Modeling of Diffusion in Capillary Porous Materials During the Drying Process

This paper presents a model of heterogenous diffusion in capillary porous materials during the process of drying. The governing heat and mass transfer equations have been established using the liquid as well as vapor flow. Two models have been presented. Model 1 does not consider the heat conduction while the model 2 has been established by considering the conduction. The developed models and the numerical solutions of the resulting differential equations can take into account the moisture and temperature dependent thermophysical properties of the product. All equations have been established in spherical coordinates but the programme written for the purpose of calculations can be used for other geometries also. Numerical calculations have been performed for gas concrete and tiles using model 1, while model 2 has been used for gas concrete only because of the lack of data for thermophysical properties of the tile. For gas concrete it was seen that conduction has only marginal effect on the drying process and the numerical predictions of the drying process were reasonably accurate.     

A Pervasive Computing Curriculum for Engineering and Science Students

Today, there's an urgent need for well-trained pervasive computing engineers and scientists. Pervasive computing has evolved into a critical field, influencing a broad range of industries from healthcare to manufacturing to defense. However, most computer engineering and computer science programs pay marginal attention, at best, to the field. In this issue, the authors of the Rochester Institute of Technology describes a set of courses on pervasive computing topics and a supporting laboratory designed for both computer engineering and computer science students     

Reaction of zirconium fluoride glass with water: kinetics of dissolution

When liquid water contacts a zirconium-barium-lanthanum fluoride glass, at least three different processes occur. Barium and zirconium fluoride dissolve into the water, water penetrates into the glass, and zirconium fluoride crystals grow on the glass surface, in static solution. The rate of dissolution, as measured by solution analysis, is possibly controlled by diffusion in the solid surface; surface blockage and surface reactions are other possible kinetic steps involved. Diffusion in solution is not the controlling mechanism. Hydrogen profiles in the glass surface suggest that the penetration rate of water into the glass is controlled by diffusion and a surface reaction.     

A rule-based fuzzy-logic approach for the measurement of manufacturing flexibility

Manufacturing flexibility is a difficult to quantify concept that defies universal definition. This paper presents a novel fuzzy-logic approach for measuring manufacturing flexibility that exploits linguistic variables for quantifying pertinent factors affecting commonly utilized flexibility types. Towards this end, we identify and measure the contribution of specified state variables towards the assumed flexibility types in order to compute an overall flexibility index for a generic manufacturing system. The suggested framework provides a convenient end user approach amenable to software implementation that is exemplified through the development of a prototypical software tool called “Flexibility Evaluator”.     

Geometrical and sequence characteristics of alpha-helices in globular proteins

Understanding the sequence-structure relationships in globular proteins is important for reliable protein structure prediction and de novo design. Using a database of 1131 alpha-helices with nonidentical sequences from 205 nonhomologous globular protein chains, we have analyzed structural and sequence characteristics of alpha-helices. We find that geometries of more than 99% of all the alpha-helices can be simply characterised as being linear, curved, or kinked. Only a small number of alpha-helices ( approximately 4%) show sharp localized bends in their middle regions, and thus are classified as kinked. Approximately three-fourths (approximately 73%) of the alpha-helices in globular proteins show varying degrees of smooth curvature, with a mean radius of curvature of 65 +/- 33 A; longer helices are less curved. Computation of helix accessibility to the solvent indicates that nearly two-thirds of the helices ( approximately 66%) are largely buried in the protein core, and the length and geometry of the helices are not correlated with their location in the protein globule. However, the amino acid compositions and propensities of individual amino acids to occur in alpha-helices vary with their location in the protein globule, their geometries, and their lengths. In particular, Gln, Glu, Lys, and Arg are found more often in helices near the surface of globular proteins. Interestingly, kinks often seem to occur in regions where amino acids with low helix propensities (e.g., beta-branched and aromatic residues) cluster together, in addition to those associated with the occurrence of proline residues. Hence the propensities of individual amino acids to occur in a given secondary structure depend not only on conformation but also on its length, geometry, and location in the protein globule.     

