Fear Appeals,Message Processing Cues,and Credibility in the Websites of Violent,Ideological, and Nonideological Groups

Ideological groups use the Internet to deliver their messages unhindered by the constraints of traditional media. We examined how ideological groups promote their worldview through their websites. Using the elaboration likelihood model (ELM), this research used trained coders to examine the websites of nonideological groups (n = 37), nonviolent ideological groups (n = 36), and violent ideological groups (n = 32) for credibility, persuasion processing cues, and interactivity factors. Results of this study found that the websites of violent ideological groups use more fear appeals, were less interactive, and were the least credible of the 3 groups. All 3 groups used more central cues than peripheral suggesting they focused on evidence for their arguments rather than emotion.     

A general framework for efficient geographic routing in wireless networks

We propose a new link metric called normalized advance (NADV) for geographic routing in multihop wireless networks. NADV selects neighbors with the optimal trade-off between proximity and link cost. Coupled with the local next hop decision in geographic routing, NADV enables an adaptive and efficient cost-aware routing strategy. Depending on the objective or message priority, applications can use the NADV framework to minimize various types of link cost.We present efficient methods for link cost estimation and perform detailed experiments in simulated environments. Our results show that NADV outperforms current schemes in many aspects: for example, in high noise environments with frequent packet losses, the use of NADV leads to 81% higher delivery ratio. When compared to centralized routing under certain settings, geographic routing using NADV finds paths whose cost is close to the optimum. We also conducted experiments in Emulab testbed and the results demonstrate that our proposed approach performs well in practice.     

Sensitivity of vegetation indices to atmospheric aerosols: continental-scale observations in Northern Asia

Satellite observations play an important role in characterization of the interannual variation of vegetation. Here, we report anomalies of two vegetation indices for Northern Asia (40°N-75°N, and 45°E-179°E), using images from the SPOT-4 VEGETATION (VGT) sensor over the period of April 1, 1998 to November 20, 2001. The Normalized Difference Vegetation Index (NDVI) and Enhanced Vegetation Index (EVI), which are correlated to a number of vegetation properties (e.g., net primary production, leaf area index), were compared. The results show that there is a large disagreement between NDVI and EVI anomalies in 1998 and 1999 for Northern Asia. The NDVI anomaly in 1998 was largely affected by atmospheric contamination, predominantly aerosols from extensive forest fires in that year. The EVI anomaly in 1998 was less sensitive to residual atmospheric contamination, as it is designed to be, and thus EVI is a useful alternative vegetation index for the large-scale study of vegetation. The EVI anomaly also suggests that potential vegetation productivity in Northern Asia was highest in 1998 but declined substantially in 2001, consistent with precipitation data from 1998-2001.     

The influence of cure conditions on the morphology and phase distribution in a rubber-modified epoxy resin using scanning electron microscopy and atomic force microscopy

In this paper, we consider the effect of cure conditions on the morphology and distribution of the rubber in a phase separated rubber-modified epoxy resin, which in effect is a two phase composite. Novel aspects of this study were measuring the elastic modulus of the dispersed rubber phase particles by atomic force microscopy (AFM) and verifying the presence of nano-dispersed rubber.The purpose of introducing dispersed rubber particles into the primary phase in these systems is to enhance their toughness. It is known that both the rubber particle size and volume fraction affect the degree to which the epoxy is toughened. It is not known, however, how the specific mechanical properties of the rubber phase itself affect the toughness.The objectives of this study were to: (1) use scanning electron microscopy (SEM) and atomic force microscopy (AFM) to determine the morphology and phase distribution of the rubber particles and (2) to measure the mechanical properties of the rubber particles using AFM. Ultimately, we would like to develop a clear understanding of how the changes in morphology and mechanical properties measured at the micro and nano-scales affect both the elastic modulus and fracture toughness of rubber-modified epoxy polymers.The epoxy system consisted of a diglycidyl ether of bisphenol-A, Epon 828, cured with piperidine and incorporating a liquid carboxyl-terminated acrlonitrile-butadiene rubber (CTBN). The carboxyl groups of the rubber are capable of reacting with the epoxy. The cure conditions considered were based on a statistically designed full factorial curing matrix, with the variables selected being cure temperature, initiator (piperidine) concentration, and rubber acrylonitrile concentration.Each of these primary variables was found to affect the phase distribution that resulted during cure. A statistical analysis of the effect of these variables on the phase morphology showed that the acrylonitrile content (%) of the rubber affected both the rubber particle size and volume fraction. The cure temperature strongly influenced the rubber particle volume fraction and modulus. Volume fractions of the rubber phase of up to 24% were obtained even though the amount of rubber added was only 12.5%. The rubber particle modulus varied from 6.20 to 7.16 MPa. Both the volume fraction and modulus of the rubber particles were found to influence the macroscopic mechanical properties of the composite. While larger volume fractions favor improved toughness, we note that that the toughness is greatest when the particle modulus values do not exceed ∼6.2 MPa. Thus, increased volume fraction by itself may not always result in increased toughness. The particles also must be sufficiently ‘soft’ in order to improve toughness. In the system of interest here, the processing conditions are a key factor in achieving the most appropriate material properties. By inference, this is likely to be the case as well in other rubber-modified thermosets.     

