Design of a retention tank: comparison of stormwater quality models with various levels of complexity.

Stormwater quality simulation models are useful tools for the design and management of sewer systems. Modelling results are highly sensitive to experimental data used for calibration. This sensitivity is examined for three modelling approaches of various complexities (site mean concentration approach, event mean concentration approach and build-up, washoff and transport modelling approach) applied to a typical case study (design of a dry detention tank), accounting for the variability of calibration data and their effect on simulation results. Calibrated models with different calibration data sets were used to simulate 3 years of rainfall with different retention tank specific volumes. Annual pollutant load interception efficiencies were determined. Simulations results revealed (i) that there is no advantage in using the EMC model compared to the SMC model and (ii) that the BWT model resulted in higher design ratios than those given by the SMC/hydraulic approach. For both EMC and BWT models, using an increasing number n of events for calibration leads to narrower confidence intervals for the design ratios. It is crucial for design ratios to account for successive storm events in chronological order and to account for the maximum allowable flow to be transferred to the downstream WWTP.     

Multi-User MIMO Mobile CDMA Uplink System Employing Turbo Coding and Joint Detection Through a Multipath Rayleigh Fading Channel

In this paper, a generalized multiple-input multiple-output (MIMO) antenna system that can be fitted to the uplink of a wireless communication system is considered for the general case of multi-user. At the transmitter, the information bits are Turbo coded, then interleaved and passed through a serial-to-parallel converter. The channel is assumed bad urban suffering from multipath Rayleigh fading resulting in inter-symbol and multiple access interferences (ISI and MAI). At the front-end of the receiver, a number of receiving antennas are used followed by a joint multi-user estimator based on the Minimum Mean Square Error Block Linear Equalizer (MMSE-BLE).Computer simulations demonstrate a significant performance improvement in both single user and multi-user cases.This paper depends in parts on that presented at the 11th European Wireless Conference, Cyprus, Nicosia, pp. 187–192, April 2005. Yasmine A. Fahmy was born in Guiza, Egypt, on June 4, 1976. She received the B.Sc., M.Sc. and Ph.D. degrees in Communication and Electronics engineering from Cairo University, Egypt on 1999, 2001 and 2005 respectively. She is presently an assistant professor at Cairo University, Egypt. Her current field of interest is wireless communication and channel estimation. Hebat-Allah M. Mourad received her B.Sc., M. Sc. and Ph.D. degrees in electrical communication engineering from Cairo University, Egypt, in 1983, 1987 and 1994 respectively. Since 1983, she has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently associate professor there. Her research interests include optical fiber communications, mobile and satellite communications. Emad K. Al-Hussaini received his B.Sc degree in Electrical Communication Engineering from Ain-Shams University, Cairo, Egypt, in 1964 and his M.Sc and Ph.D. degrees from Cairo University, Giza, Egypt, in 1974 and 1977, respectively. From 1964 to 1970, he was with the General Egyptian Aeroorganization. Since 1970, he has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently professor there. He was a research fellow at Imperial College, London, UK, and at the Moore School of Electrical Engineering, University of Pennsylvania, Philadelphia, PA, USA, in the academic years 1976/1977 and 1981/1982, respectively. In 1990, he received the Egyptian national encouragement award for outstanding engineering research. He has written several papers for technical international journals and conferences. His research interests include signal processing, fading channel communication, modulation, and cellular mobile radio systems. Dr Al-Hussaini is a senior member of IEEE. He is listed in Marquis Whos Who in the World and in the IBC (International Biographical Center, Cambridge) for outstanding people of the 20th century.     

Characterization of Urine Stem Cell-Derived Extracellular Vesicles Reveals B Cell Stimulating Cargo

Elucidation of the biological functions of extracellular vesicles (EVs) and their potential roles in physiological and pathological processes is an expanding field of research. In this study, we characterized USC–derived EVs and studied their capacity to modulate the human immune response in vitro. We found that the USC–derived EVs are a heterogeneous population, ranging in size from that of micro–vesicles (150 nm–1 μm) down to that of exosomes (60–150 nm). Regarding their immunomodulatory functions, we found that upon isolation, the EVs (60–150 nm) induced B cell proliferation and IgM antibody secretion. Analysis of the EV contents unexpectedly revealed the presence of BAFF, APRIL, IL–6, and CD40L, all known to play a central role in B cell stimulation, differentiation, and humoral immunity. In regard to their effect on T cell functions, they resembled the function of mesenchymal stem cell (MSC)–derived EVs previously described, suppressing T cell response to activation. The finding that USC–derived EVs transport a potent bioactive cargo opens the door to a novel therapeutic avenue for boosting B cell responses in immunodeficiency or cancer.     

The effect of heat on metal incorporated silica gels

Silica gel prepared under varying conditions indicated that, in addition to the pH and kind of acid, the mode of adding the solutions govern the evolution of surface area of the produced xerogel. Co-precipitation with the oxides of iron, copper, or nickel showed a marked effect in decreasing the surface area of the dry gel. Xerogels incorporated with iron oxide suffered from a sharp sintering that appeared upon heating to 900 °C. Copper oxide-incorporated silicas showed a small decrease in surface area at the same temperature. However, silica incorporated with nickel oxide seems to be resistant to heat treatment at 900 °C, and exhibits only a small change in surface area. Acid treatment of the incorporated silicas resulted in negligible variations in surface area, probably due to the low content of oxides.     