Design of novel compact anti-stiction and low insertion loss RF MEMS switch

A novel torsional RF MEMS capacitive switch design on silicon substrate is presented. The optimized switch topology such as reduction in up-state capacitance results in insertion loss better than ?0.1 dB till 20 GHz. Off to on state capacitance ratio is also improved by 18 fold and isolation is better than ?43 dB at 9.5 GHz. The achieved on state return loss is ?38 dB as compared to ?21 dB at 9.5 GHz. An optimized reduction in contact area and use of floating metal layer increases the switching speed from 56 to 46 μsec. It also increases the switch reliability by alleviating the stiction.     

Studies on chemical resistance of polyesters

Chlorendic anhydride based polyester ( I ,) tetrachlorophthalic anhydride based polyester ( II ), dibromoneopentyl glycol based polyester ( III ,) general purpose polyester ( IV ,) blend of dibromoneopentyl glycol based polyester with general purpose polyester ( V ,) chlorendic anhydride and dibromoneopentyl glycol based polyester ( VI ), and a blend of chlorendic anhydride based polyester and dibromoneopentyl glycol based polyester ( VII ) were prepared and their chemical resistance and moisture absorption studied in various reagents, acid, alkali, and water, at 25 and 65°C. It is found that the polyester ( III ) is the least affected in the presence of the acids. In 20% NaOH, there was a decrease in weight for all polyesters at both the temperatures compared to the control except the polyester ( VII ). Increase in weight of all the polyesters was observed during the absorption of moisture both at 25 and 65°C. The increase was higher at higher temperature. Polyester ( III ) thus shows the least absorption of moisture.     

Antiandrogen and Antimicrobial Aspects of Coordination Compounds of Palladium(II), Platinum(II) and Lead(II)

Synthesis, characterization and antimicrobial activities of an interesting class of biologically potent macrocyclic complexes have been carried out. All the complexes have been evaluated for their antimicrobial effects on different species of pathogenic fungi and bacteria. The testicular sperm density, testicular sperm morphology, sperm motility, density of cauda epididymal spermatozoa and fertility in mating trails and biochemical parameters of reproductive organs have been examined and discussed. The resulting biologically active [M(MaL(n))(R(2))]Cl(2) and [Pb(MaL(n))(R(2))X(2)] (where, M = Pd(II) or Pt(II) and X = Cl or NO(3)) type of complexes have been synthesized by the reactions of macrocyclic ligands (MaL(n)) with metal salts and different diamines in 1:1:1 molar ratio in methanol. Initially the complexes were characterized by elemental analyses, molecular weight determinations and conductivity measurements. The mode of bonding was established on the basis of IR, (1)H NMR, (13)C NMR, (195)Pt NMR, (207)Pb NMR, XRD and electronic spectral studies. The macrocyclic ligand coordinates through the four azomethine nitrogen atoms which are bridged by benzil moieties. IR spectra suggest that the pyridine nitrogen is not coordinating. The palladium and platinum complexes exhibit tetracoordinated square-planar geometry, whereas a hexacoordinated octahedral geometry is suggested for lead complexes.     

Multi-Model Approach to Assess the Dynamics of Hydrologic Components in a Tropical Ecosystem

Estimation of terrestrial water budget at global and regional scales are essential for efficient agricultural water management, flood predictions, and, hydrological modeling. In hydrological modeling, it is a challenging task to quantify the major hydrological components like runoff, evapotranspiration (ET), and total water storage (TWS) due to improper and limited availability of detailed meteorological datasets. Furthermore, there has been no consensus to answer a-decade-long critical question that a less data-intensive models can be an alternate to robust data-intensive models in data scarce conditions. This study aims at multi-model approach over the single models usage for representing the hydrological behaviour in the Kangsabati River Basin (KRB), India. It is done by applying the standard model selection criteria over various hydrological models. Two hydrological models are selected, a semi- distributed model, Variable Infiltration Capacity (VIC-3 L), and a conceptually lumped model, Identification of unit Hydrograph and Component flows from Rainfall, Evapotranspiration and Streamflow (IHACRES). Both models were calibrated against the observed daily discharge at the KRB outlet for the period of 2001–2006 and validated for 2008–2010. The results show that both VIC-3 L and IHACRES produce reasonable runoff estimates at daily and monthly time scale in the KRB. The ET estimates show that VIC-3 L and IHACRES captured the seasonal variations with the percent change of 0.4% and 6.6% respectively. As IHACRES is simpler, parsimonious, fewer parameters, and better performances, it can be useful for hydrological modeling in data-scarce regions.