In this paper, size-dependent dynamic stability of axially loaded functionally graded (FG) composite truncated conical microshells with magnetostrictive facesheets surrounded by nonlinear viscoelastic foundations including a two-parameter Winkler–Pasternak medium augmented via a Kelvin–Voigt viscoelastic approach is analyzed considering nonlinear cubic stiffness. To this purpose, von Karman-type kinematic nonlinearity along with modified couple stress theory of elasticity was applied to third-order shear deformation conical shell theory in the presence of magnetic permeability tensor and magnetic fluxes. The numerical technique of generalized differential quadrature (GDQ) was used for the solution of microstructural-dependent dynamic stability responses of FG composite truncated conical microshells. It was seen that moving from prebuckling to postbuckling domain somehow increased the significance of couple stress type of size dependency on frequency. In addition, within both prebuckling and postbuckling regimes, an increase of material gradient index decreased the importance of couple stress type of size dependency on the frequency of an axially loaded FG composite truncated conical microshell. Furthermore, it was revealed that by applying a positive magnetic field to an axially loaded truncated conical microshell with magnetostrictive facesheets, its frequency at a specific axial load value was increased in prebuckling domain and decreased in postbuckling domain. However, this pattern was reversed by applying a negative magnetic field.
An efficient approach was introduced for improving the condition of major controlled rolling process parameters of roughing, finishing and coiling temperatures and optimizing these parameters to obtain minimum grain size and maximum dome height simultaneously. Taguchi method combined with grey relational analysis was applied to achieve optimum grain size and dome height during controlled rolling process. For this purpose, four levels for the above temperatures were chosen and sixteen experiments were conducted based on orthogonal array of Taguchi method. Based on Taguchi approach, signal-to-noise (S/N) ratios were calculated and used in order to obtain the optimum levels for every input parameter. Analysis of variance revealed that finishing and coiling temperatures have the maximum effect on the grain size and dome height of microalloyed steels. The confirmation tests with the optimal levels of parameters indicated that the grain size and dome height of controlled rolled microalloyed steels can be improved effectively through this approach. 相似文献
In this work, a novel thermally coupled reactor containing the steam reforming process in the endothermic side and the hydrogenation of nitrobenzene to aniline in the exothermic side has been investigated. In this novel configuration, the conventional steam reforming process has been substituted by the recuperative coupled reactors which contain the steam reforming reactions in the tube side, and the hydrogenation reaction in the shell side. The co-current mode is investigated and the simulation results are compared with corresponding predictions for an industrial fixed-bed steam reformer reactor operated at the same feed conditions. The results show that although synthesis gas productivity is the same as conventional steam reformer reactor, but aniline is also produced as an additional valuable product. Also it does not need to burn at the furnace of steam reformer. The performance of the reactor is numerically investigated for different inlet temperature and molar flow rate of exothermic side. The reactor performance is analyzed based on methane conversion, hydrogen yield and nitrobenzene conversion. The results show that exothermic feed temperature of 1270 K can produce synthesis gas with 26% methane conversion (the same as conventional) and nitrobenzene conversion in the outlet of the reactor is improved to 100%. This new configuration eliminates huge fired furnace with high energy consumption in steam reforming process. 相似文献
Cr–SiC nanocomposite coatings with various contents of SiC nanoparticles were prepared by electrodeposition in optimized Cr plating bath containing different concentrations of SiC nanoparticles. Direct current electrocodeposition technique was used to deposit chromium layers with and without SiC nanoparticles on mild carbon steel. The effects of current density, stirring rate and concentration of nanoparticles in the plating bath were investigated. Scanning electron microscopy was used to study surface morphology. Energy dispersive analysis technique was used to verify the presence of SiC nanoparticles in the coated layers. The corrosion behaviors of coatings were investigated by potentiodynamic polarization and electrochemical impedance spectroscopy methods in 0.05 mol/L HCl, 1 mol/L NaOH and 3.5% NaCl (mass fraction), respectively. Microhardness measurements and pin-on-disc tribometer technique were used to investigate the wear behavior of the coatings. 相似文献
This paper proposes an uncertainty compensator to design a novel robust control for mobile robots with dynamic and kinematic uncertainties. A novel gradient-based adaptive fuzzy estimator is developed to compensate uncertainties with minimum required feedback signals. As a novelty, the proposed approach uses the tracking error and its first time derivative to form the estimation error of uncertainty, and guarantees that both the estimation error and tracking error converge asymmetrically to ignorable value. Advantages of the proposed robust control are simplicity in design, robustness against uncertainties, guaranteed stability, and good control performance. The control approach is verified by stability analysis. Simulation results and experimental results illustrate the effectiveness of the proposed control. Experimental evaluation of the proposed controller is expressed for two different low-cost nonholonomic wheeled mobile robots. The proposed control design is compared with an adaptive control approach to confirm the superiority of the proposed approach in terms of precision, simplicity of design, and computations. 相似文献
A simple analytical model has been developed to simulate the performance of solar cells with polysilicon contact on the front surface. The polysilicon layer with a columnar grain structure is modeled by an effective recombination velocity using a two-dimensional transport equation. A one-dimensional transport equation in the single-crystal emitter is solved, taking into account bulk recombination and non-uniformly doped emitter. Then, simple analytical expressions for the emitter reverse saturation current and light-generated current densities are obtained. The collection of the light-generated carriers in polysilicon layer has been discussed and an analytical solution of the light-generated current is derived. The results show that the polysilicon layer can result in a decrease in emitter reverse saturation current density and an increase in solar cell photovoltaic parameters. In fact, the emitter region should not be treated as a ‘dead layer’ because thin polysilicon layer front surface contact gives an improvement of about 60 mV for the open-circuit voltage, 3.6 mA/cm2 for the photocurrent, and 3.9% for the cell efficiency. 相似文献
Partition coefficients of six migrants between four simulated foods (water, 10% ethanol, 3% acetic acid, 95% ethanol) and air were determined by the phase ratio variation (PRV) method using headspace analyses by gas chromatography. The migrants were ethyl acetate, methyl ethyl ketone, propyl alcohol, butyraldehyde, acetaldehyde and acetonitrile. The results showed that migrant absorption by the four food simulants was highly dependent on the physicochemical properties of migrants and foods, such as polarity, solubility and hydrogen-bonding. 相似文献