Thermal stability of NO 2 ⋅ and NO⋅ radicals formed in an Al23 catalyst during its preparation from a nitrate precursor

During the preparation of alumina as a catalyst support from aluminium nitrates by precipitation with a NH₄OH base, NO ₂ ^⋅ radicals have been formed in the catalyst after calcination under air in the solid at different temperatures. These radicals remained stable until a calcination temperature of 800°C. When the calcined catalyst was degassed under vacuum above 300 °C, the NO ₂ ^⋅ was reduced to give NO^⋅ and O^- species which were both tightly trapped in the solid. These latter species remained stable until vacuum treatment at 800 °C. This revised version was published online in July 2006 with corrections to the Cover Date.     

CEVCLUS: evidential clustering with instance-level constraints for relational data

Recent advances in clustering consider incorporating background knowledge in the partitioning algorithm, using, e.g., pairwise constraints between objects. As a matter of fact, prior information, when available, often makes it possible to better retrieve meaningful clusters in data. Here, this approach is investigated in the framework of belief functions, which allows us to handle the imprecision and the uncertainty of the clustering process. In this context, the EVCLUS algorithm was proposed for partitioning objects described by a dissimilarity matrix. It is extended here so as to take pairwise constraints into account, by adding a term to its objective function. This term corresponds to a penalty term that expresses pairwise constraints in the belief function framework. Various synthetic and real datasets are considered to demonstrate the interest of the proposed method, called CEVCLUS, and two applications are presented. The performances of CEVCLUS are also compared to those of other constrained clustering algorithms.     

Robustness of ISS systems to inputs with limited moving average: Application to spacecraft formations

We provide a theoretical framework that fits realistic challenges related to spacecraft formation with disturbances. We show that the input‐to‐state stability of such systems guarantees some robustness with respect to a class of signals with bounded average‐energy, which encompasses the typical disturbances acting on spacecraft formations. Solutions are shown to converge to the desired formation, up to an offset, which is somewhat proportional to the considered moving average of disturbances. In the presence of fast peaking perturbations, the approach provides a tighter evaluation of the disturbances' influence, which allows for the use of more parsimonious control gains. Copyright © 2015 John Wiley & Sons, Ltd.     

On the composition of ISO 25964 hierarchical relations (BTG,BTP, BTI)

Knowledge organization systems (KOS) can use different types of hierarchical relations: broader generic (BTG), broader partitive (BTP), and broader instantial (BTI). The latest ISO standard on thesauri (ISO 25964) has formalized these relations in a corresponding OWL ontology (De Smedt et al., ISO 25964 part 1: thesauri for information retrieval: RDF/OWL vocabulary, extension of SKOS and SKOS-XL. http://purl.org/iso25964/skos-thes, 2013) and expressed them as properties: broaderGeneric, broaderPartitive, and broaderInstantial, respectively. These relations are used in actual thesaurus data. The compositionality of these types of hierarchical relations has not been investigated systematically yet. They all contribute to the general broader (BT) thesaurus relation and its transitive generalization broader transitive defined in the SKOS model for representing KOS. But specialized relationship types cannot be arbitrarily combined to produce new statements that have the same semantic precision, leading to cases where inference of broader transitive relationships may be misleading. We define Extended properties (BTGE, BTPE, BTIE) and analyze which compositions of the original “one-step” properties and the Extended properties are appropriate. This enables providing the new properties with valuable semantics usable, e.g., for fine-grained information retrieval purposes. In addition, we relax some of the constraints assigned to the ISO properties, namely the fact that hierarchical relationships apply to SKOS concepts only. This allows us to apply them to the Getty Art and Architecture Thesaurus (AAT), where they are also used for non-concepts (facets, hierarchy names, guide terms). In this paper, we present extensive examples derived from the recent publication of AAT as linked open data.     

A framework for dynamic implicit curve approximation by an irregular discrete approach

The approximation of implicit planar curves by line segments is a very classical problem. Many algorithms use interval analysis to approximate this curve, and to handle the topology of the final reconstruction. In this article, we use discrete geometry tools to build an original geometrical and topological representation of the implicit curve. The polygonal approximation contains few segments, and the Reeb graph permits to sum up efficiently the shape and the topology of the curve. Furthermore, we propose two algorithms to process local cells refinement and local cells grouping schemes. We illustrate these schemes with a global system that efficiently handles manual or automatic fast updates on the global reconstruction, by considering topological or geometrical constraints. We also compare the speed and the quality of our approach with two classical methods.     

Workload assignment for global real-time scheduling on unrelated clustered platforms

Real-Time Systems - Heterogeneous MPSoCs are being used more and more, from cellphones to critical embedded systems. Most of those systems offer heterogeneous sets of identical cores. In this...