Photocatalytic Property and Electronic Structure of Lanthanide-based Oxysulfides

Lanthanide-based oxysulfides and sulfide, LnTaO_3.5S_0.5, Ln₁₀OS₁₄ (Ln = La, Pr, Nd, Sm) and La₄In₅S₁₃, were successively synthesized by sulfurization in a flowing H₂S. The sulfurization decreased the band-gap energies from >4 eV to <3eV, because of the formation of occupied S3p orbitals on the top of valence band. In accordance with the small band gap, the H₂ evolution from a 0.01 M Na₂S and 0.01 M Na₂SO₃ solution system was observed under irradiation of light up to >500 nm. The rate of H₂ evolution under light irradiation of >500 nm increased in the order of Ni/LaTaO_3.5S_0.5 < Ru/La₁₀OS₁₄ < Pt/La₄In₅S₁₃.     

Self-healing algorithm for logical mesh connection on ring networks

A self-healing algorithm is proposed for a ring network connected as a logical mesh. It offers good performance in terms of protection line capacity, restoration time, and survivability against multiple failures     

Formation of low-resistivity poly-Si and SiNx films by Cat-CVD for ULSI application

In this paper, bulk-Si metal–oxide–semiconductor field effect transistors (MOSFETs) are fabricated using the catalytic chemical vapor deposition (Cat-CVD) method as an alternative technology to the conventional high-temperature thermal chemical vapor deposition. Particularly, formation of low-resistivity phosphorus (P)-doped poly-Si films is attempted by using Cat-CVD-deposited amorphous silicon (a-Si) films and successive rapid thermal annealing (RTA) of them. Even after RTA processes, neither peeling nor bubbling are observed, since hydrogen contents in Cat-CVD a-Si films can be as low as 1.1%. Both the crystallization and low resistivity of 0.004 Ω·cm are realized by RTA at 1000 °C for only 5 s. It is also revealed that Cat-CVD SiN_x films prepared at 250 °C show excellent oxidation resistance, when the thickness of films is larger than approximately 10 nm for wet O₂ oxidation at 1100 °C. It is found that the thickness required to stop oxygen penetration is equivalent to that for thermal CVD SiN_x prepared at 750 °C. Finally, complementary MOSFETs (CMOSs) of single-crystalline Si were fabricated by using Cat-CVD poly-Si for gate electrodes and SiN_x films for masks of local oxidation of silicon (LOCOS). At 3.3 V operation, less than 1.0 pA μm⁻¹ of OFF leakage current and ON/OFF ratio of 10⁷–10⁸ are realized, i.e. the devices can operate similarly to conventional thermal CVD process.     

Heat and mass transfer in non-newtonian fluid flow with power function velocity profiles

Heat and mass transfer in laminar and turbulent non-Newtonian fluids is investigated in this work using the power function velocity profiles. Analytical solutions are presented for cases of mass transfer in laminar non-Newtonian fluid flows, namely for a flat velocity profile (plug flow), for the case of a constant velocity gradient at the solid boundary (Couette flow), and for the velocity distribution within a laminar boundary layer on a flat plate, and these are illustrated by rotating disks and cylinders in laminar Ostwald-de Waele fluids. Further, turbulent mass transfer processes (tubular flow, rotating disk, and rotating cylinder) in non-Newtonian fluids (Ostwald-de Waele fluid and drag-reducing fluid) at low and large Schmidt numbers are also discussed using the solutions of mass transfer in flows with power function velocity profiles. Reasonable agreement is found between the predictions of this work and the available experimental data and correlations.     

Depolymerization of fluoroalkyl methacrylate polymers as studied with thermogravimetry

Thermal behaviors of a few kinds of poly(fluoroalkyl methacrylate) prepared by γ-or UV-ray polymerization were investigated by using thermogravimetric measurements with the intermittent analysis of the gaseous products. The degradation of fluoroalkyl methacrylate polymers, monomeric units of which were CH₂=C(CH₃)COOCH₂(CF₂CF₂)_nH, n = 1, 2, and 3, proceeded according to the depolymerization mechanism reproducing the pristine monomer exclusively, but the thermogram in inert atmosphere showed the features of a two-step reaction. Two species of polymer differing in the heat stability were supposed to exist in the polymeric substance produced by γ- or UV-ray irradiation, and the fraction of polymer having lower heat stability increased with the increasing length of the fluoroalkyl ester group. In air, however, the thermogram of poly(fluoroalkyl methacrylate) showed no such a stepwise weight decrease as was observed in inert atomsphere with the elevating temperature, and the temperatures at which the depolymerization was introduced shifted to a much higher region. The results were ascribed to the reaction of initiating polymer radicals produced on polymer having lower stability with oxygen to form hydroperoxide, which once stabilized the polymer radicals and obstructed the initiaition of the unzipping reaction till higher temperature.     

