Electrical and optical properties of semi-insulating polycrystalline silicon thin films: the role of microstructure and doping

We have investigated the relationship between microstructure and electrical conductivity in semi-insulating polycrystalline silicon (SIPOS) with oxygen concentrations in the 2–35 at.% range and the effect of doping with boron, phosphorus, arsenic and erbium by ion implantation. SIPOS thin films are mixtures of silicon and silicon oxide phases. The chemical and morphological evolution of these phases upon annealing is emphasized. Electrical conductivity measurements are interpreted in terms of a physical model containing few free parameters related to the material microstructure. A direct extension of this model explains also the conductivity increase in SIPOS doped with elements of the third or the fifth group. In the last part of the paper, data of electroluminescence at 1.54 μm in Er-implanted SIPOS due to intra-4f transitions of the Er³⁺ ion are shown and discussed.     

Xylene Isomerization in a ZSM-5/SS Membrane Reactor

A membrane reactor containing different types of ZSM-5/porous SS membranes was used to perform the xylene isomerization reaction. The parent Na-ZSM-5 layer was synthesized by secondary growth on top of porous stainless steel tubes. The xylene isomerization reaction was carried out at different temperatures in the membrane reactor and in a fixed-bed reactor of identical geometry for comparison. Two different kinds of membranes were prepared by ion exchange: a Pt/H-ZSM-5 catalytic membrane and two Ba-ZSM-5 composites with different Ba²⁺ concentration. The p-xylene production using 100% exchanged Ba-membrane was about 28% higher than the fixed-bed reactor at 370 °C, when m-xylene was fed.     

Coupling of free surface and groundwater flows

In this paper we present some preliminary results about the coupling of shallow water equations for free surface flows and Darcy equation for groundwater flows. A suitable set of interface conditions is discussed: the Beavers and Joseph formula for the bottom stress is used. An iterative algorithm to solve the coupled problem is proposed and some numerical results are presented.     

A methodology for the performance evaluation of data querystrategies in universal mobile telecommunication systems (UMTS)

The anticipated emergence of third-generation mobile systems, referred to as universal mobile telecommunication systems (UMTS), raises the problem of reconsidering the design of the databases destined to contain the user information. In particular, it is expected that the key concepts of the new database architectures will be high distribution and fast updating of information. So far, the problem of determining the most appropriate distributed database (DDB) architectures for third-generation mobile systems has not been widely dealt with in literature. This paper presents a methodology for evaluating hierarchical DDB architectures by means of an analytical model of the data querying operation. This methodology allows for structural alternatives, differing on account of the number of levels and branches in the hierarchy, to be evaluated in terms of query loads and mean response times, according to a given user mobility characterization and a given search protocol operation. By way of illustration, the paper discusses a case study, concerning a query operation arising from a location updating procedure and applied to a hierarchical tree-like DDB in which some structural alternatives are considered     

Semantic annotation of narrative media objects

This paper addresses the annotation of the narrative features of media objects. Based on a relevant narratological and computational background, we introduce an ontology?Cbased model called Drammar, an annotation schema for the narrative features of media objects based on Drammar and a software tool, Cinematic, for annotating these objects and validating the annotation. Annotated media objects can also be automatically edited into sequences, with the twofold goal of testing the validity of the annotation??through the reconstruction of the baseline sequence??and exploring the possibility of alternative sequences. The software tool encodes both the narrative model and the annotation itself in ontological format, and relies on external ontologies for representing world knowledge and limit the arbitrariness of the annotation. The paper opens the way to the design of a general annotation schema for narrative multimedia with the long?Cterm goal of building large corpora of annotated video material and of bridging the gap between the low?Clevel signal analysis and the high?Clevel semantic representation of the narrative content of the media objects. Finally, the paper illustrates a few projects elaborated with the Drammar annotation and the Cinematic tool, with purposes of artistic research and cross?Cmedia analysis, that provide an empirical validation of the annotation process.     

Preparation of grids for simulations of groundwater flow in fractured porous media

This work presents an extension of grid generation techniques for finite-volume discretizations of density-driven flow in fractured porous media, in which fractures are considered as low-dimensional manifolds and are resolved by sides of grid elements. The proposed technique introduces additional degrees of freedom for the unknowns assigned to the fractures and thus allows to reconstruct jumps of the solution over a fracture. Through the concept of degenerated elements, the proposed technique can be used for arbitrary junctions of fractures but is sufficiently simple regarding the implementation and allows for the application of conventional numerical solvers. Numerical experiments presented at the end of the paper demonstrate the applicability of this technique in two and three dimensions for complicated fracture networks.     

