Word length and lexical activation: Longer is better.

Many models of spoken word recognition posit the existence of lexical and sublexical representations, with excitatory and inhibitory mechanisms used to affect the activation levels of such representations. Bottom-up evidence provides excitatory input, and inhibition from phonetically similar representations leads to lexical competition. In such a system, long words should produce stronger lexical activation than short words, for 2 reasons: Long words provide more bottom-up evidence than short words, and short words are subject to greater inhibition due to the existence of more similar words. Four experiments provide evidence for this view. In addition, reaction-time-based partitioning of the data shows that long words generate greater activation that is available both earlier and for a longer time than is the case for short words. As a result, lexical influences on phoneme identification are extremely robust for long words but are quite fragile and condition-dependent for short words. Models of word recognition must consider words of all lengths to capture the true dynamics of lexical activation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Some Aspects of Binding GKS to C++

Aspects of a prototype binding of GKS to the C++ programming language are presented. The binding makes use of classes and derived classes to define GKS concepts such as segments and workstations. Operator overloading is used for some GKS Functions.     

The synthesis of distillation-based separation systems

The last dozen years have produced almost 50 English language articles on the synthesis of separation systems [1]. Most work has considered separating a single relatively ideal mixture into sharply split, usually pure-component products using systems of single-feed, two-product distillation columns. Of late, the work has considered heat-integrating these columns to reduce energy consumption. Present research will very likely produce valuable results for nonsharp separations.Earlier approaches developed both algorithmic- and heuristic-based tree search algorithms for discovering the better systems of non-heat-integrated columns. New results permit the design of heat-integrated systems.The paper highlights the above developments.     

Moral Judgment and Crime Drama: An Integrated Theory of Enjoyment

The article proposes a theoretical framework in which moral reasoning about mediated crime and punishment is defined and combined with existing, affect-driven entertainment theory to yield an integrated theory of enjoyment. The authors analyze how crime dramas serve as statements about justice and then address how moral deliberation about the propriety of those statements impacts enjoyment. The authors report research findings to support the analysis of cognitive processing during crime dramas distinct from affective processing. The article also suggests future means by which the integrated theory of enjoyment can be examined.     

Studies on the in vitro Release of Ibuprofen from Polyethylene Glycol-Polyvinyl Acetate Mixtures Liquid Filled into Hard Gelatin Capsules

The release of ibuprofen from mixtures of polyethylene glycol (PEG) with polyvinyl acetate (PVAc) has been studied in vitro and complemented by x-ray diffraction measurements, differential scanning calorimetry (DSC), and melting point determinations via hot-stage microscopy (HSM). Results indicate that ibuprofen release can be affected markedly by alteration of the PVAc concentration. The molecular weight of the PEG and the pH of the dissolution medium are also shown to affect the release profile. Visual observation during the drug release process revealed a complex behavior which included emission of liquidlike droplets, formation of a crust around the releasing mass, and/or production of flakes of solid material. This behavior appeared to have a disadvantageous effect on the reproducibility of drug release. Construction of a phase diagram from results of thermal analysis using DSC and HSM indicated the formation of an eutectic mixture with a composition of 35% ibuprofen and 65% PEG 1500 and a melting point of 36°C. The complex behavior of the drug-releasing mass is discussed in terms of this phase diagram. Only the release data for systems containing 4% w/w or more of PVAc could be linearized by plotting against the square root of time whereas data for all of the systems studied could be linearized by first-order plots.     

Transrectal electrostimulation therapy for neuropathic bowel dysfunction in children with myelomeningocele

PURPOSE: We attempted to evaluate the efficacy of transrectal bowel stimulation for neurogenic bowel dysfunction in children with myelodysplasia. MATERIALS AND METHODS: Daily sessions of transrectal electrostimulation were performed on an outpatient basis for 2 to 3 weeks on children with myelodysplasia and stool incontinence. If benefits were noted, 5 to 10 additional daily sessions were performed. Complete success was defined as improvement in all parameters of interest, including decrease in the frequency of daily bowel movements, increased sensation, increased ability to hold stool and a significant subjective change in bowel habits. Moderate success implied improvement in 1 to 3 parameters and treatment failure was defined as lack of improvement in any parameter. RESULTS: A total of 55 children 2 to 14 years old (mean age 6.7) completed a mean of 18 daily sessions per patient of bowel electrostimulation. Followup ranged from 1 to 6 years. Diapers are no longer required due to defecation problems in 14 children older than 3 years. Complete success was achieved in 20 cases (36.3%) and moderate success in an additional 30 (54.5%, overall success rate 90.8%). Specifically, 89% of the patients reported elimination of stooling accidents, 82% reported increased sensation and 71% were able to hold the bowel movement. Overall 68% of the patients noticed significantly improved bowel function. Complete/moderate success of transrectal electro-stimulation was statistically significant for all 4 parameters (p < 0.05), and complete success was significant for increased sensation, ability to hold and episodes of accidents. Therapy failed in 5 children (9%). There were no untoward effects. CONCLUSIONS: Transrectal electrostimulation is a well tolerated and minimally invasive modality that provides sustainable improvement in stool continence in children with myelomeningocele and neuropathic bowel dysfunction.     

