Photocatalytic degradation of methyl tert‐butyl ether (MTBE) in contaminated water by ZnO nanoparticles

BACKGROUND: Over the past several decades methyl tert‐butyl ether (MTBE) as additive to gasoline, intended to either boost ratings of fuel or to reduce air pollution, has been accepted worldwide. Since MTBE has high water solubility, the occurrence of fuel spills or leaks from underground storage tanks or transferring pipeline has led to the contamination of natural waters. In this study the degradation of aqueous MTBE at relatively high concentrations was investigated by a UV‐visible/ZnO/H₂O₂ photocatalytic process. The effects of important operational parameters such as pH, amount of H₂O₂, catalyst loading and irradiation time were also investigated. Concentration of MTBE and intermediates such as tert‐butyl formate and tert‐butyl alcohol were measured. RESULTS: Time required for complete degradation increased from 20 to 150 min when the initial concentration was increased from 10 to 500 mg L^?1. The first‐order rate constants for degradation of MTBE were estimated to be 0.183–0.022 min^?1 as the concentration increased from 10 to 500 mg L^?1. Study of the overall mineralization monitored by total organic carbon analysis showed that at an initial concentration of 100 mg L^?1 MTBE complete mineralization was obtained after 100 min under UV‐visible/ZnO/H₂O₂ photocatalysis. CONCLUSION: The data presented in this paper clearly indicated that UV‐visible/ZnO/O₂ as an advanced oxidation process provides an efficient treatment alternative for the remediation of MTBE‐contaminated waters. Copyright © 2008 Society of Chemical Industry     

A novel MEMS tunable antenna with wide tuning range of frequency

In this paper a novel MEMS tunable CPW antenna with wide tuning range of frequency is presented. The antenna’s frequency tuning range increment is achieved by loading three novel large tuning range capacitors at radiation edge of antenna patch. Two techniques are employed for increasing the capacitors tuning range. First, dual gap technique is used to overcome the pull-in limitation and then two lateral beams are added in order to parallel movement of capacitive plate which increases the capacitance value. The simulation result shows that the resonance frequency tuning range of antenna increased from 1.96 GHz loaded by traditional capacitor to 6.89 GHz using the new capacitor structure. Also in resonance frequency, the antenna has a good impedance matching with transmission line even in high capacitance values.     

Slotted capacitive microphone with sputtered aluminum diaphragm and photoresist sacrificial layer

In this paper, we have fabricated a new microphone using aluminum (Al) slotted perforated diaphragm and back plate electrode, and photoresist (AZ1500) sacrificial layer on silicon wafer. The novelty of this method relies on aluminum diaphragm includes some slots to reduce the effect of residual stress and stiffness of diaphragm for increasing the microphone sensitivity. The acoustic holes are made on diaphragm to reduce the air damping, and avoid the disadvantages of non standard silicon processing for making back chamber and holes in back plate, which are more complex and expensive. Photoresist sacrificial layer is easy to deposition by spin coater and also easy to release by acetone. Moreover, acetone has a high selectivity to resist compared to silicon oxide and Al, thus it completely removes sacrificial resist without incurring significant damage silicon oxide and Al. The measured zero bias capacitance is 17.5 pF, and its pull-in voltage is 25 V. The microphone has been tested with external amplifier and speaker, the external amplifier was able to detect the sound waves from microphone on speaker and oscilloscope. The maximum amplitude of output speech signal of amplifier is 45 mV, and the maximum output of MEMS microphone is 1.125 μV.     

Fuzzy Bayesian system reliability assessment based on Pascal distribution

The main purpose of this paper is to provide a methodology for discussing the fuzzy. Bayesian system reliability from the fuzzy component reliabilities, actually we discuss on the Fuzzy Bayesian system reliability assessment based on Pascal distribution, because the data sometimes cannot be measured and recorded precisely. In order to apply the Bayesian approach, the fuzzy parameters are assumed as fuzzy random variables with fuzzy prior distributions. The (conventional) Bayes estimation method will be used to create the fuzzy Bayes point estimator of system reliability by invoking the well-known theorem called ‘Resolution Identity’ in fuzzy sets theory. On the other hand, we also provide the computational procedures to evaluate the membership degree of any given Bayes point estimate of system reliability. In order to achieve this purpose, we transform the original problem into a nonlinear programming problem. This nonlinear programming problem is then divided into four sub-problems for the purpose of simplifying computation. Finally, the sub problems can be solved by using any commercial optimizers, e.g. GAMS or LINGO.     

A Scalable Interconnection Network Architecture for Petaflops Computing

Extrapolating technology advances in the near future, a computer architecture capable of petaflops performance will likely be based on a collection of processing nodes interconnected by a high-performance network. One possible organization would consist of thousands of inexpensive, low-power symmetric multiprocessor (SMP) nodes. Each node will inject data into the interconnection network at a very large rate and consequently, the interconnect scheme is one of the most crucial design issues affecting system performance. This paper describes the 2D simultaneous optical multiprocessor exchange bus (2D SOME-Bus) which has the potential to become the basis of a high-end computer architecture capable of petaflops performance. It consists of N horizontal, N vertical 1D SOME-Bus networks, and N ² nodes. Each node is connected to one horizontal and one vertical 1D SOME-Bus. Each of N nodes connected to one 1D SOME-Bus has a dedicated broadcast channel and an input channel interface based on an array of N receivers monitoring all N channels and allowing multiple simultaneous broadcasts. In the 2D SOME-Bus, messages being broadcast on one Bus can be broadcast in a cut-through manner on one or more Buses in the other dimension. This paper describes the optoelectronic devices and technology which make the 2D SOME-Bus possible, and the network interface organization. It also presents simulation results which compare the performance of the 2D SOME-Bus, the 1D SOME-Bus, the crossbar and the torus under the message-passing paradigm.     

Performance Comparison of Four Fiber-Reinforced Polymer Deck Panels

In an effort to assess the constructability and performance of bridges with fiber-reinforced polymer (FRP) composite decks, the short-term and long-term responses of a 207 m, five-span bridge retrofitted with four different FRP panel systems were monitored. The overall aspects of the panel systems, connection details, and construction techniques are presented prior to presentation of the observed and measured responses. Key design parameters (impact factors, girder distribution factors, and level of composite action) for FRP and reinforced concrete decks are evaluated. This paper demonstrates that FRP replacement decks are a viable alternative to reinforced concrete decks and identifies the differences in performances of various FRP deck systems. Two of the FRP panel systems were found to perform considerably better than the other deck systems. Issues that may reduce the service life of FRP deck systems are presented and discussed.