Prolonged tamoxifen exposure selects a breast cancer cell clone that is stable in vitro and in vivo

The effects of long-term tamoxifen exposure on cell growth and cell cycle kinetics were compared between oestrogen receptor (ER)-positive (MCF-7) and ER-negative (MDA-MB-231) cell lines. In the MCF-7 cell line, prolonged tamoxifen exposure (0.5 mumol/l for > 100 days) blocked cells in G0-G1 of the cell cycle, and slowed the doubling time of cells from 30 to 59 h. These effects corresponded to an increase in the cellular accumulation of tamoxifen over time [mean area under concentration curve (AUC) = 77.92 mumoles/10(6)/cells/day]. In contrast, in the MDA-MB-231 cell line, long-term tamoxifen exposure had no obvious effect on the doubling time, and reduced cellular tamoxifen accumulation (mean AUC = 50.50 mumoles/10(6)/cells/day) compared to the MCF-7 cells. Flow cytometric analysis of MDA-MB-231 cells demonstrated that a new tetraploid clone emerged following 56 days of tamoxifen exposure. Inoculation of the MDA-MB-231 tetraploid clone and MDA-MB-231 wildtype cells into the opposite flanks of athymic nude mice resulted in the rapid growth of tetraploid tumours. The tetraploid tumours maintained their ploidy following tamoxifen treatment for nine consecutive serial transplantations. Histological examination of the fifth transplant generation xenografts revealed that the tetraploid tumour had a 25-30 times greater mass, area of haemorrhage and necrosis, a slightly higher mitotic index and was more anaplastic than the control neoplasm. The control wildtype MDA-MB-231 tumours maintained a stable ploidy following tamoxifen treatment until the eighth and ninth transplantation, when a tetraploid population appeared, suggesting that tamoxifen treatment may select for this clone in vivo. These studies suggest that prolonged tamoxifen exposure may select for new, stable, fast growing cell clones in vitro as well as in vivo.     

Critical slowing down in lead magnesium niobate–zirconate ceramic

Dielectric relaxation behaviour of (1 − x)PMN − xPZ, for x = 0.10, 0.30 and 0.40 have been studied. The nature of relaxational behaviour was found to change with PZ concentration. A crossover from a static freezing to critical slowing down like behaviour is observed with increase in Zr⁴⁺ concentration. We have used Glazounov and Tangastev criterion to distinguish freezing and critical slowing down like behaviour.     

Lean philosophy: implementation in a forging company

This research addresses the implementation of lean philosophy in a forging company with a focus on radial forging production flow lines. Here, the prime motive is to evolve and test several strategies to eliminate waste on the shop floor. In this research, a systematic approach is suggested for the implementation of lean principles. This paper describes an application of value stream mapping (VSM). Consequently, the present and future states of value stream maps are constructed to improve the production process by identifying waste and its sources. Furthermore, Taguchi’s method of design of experiments is pursued here to minimize the forging defects produced due to imperfect operating conditions. A noticeable reduction in set-up time and work-in-process (WIP) inventory level is substantiated. Finally, we conclude with a discussion of managerial implications and the future scope of research.     

Solution-Processed n-Type Organic Field-Effect Transistors With High on /off Current Ratios Based on Fullerene Derivatives

Solution-processed n-type organic field-effect transistors (OFETs) based on the fullerene derivative {6}-1-(3-(2- thienylethoxycarbonyl)-propyl)-{5}-l-phenyl-[5,6]-C61 (TEPP) and phenyl-C61-butyric acid methyl ester (PCBM) in a multiring source/drain structure are reported. Devices with TEPP show high electron mobility up to 7.8 x 10^-2 cm²/Vs in the saturation regime for bottom-contact OFETs with Au S/D electrodes with a solution-processed fullerene derivative. The ON/OFF ratios reported in this letter, which are in the range of 10⁵ -10⁶, are among the highest values reported for such devices. This mobility is always higher compared to PCBM devices prepared in identical conditions. The mobility of TEPP and PCBM increased with increasing temperatures in the range of 100-300 K with activation energy of 78 and 113 meV, respectively, which suggests that the thermally activated hopping of electrons is dominant in TEPP.     

Genetic definition of a new bovine papillomavirus type 1 open reading frame, E5B, that encodes a hydrophobic protein involved in altering host-cell protein processing

We have previously observed that bovine papillomavirus type 1 (BPV-1) induces the appearance of five cellular proteins in C127 mouse fibroblasts, four of which appear to arise by altered processing of resident endoplasmic reticulum proteins. Studies of various cell lines revealed that expression of the 3' end of the BPV early region was sufficient for induction of these changes. To identify the BPV gene responsible, we have utilized the simian virus 40 (SV40)/BPV-1 recombinant virus Pava-1, which expresses the 3' end of the BPV early region behind an SV40 early promoter. C127 cells infected with Pava-1 for 48 h show the expected BPV-associated alterations, as do cells infected with Pava constructs mutated in the E5 or E2 genes. However, a mutation in the start codon of a previously ignored open reading frame extending from nucleotides 4013 to 4170 (E5B) eliminated the BPV-associated changes. Similar results were obtained with COS cells infected with the Pava mutants and C127 cells transformed by full-length mutated BPV. Despite its influence on the processing of cellular endoplasmic reticulum proteins, this mutation in E5B did not alter BPV-transforming efficiency or the ability of transformants to form colonies in soft agar. The E5B open reading frame encodes a hydrophobic 52-amino-acid polypeptide that shares structural similarities with HPV6 E5A and HPV16 E5. Speculations on a role for E5B in the viral life cycle are discussed.     

A unique method for reducing losses of bends in dielectric optical wave guide

The dielectric optical wave guide is finding growing attention at millimeter wave frequencies. However the dielectric optical waveguide radiates at bends and thus transmission loss increases. These radiations are in the outword direction of bends. This output radiation at output bends arises due to change in phase velocities of the propagating wave at the centre of the dielectric guide and the phase velocity at the outer surface of the dielectric guide. A unique methiod is suggested to avoid these radiation losses.Experimental results are also shown at microwave frequencies.     

Health education lessons learned: the H.A.P.I. Kids Program

Challenges exist for effective health communication and health education within diverse populations of the United States. This article addresses the development process for educational materials and lessons learned from the Healthy Asian and Pacific Islander (H.A.P.I.) Kids Program, a vaccination demonstration project funded by the Centers for Disease Control and Prevention to promote catch-up hepatitis B vaccination for older American Asian and Pacific Islander children. Simplicity and a common message were incorporated in multiple strategies to disseminate information to a diverse population. Community representatives from the Cambodian, Hmong, Filipino, Lao, and Vietnamese communities were instrumental in the material development process, which included needs assessment, design, and translation. By making the target community part of the development process, important health messages can be disseminated effectively, carrying great impact to an otherwise hard-to-reach community.     

Countercurrent water-heating system with a heat exchanger in a solar energy collector loop

The counter current heat exchanger theory with periodic inlet temperatures has been applied to analyze the thermal performance of a water heating system. The theoretical results obtained are in agreement with the experimental data reported in the literature.