DMD-specific FISH probes are diagnostically useful in the detection of female carriers of DMD gene deletions

The challenge of Duchenne muscular dystrophy (DMD) carrier identification resides in the ability to identify the presence of a mutant gene over the background contributed by the normal allele. Current diagnosis of carrier status when a deletion has been identified in a proband is based on an analysis of a gene dosage. We present a diagnostic strategy that uses fluorescence in situ hybridization (FISH) to detect female carriers with major deletions in the dystrophin gene. We screened a human X-chromosome-derived genomic library with a full-length dystrophin cDNA and isolated 15 dystrophin-specific cosmids that contain DMD gene exons. Six cosmids were further tested as FISH probes in control individuals and subsequently applied on chromosomes from eight males with DMD and known deletions and on samples from three female carriers. As expected, X chromosomes in normal females displayed four signals, two for the DMD-specific probe and two for the X-chromosome centromeric probe. Hybridization on chromosomal spreads from carriers of deletions revealed only one signal from the DMD-specific probe and two from the control centromeric probe. Males carrying deletions showed no DMD-specific signal for the deleted exons tested. Our data indicate that FISH could represent an alternative method for the detection of female carriers with DMD gene deletions.     

BRING PLANNING DOWN TO EARTH

Applying information systems strategic planning (ISSP) theory to a practical planning effort is not a straightforward endeavor, and the penalties of a misapplied planning exercise are high. IS managers do not need another conceptual framework for ISSP as much as they need a practical point of view on driving the planning effort to produce tangible, high-quality results.     

The effect of cyclic stress on the physical properties of a poly(dimethylsiloxane) elastomer

The dynamic creep behavior of a filled poly(dimethylsiloxane) elastomer was studied under cyclic stress. The stress level was chosen such that the increase in the internal temperature was small and that microcracks were not observed. This work has demonstrated that cyclic stress in combination with high temperature accelerates the degradation of the elastomer. The results suggest that because of the applied force, breaks in the load-bearing chains of the network occur. These breaks, while relieving the mechanical stress, create highly reactive ionic fragments. It is believed that because of the subsequent reactions of the ionic fragments, changes in the specific gravity, storage modulus, effective crosslink density, and length of the sample (creep) are observed. The observed decrease in the storage modulus is thought to occur because of the reaction of the ionic fragments with moisture, which results in the formation of silanol chain ends that reduce the effective crosslink density. The results also show that contrary to the prediction of the Boltzmann's Superposition Principle, the rate of creep is greatly enhanced when the sample is subjected to a sinusoidally varying dynamic load as compared to a comparable static load. The polymer weight loss was found to be linear with time and strongly dependent on the level of applied dynamic and static force. In addition, the weight loss and rate of creep were also found to be strongly dependent upon temperature.     

The Heat Capacity of 4He Monolayers Adsorbed on Evaporated Gold

The specific heat of ⁴He condensed on an evaporated gold surface has been measured for coverages between 0.007 and 0.096 Å^?2 and temperatures between 0.4 and 3.0 K. There are at least two types of physisorption site on the gold surface with binding energies ?83 ± 7 and ?94 ± 7 K. For coverages below 0.06 Å^?2 (～0.5 monolayers), the ⁴He is a two-dimensional classical gas at sufficiently high temperatures. At lower temperatures and higher coverages, the ⁴He forms condensed phases, including liquids, solids commensurate with the gold lattice, and incommensurate solids. The phase diagram of ⁴He/evaporated gold is similar to that for ⁴He/graphite, but the phase boundaries are shifted and not well defined, nor is the diagram as rich in structure.