selecting the posts that they considered to be the most important for the thread. We study the agreement between human raters on the summarization task, and we show how multiple reference summaries can be combined to develop a successful model for automatic summarization. We found that although the inter-rater agreement for the summarization task was slight to fair, the automatic summarizer obtained reasonable results in terms of precision, recall, and ROUGE. Moreover, when human raters were asked to choose between the summary created by another human and the summary created by our model in a blind side-by-side comparison, they judged the model’s summary equal to or better than the human summary in over half of the cases. This shows that even for a summarization task with low inter-rater agreement, a model can be trained that generates sensible summaries. In addition, we investigated the potential for personalized summarization. However, the results for the three raters involved in this experiment were inconclusive. We release the reference summaries as a publicly available dataset.     

Do ozone and boric acid affect microleakage in class V composite restorations?

The aim of this in vitro study was to evaluate the effects of chlorhexidine gluconate (2%), sodium hypochloride (2.5%), ozone gas, and boric acid at different concentrations (1%, 3%, 5%, and 7%) on microleakage from composite restorations.

In a total of 80 extracted human canine teeth, a class V cavity was opened on the buccal surface and the samples were separated into eight groups. In the control group, no procedure was applied for cavity disinfection, then composite restoration (Z250, 3M) was made using single-stage, self-etch adhesive (Single Bond 3M). In the other groups, seven different disinfectants were used, then the cavity was restored. The teeth were split into two in the buccolingual direction, parallel to the long axes. Stain penetration was examined under stereomicroscope and scored. Examination with SEM was made on one sample from each group, selected at random. Statistical evaluations were made using Dunnett C Post Hoc Comparison and Kruskal–Wallis H tests.

In the occlusal region evaluation, the groups with the lowest level of leakage were the 3% and 5% boric acid groups, and the highest levels of microleakage were determined in the chlorhexidine group and the 1% boric acid group. In the gingival region, the lowest level of microleakage was in the 5% boric acid group and the highest levels were determined in the 1% and 7% boric acid groups.

Boric acid disinfectants used at suitable concentrations were not seen to create a risk in respect of microleakage.     

Optimizing PSMA Radioligand Therapy for Patients with Metastatic Castration-Resistant Prostate Cancer. A Systematic Review and Meta-Analysis

The aim of the review was to evaluate patient and treatment characteristics for patients with metastatic castration-resistant prostate cancer (mCRPC) treated with PSMA radioligand therapy (PRLT) associated with above-average outcome. The systematic review and meta-analysis followed recommendations by the Preferred Reporting Items for Systematic reviews and Meta-Analysis (PRISMA). We searched for publications in PubMed, Embase, and ClinicalTrials.gov up to 31 September 2020. Thirty-six publications and four duplicates reported 2346 patients. Nearly two-thirds of the patients had bone metastases. Median overall survival (OS) was 16 months. Asymptomatic patients and patients with only lymph node metastases lived longer than symptomatic patients and patients with more extensive metastases. Patients treated with an intensified schedule of ¹⁷⁷Lu PRLT lived longer than those treated with a conventional schedule. Half of the patients obtained a PSA decline ≥ 50% and these patients lived longer than those with less PSA decline. Approximately 10% of the patients developed hematologic toxicity with anemia grade 3 as the most severe adverse effect. Characteristics for patients, cancer, restaging, and PRLT predict above average overall survival following treatment with PRLT.     

Distributed channel selection in CRAHNs: A non-selfish scheme for mitigating spectrum fragmentation

In this paper, we consider the problem of spectrum sharing in CRAHNs and propose a distributed channel selection scheme. The key functionality of our proposal, best-fit channel selection (BFC) is that it accounts both the primary channel traffic activity and CR traffic activity in channel selection. We assume CR nodes have the capability of estimating the primary channel traffic activities. In BFC, each CR selects a channel among the primary user (PU) channels for transmission that best fits to its transmission time requirement. We compare the performance of BFC to the widely known longest idle time channel selection (LITC) scheme. In LITC, a CR selects the channel that has the longest expected idle time independent of its transmission needs. In a multi-user CRN, this may degrade the network performance compared to the non-selfish BFC approach. LITC is considered selfish since each CR aims to maximize its own benefit and thus wastes resources that may be utilized by other nodes in the network. BFC providing an efficient spectrum sharing mechanism implicitly mitigates the effect of spectrum fragmentation which is a significant issue degrading the CR spectrum utilization. In CRNs, spectrum may be fragmented in various dimensions, e.g. time and frequency, such that some parts of the spectrum can not be used although being idle. Our proposal provides a solution to the spectrum fragmentation issue in time dimension at the medium access control (MAC) layer. By a set of simulations, we highlight the performance improvement by BFC over the conventional LITC under various CR/PU traffic, number of CRs, estimation accuracy and buffering capability. Simulation results show that the performance of the proposed BFC is significantly superior to that of LITC in terms of probability of successful transmission, spectrum opportunity utilization and fragmentation.     