Spatiotemporal aspects of real-time PM(2.5): low- and middle-income neighborhoods in Bangalore, India

We measured outdoor fine particulate matter (PM(2.5)) concentrations in a low- and a nearby middle-income neighborhood in Bangalore, India. Each neighborhood included sampling locations near and not near a major road. One-minute average concentrations were recorded for 168 days during September 2008 to May 2009 using a gravimetric-corrected nephelometer. We also measured wind speed and direction, and PM(2.5) concentration as a function of distance from road. Average concentrations are 21-46% higher in the low- than in the middle-income neighborhood, and exhibit differing spatiotemporal patterns. For example, in the middle-income neighborhood, median concentrations are higher near-road than not near-road (56 versus 50 μg m(-3)); in the low-income neighborhood, the reverse holds (68 μg m(-3) near-road, 74 μg m(-3) not near-road), likely because of within-neighborhood residential emissions (e.g., cooking; trash combustion). A moving-average subtraction method used to infer local- versus urban-scale emissions confirms that local emissions are greater in the low-income neighborhood than in the middle-income neighborhood; however, relative contributions from local sources vary by time-of-day. Real-time relative humidity correction factors are important for accurately interpreting real-time nephelometer data.     

Application of the Theory of Critical Distances to predict the effect of induced and process inherent defects for SLM Ti-6Al-4V in high cycle fatigue

Additive manufacturing techniques such as selective laser melting enable the production of customised components with high geometrical freedom. However, SLM results in a material condition with different properties to their conventionally manufactured counterparts. The presence of process-inherent defects can significantly impact the degradation of part performance. Hereby, a novel approach to assessing notched SLM Ti-6Al-4V material via a critical distance theory is presented. Geometrical notches of varying size are evaluated. Results show that the Theory of Critical Distances is appropriately applicable to fatigue prediction of SLM Ti-6Al-4V in its as-built state.     

An energy‐efficient utility‐based distributed data routing scheme for heterogenous sensor networks

A utility‐based distributed data routing algorithm is proposed and evaluated for heterogeneous wireless sensor networks. It is energy efficient and is based on a game‐theoretic heuristic load‐balancing approach. It runs on a hierarchical graph arranged as a tree with parents and children. Sensor nodes are considered heterogeneous in terms of their generated traffic, residual energy and data transmission rate and the bandwidth they provide to their children for communication. The proposed method generates a data routing tree in which child nodes are joined to parent nodes in an energy‐efficient way. The principles of the Stackelberg game, in which parents as leaders and children as followers, are used to support the distributive nature of sensor networks. In this context, parents behave cooperatively and help other parents to adjust their loads, while children act selfishly. Simulation results indicate the proposed method can produce on average more load‐balanced trees, resulting in over 30% longer network lifetime compared with the cumulative algorithm proposed in the literature. Copyright © 2014 John Wiley & Sons, Ltd.     

An inverted fabrication method towards a flexible dye sensitized solar cell based on a free-standing TiO2 nanowires membrane

This paper reports an inverted fabrication process for the photoanode of a flexible dye sensitized solar cell (DSSC). This procedure involves assembling a free-standing TiO₂ nanowires/nanoparticles hybrid membrane, via high temperature annealing, sputtering an indium tin oxide (ITO) layer onto this membrane, and transferring these onto a polydimethylsiloxane (PDMS) substrate. The inverted procedure prevents thermal decomposition of polymer substrate, whilst enabling effective thermal treatment of the functionalized titanium oxide. The flexible DSSC fabricated in this way has an efficiency of 2.7%, which is comparable with rigid device constructed using similar materials.