An investigation into physicochemical characteristics of ash produced from combustion of oil palm biomass wastein a boiler

Ash derived from combustion of Malaysian oil palm biomass (empty fruit bunches consisting of fibers) was physically and chemically characterized in order to provide a comprehensive understanding of its specific properties in terms of toxicity, compositions and reusability. Principal analyses conducted include particle size distribution, scanning electron microscopy, elemental dispersive X-ray, elemental analysis, toxicity characteristic leaching procedure (TCLP) as well as thermogravimetric, X-ray diffractometry and Fourier-transform infrared analyses. TCLP result indicated that the oil palm ash (OPA) should not be classified as toxic wastes in terms of heavy metal leachability since leachable copper, cadmium, lead and nickel concentrations were detected below the stipulated leachability limits. It was determined that the OPA contained high amount of potassium as well as presence of silica which implied its suitability to be reused as crude fertilizer or cement replacement material.     

优化移动多媒体传输链的功耗

消费者对于移动多媒体的需求是毫无疑问的，满足这些需求的技术已经开发成功，对于设计人员而言，剩下的问题就是如何利用这些技术，并将成功的产品带入市场。本文将讨论如何减省移动多媒体设备内关键元件的功耗，此外也会对现今移动多媒体设备设计人员所面对的工程挑战作出概括的分析，并就目前及新涌现的硅技术，提出可克服这些工程挑战的解决方案。     

Investigations of surface characterization of silicone rubber due to tracking phenomena under a.c. and d.c. voltages

In the present work, tracking phenomena has been studied with silicone rubber material under the a.c. and d.c. voltages following IEC-587 standards. The surface condition of the tracked zone was analysed using wide angle X-ray diffraction (WAXD) and thermogravimetric differential thermal analysis (TG-DTA) studies. The tracking time was different for a.c. and d.c. voltages.     

Influence of the silicon surface treatment by plasma etching and scratching on the nucleation of diamond grown in HFCVD - a comparative study

A comparative study for the nucleation of diamond was carried out using surface treatment like (i) surface scratching with 1 μm diamond paste and (ii) surface etching using chlorine plasma at different RF powers (50, 100 and 150 W). Atomic force microscopic study shows variation in roughness from 31 nm to 110 nm. Scratching results in random scratches, whereas plasma etches a surface uniformly. Scanning electron microscopic observations show well faceted crystallites with a predominance of angular shaped grains corresponding to 〈100〉 and 〈110〉 crystallite surfaces for the scratched as well as plasma etched substrate. Surface etching at 150 W plasma power results in a better growth in comparison with 50 and 100 W plasma powers. Chlorine-radical is found responsible for the changes in the growth morphology. Raman spectroscopy shows a sharp peak at 1,332 cm⁻¹ and a peak at ∼1,580 cm⁻¹ for both samples.     

Enzymic and in sacco methods to estimate rumen degradation of food protein in cattle

BACKGROUND: Two factorial studies compared enzymic and in sacco methods to estimate degradation of ruminant foods. Enzyme degradation (in vitro = enzyme) was determined from the release of leucine‐equivalent amino acid (LA) crude protein (CP) from sunflower meal (SF), maize gluten meal (MG), distillers' dark grain (DG) and field beans (FB) after their separate incubations with Streptomyces griseus enzyme for 0–24 h. In sacco crude protein (CP) degradation of these foods was estimated during washing (0 h) and rumen incubations in fistulated cows for 2–24 h. The LA data were expressed as g LA per either kg of CP (LACP) or acid‐hydrolysable LA (HLA) of each food and compared with in sacco data. RESULTS: These methods showed comparable degradation with time (P < 0.01). The in sacco and HLA were greater than LACP for all foods except MG where in sacco value was either lower or equal to LACP depending upon the incubation time (P > 0.05 or P < 0.05). Conversely, HLA was significantly (P < 0.01) greater than LACP from 2 h onwards. At 0 h, in sacco values were significantly greater than those of enzyme for SF, DG and FB (P < 0.05) but not for MG. The foods differed significantly for degradation constants (a, b, c) in each method (P < 0.05). CONCLUSIONS: Despite variations between in sacco and enzyme estimates for different foods, the relationships between these estimates suggest that the HLA enzyme method has the potential to estimate food degradation. Copyright © 2007 Society of Chemical Industry     

Dynamic Testing of Prestressed Concrete Bridges and Numerical Verification

This paper describes different dynamic tests carried out on three bridges, B14, B15, and B13, over highway E19, which connects Brussels and Antwerpen in Belgium. Different excitation types are considered: a drop weight, a heavy truck on the bridge, and ambient vibrations mainly due to the traffic under the bridge. Finite-element models are constructed to support and verify the dynamic measurements. The modal parameters are extracted from the response time series using the data dependent system approach. A vector autoregressive model is developed and successfully applied to the measured responses in time domain. Good correlation between the finite-element simulations and the experiments is obtained.     

A novel chaotic Henry gas solubility optimization algorithm for solving real-world engineering problems

The paper proposes a novel metaheuristic based on integrating chaotic maps into a Henry gas solubility optimization algorithm (HGSO). The new algorithm is named chaotic Henry gas solubility optimization (CHGSO). The hybridization is aimed at enhancement of the convergence rate of the original Henry gas solubility optimizer for solving real-life engineering optimization problems. This hybridization provides a problem-independent optimization algorithm. The CHGSO performance is evaluated using various conventional constrained optimization problems, e.g., a welded beam problem and a cantilever beam problem. The performance of the CHGSO is investigated using both the manufacturing and diaphragm spring design problems taken from the automotive industry. The results obtained from using CHGSO for solving the various constrained test problems are compared with a number of established and newly invented metaheuristics, including an artificial bee colony algorithm, an ant colony algorithm, a cuckoo search algorithm, a salp swarm optimization algorithm, a grasshopper optimization algorithm, a mine blast algorithm, an ant lion optimizer, a gravitational search algorithm, a multi-verse optimizer, a Harris hawks optimization algorithm, and the original Henry gas solubility optimization algorithm. The results indicate that with selecting an appropriate chaotic map, the CHGSO is a robust optimization approach for obtaining the optimal variables in mechanical design and manufacturing optimization problems.

     

Modeling and control of a finger-like mechanism using bending shape memory alloys

Microsystem Technologies - In this research a biologically inspired finger-like mechanism similar to human musculoskeletal system is developed based on Shape Memory Alloys (SMAs). SMA actuators are...     

Selective chaotic maps Tiki-Taka algorithm for the S-box generation and optimization

Neural Computing and Applications - Cryptography often involves substituting (and converting) the secret information into dummy data so that it could reach the desired destination without leakage....