Phase behavior,density, and crystallization of polyethylene in n‐pentane and in n‐pentane/CO2 at high pressures

The phase behavior and volumetric properties of polyethylene (PE) in solutions of n‐pentane and n‐pentane/CO₂ were studied in a temperature (T) range of 370–440 K at pressures up to 60 MPa. Measurements were conducted with a variable‐volume view‐cell system equipped with optical sensors to monitor the changes in the transmitted light intensity as the P or the T of the system was changed. Lower‐critical‐solution‐temperature‐type behavior was observed for all of the liquid–liquid (L–L) phase boundaries, which shifted to higher pressures in solutions containing CO₂. The solid–fluid (S–F) phase boundaries were investigated over a P range of 8–54 MPa and took place in a narrow T range, from 374 to 378 K in this P interval. The S–F phase boundary showed a unique feature in that the demixing temperatures showed both increasing and decreasing trends with P depending on the P range. This was observed in both the PE/n‐pentane and PE/n‐pentane/CO₂ mixtures. The density of these solutions were measured as a function of P at selected temperatures or as a function of T at selected pressures that corresponded to the paths followed in approaching the phase boundaries (S–F or L–L) starting from a homogeneous one‐phase condition. The data showed a smooth variation of the overall mixture density along these paths. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2201–2209, 2003     

Bilaterally Microstructured Thin Polydimethylsiloxane Film Production

Thin PDMS films with complex microstructures are used in the manufacturing of dielectric electro active polymer (DEAP) actuators, sensors and generators, to protect the metal electrode from large strains and to assure controlled actuation. The current manufacturing process at Danfoss Polypower A/S produces films with a one-sided microstructured surface only. It would be advantageous to produce a film with both surfaces microstructured, as this increases the film’s performance efficiency. The new technique introduced herein produces bilaterally microstructured film by combining an embossing method with the existing manufacturing process. In employing the new technique, films with microstructures on both surfaces are successfully made with two different liquid silicone rubber (LSR) formulations: 1) pure XLR630 and 2) XLR630 with titanium dioxide (TiO₂). The LSR films (～70 µm) are cast on a carrier web substrate using a coating blade. The carrier web, which has a sinusoidal corrugation with wave height of 7 µm and a wave period of 7 µm on its surface, imparts corrugations to the bottom surface of the film. The elastomer film on the carrier web is preheated to the gel point, where the elastomer film can retain an imprint made on it. The preheated film at gel point is embossed between the rolls of a gravure lab coater, which corrugates the top surface of the film. The films are then heated, in order to cure completely. For the LSR systems used in this process, the optimum conditions for preheating are 110°C for 4–7 s, while for embossing the temperature is 110°C with 25 psi pressure between the rolls at a speed of 1.4 rpm. Scanning electron microscope (SEM) images confirm the formation of microstructures on both the surfaces of the film.     

Gold recovery from dilute gold solutions using DEAE-cellulose

The present work investigates gold recovery using DEAE-cellulose, a common biopolymer derivative, from synthetically prepared diluted gold-bearing solutions of 50 ppm. The effects of different recovery parameters on gold recovery efficiency were studied in detail. It was demonstrated that gold recovery efficiency increased with an increasing amount of sorbent, as well as increasing contact time. A gold recovery efficiency of 99% was attained under conditions of 20–40 g DEAE-cellulose per liter at a shaking rate of 130 rpm for 30 min at room temperature. On the other hand, with smaller amounts of sorbent (6 g/l), it was also possible to recover gold from the solution with 99% efficiency when the reaction temperature was increased to 60 °C. The shaking rate and temperature were demonstrated to play a vital role in the recovery process. It was also found that gold recovery by DEAE-cellulose is an intermediate-controlled process with an activation energy of 37.11 kJ/mol. The XRD pattern and SEM images revealed that the recovered gold was in the metallic form.     

Poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) based tissue engineering matrices

In this study, the aim was to produce tissue-engineered bone using osteoblasts and a novel matrix material, poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) (PHBV). In order to prepare a porous PHBV matrix with uniform pore size, sucrose crystals were loaded in the foam and then leached leaving pores behind. The surface of the PHBV matrix was treated with rf-oxygen plasma to increase the surface hydrophilicity. SEM examination of the PHBV matrices was carried out. Stability of PHBV foams in aqueous media was studied. The pH decrease is an indication of the degradation extent. The weight and density were unchanged for a period of 120 days but then a significant decrease was observed for the rest of the study. Osteoblast cells were then isolated from rat bone marrow and seeded onto PHBV matrices. The metabolization and proliferation on the foams was determined with MTS assay which showed that osteoblasts proliferated on PHBV. It was also found that cells proliferated better on large pore size foams (300–500 m) than on the small pore size foams (75–300 m). Production of ALP was measured spectrophotometrically. The present study demonstrated that PHBV matrices are suitable substrates for osteoblast proliferation and differentiation.