Depolymerization of poly(fluoroalkyl methacrylate-co-methyl methacrylate) as studied with thermogravimetry

Thermal behaviors of a few kinds of poly(fluoroalkyl methacrylate-co-methyl methacrylate) prepared by γ-ray copolymerization were investigated by using thermogravimetric measurements together with the intermittent analysis of the gaseous products. The thermal degradation of copolymers composed of one of fluoroalkyl methacrylates of the following structures: CH₂?C(CH₃)COOCH₂(CF₂CF₂)_nH, where n = 1,2, and 3, and methyl methacrylate proceeded according to the depolymerization mechanism reproducing the pristine component comonomers exclusively, but their thermograms in inert atmosphere showed the feature of a two-step reaction. In air, however, thermograms of copolymers did not show such a stepwise decrease in weight with the elevating temperature, and temperatures at which depolymerization was introduced shifted to a much higher region. The overall aspects of depolymerization of copolymers seemed to be much similar to that of fluoroalkyl methacrylate homopolymer previously reported, and the retardation of depolymerization by air was considered to be due mainly to the stabilization of once-formed polymer radicals by oxygen.     

Phase separation behavior and morphology development of phenolic resin/PMMA/hexamethylenetetrarnine blends

Summary In order to obtain materials with nanopores which will be applicable for many fields, the structures of the cured blends of phenolic resin (PhN), poly(methyl methacrylate) (PMMA) and curing agent were studied. After PMMA was extracted from cured blends, the structures of cured phenolic resins were observed with SEM. As a results, it was found that nanosized continuous pore structures were formed in extremely wide composition region if curing temperature was high.     

Slc25a39 and Slc25a40 Expression in Mice with Bile Duct Ligation or Lipopolysaccharide Treatment

SLC25A39/40, involved in mitochondrial GSH (mGSH) import from the cytoplasm, is essential for protection against oxidative stress and mitochondrial dysfunction. We examined the effects of cholestasis, through bile duct ligation (BDL) and lipopolysaccharide (LPS)-induced inflammation in mice, on Slc25a39/40 expression. Additionally, we used human clear cell renal carcinoma (KMRC-1) cells to elucidate the mechanism of regulation of SLC25A39/40 expression in the kidneys after LPS treatment. BDL resulted in a decrease in Slc25a39 mRNA in the liver and a decrease in Slc25a39/40 mRNA and protein in the kidneys. Consequently, there was a significant decrease in mGSH levels in the kidneys of BDL mice compared with those in sham mice. LPS treatment resulted in increased Slc25a40 expression in the kidneys. In KMRC-1 cells, the combination treatment of LPS-RS or FPS-ZM1 with LPS suppressed the LPS-induced increase in SLC25A40, suggesting that SLC25A40 expression could be regulated by the signaling pathway via toll-like receptor 4 and the receptor for advanced glycation end products, respectively. Our findings contribute to understanding the role of mGSH in the maintenance of the mitochondrial redox state. To the best of our knowledge, this is the first study that demonstrates the changes in Slc25a39/40 expression in mice with cholestasis-associated renal injury and LPS-induced inflammation.     

Bone Tissue Engineering in Rat Calvarial Defects Using Induced Bone-like Tissue by rhBMPs from Immature Muscular Tissues In Vitro

This study aimed to induce bone-like tissue from immature muscular tissue (IMT) in vitro using commercially available recombinant human bone morphogenetic protein (rhBMP)-2, rhBMP-4, and rhBMP-7, and then implanting this tissue into a calvarial defect in rats to assess healing. IMTs were extracted from 20-day-old Sprague-Dawley (SD) fetal rats, placed on expanded polytetrafluoroethylene (ePTFE) with 10 ng/μL each of rhBMP-2, BMP-4, and BMP-7, and cultured for two weeks. The specimens were implanted into calvarial defects in 3-week-old SD rats for up to three weeks. Relatively strong radiopacity was observed on micro-CT two weeks after culture, and bone-like tissue, comprising osteoblastic cells and osteoids, was partially observed by H&E staining. Calcium, phosphorus, and oxygen were detected in the extracellular matrix using an electron probe micro analyzer, and X-ray diffraction patterns and Fourier transform infrared spectroscopy spectra of the specimen were found to have typical apatite crystal peaks and spectra, respectively. Furthermore, partial strong radiopacity and ossification were confirmed one week after implantation, and a dominant novel bone was observed after two weeks in the defect site. Thus, rhBMP-2, BMP-4, and BMP-7 differentiated IMT into bone-like tissue in vitro, and this induced bone-like tissue has ossification potential and promotes the healing of calvarial defects. Our results suggest that IMT is an effective tissue source for bone tissue engineering.     

Selective enumeration of viable Enterobacteriaceae and Pseudomonas spp. in milk within 7 h by multicolor fluorescence in situ hybridization following microcolony formation

Rapid and simultaneous enumeration of viable Enterobacteriaceae and viable Pseudomonas spp. in milk was achieved by using multicolor fluorescence in situ hybridization (FISH) with oligonucleotide probes based on 16S ribosomal RNA (rRNA) sequences in combination with a microcolony growth method (multicolor microcolony-FISH; MMC-FISH). The procedure of MMC-FISH method is rather simple; that is milk clearing, filtration of cells, incubation, hybridization and enumeration. Enumeration of targeted bacteria in logarithmic growth phase, stationary phase, or in a starved state in milk by MMC-FISH required 5-7 h, while it took 1-3 days to test for Escherichia coli and Pseudomonas putida by the conventional culture method. The numbers of E. coli and P. putida in each phase or in a starved state in milk determined by MMC-FISH were almost the same or greater than the number of colony forming units determined by the plate counting method. The MMC-FISH allows rapid examination of contamination in milk by viable Enterobacteriaceae and Pseudomonas spp. with growth potential.