Determination of Binder Decomposition Kinetics for Specifying Heating Parameters in Binder Burnout Cycles

The decomposition kinetics of poly(vinyl butyral) binder from barium titanate multilayer ceramic capacitors with platinum metal electrodes were analyzed by thermogravimetric analysis as a function of the heating rate. The activation energy and pre-exponential factor for the decomposition kinetics were determined from two types of integral equations, from the Redhead method, and from the variation in heating rate method. The accuracy of the kinetic parameters determined from these methods was then evaluated for describing the observed rate of binder decomposition. Although the individual models yielded very different kinetic parameters, all were capable of describing the experimental data within ±15% accuracy. The kinetic parameters were then used in a coupled transport and kinetic model for describing the buildup of pressure within the ceramic green body as a function of the heating cycle. A methodology based on calculus of variations was also developed to predict the minimum duration for the binder burnout cycle.     

Strain-Induced Deformation in Magnesia–Alumina Layered Composites

Ceramic beams are induced in situ to form complex shapes at elevated temperature without the application of an external stress. This process has been demonstrated for thin alumina substrates coated with a layer of magnesia. The internal strain causing the substrates to deform at elevated temperature arises as a consequence of strain mismatch accompanying the penetration of the coating into the substrate. The magnitude of the deformation depends on the amount of coating applied, on the thickness of the substrate, on the density of the substrate, and on the temperature. During exposure of the beams to elevated temperature, the magnesia coating reacts with the alumina substrate to form the spinel phase; the resulting volume change accompanying the phase transformation is likely the predominant driving force for deformation.     

Influence of ABS type on morphology and mechanical properties of PC/ABS blends

The morphology and the mechanical properties of polycarbonate (PC) blends with different acrylonitrile–butadiene–styrene (ABS) materials were investigated. PC/ABS blends based on a mass-made ABS with 16% rubber and large (0.5–1μm) rubber particles are compared to blends based on an emulsion-made ABS with 50% rubber and small, monodisperse (0.12 μm) rubber particles over the full range of blend compositions. The blends with the bulk ABS showed excellent impact strength for most compositions, and those containing 50 and 70% PC exhibited ductile to brittle transition temperatures below that of PC. The blends with the emulsion ABS showed excellent toughness in sharp notch Izod impact tests at room temperature and in standard notch Izod impact tests at low temperatures near the T_g of the rubber. By melt blending the various ABS materials with a styrene–acrylonitrile (SAN 25) copolymer, materials with lower rubber concentrations were obtained. These materials were used in blends with PC to make comparisons at constant rubber concentration of 5, 10, and 15%. The results of this investigation show that brittle ABS materials can produce tough PC–ABS blends. It is apparent that small rubber particles toughen PC–ABS blends at lower rubber concentrations and at lower temperatures than is possible with large rubber particles. However, additional work is needed to understand the nature of toughening in these PC–ABS blends with different rubber phase morphologies. It is of particular interest to understand the exceptional ductility of some of the blends at low temperatures. © 1994 John Wiley & Sons, Inc.     

Healing Effect of Controlled Anti‐Electromigration on Conventional and High‐Tc Superconducting Nanowires

The electromigration process has the potential capability to move atoms one by one when properly controlled. It is therefore an appealing tool to tune the cross section of monoatomic compounds with ultimate resolution or, in the case of polyatomic compounds, to change the stoichiometry with the same atomic precision. As demonstrated here, a combination of electromigration and anti‐electromigration can be used to reversibly displace atoms with a high degree of control. This enables a fine adjustment of the superconducting properties of Al weak links, whereas in Nb the diffusion of atoms leads to a more irreversible process. In a superconductor with a complex unit cell (La_2?x Ce_x CuO₄), the electromigration process acts selectively on the oxygen atoms with no apparent modification of the structure. This allows to adjust the doping of this compound and switch from a superconducting to an insulating state in a nearly reversible fashion. In addition, the conditions needed to replace feedback controlled electromigration by a simpler technique of electropulsing are discussed. These findings have a direct practical application as a method to explore the dependence of the characteristic parameters on the exact oxygen content and pave the way for a reversible control of local properties of nanowires.