Variable frequency drives for commercial laundry machines

Variable-speed AC drives have a well-founded reputation for versatility and dependability, with many features and benefits that are just not available from other drive technologies. They are presently used in applications ranging from simple fan control to complex operations including process loops, positioning and indexing, and industrial laundry applications. The author briefly discusses variable frequency drives (VFD) theory and pulse width modulation. The author then describes a cost-effective VFD which is available for use on commercial laundry machines. It offers the latest in IGBT technology, the application-specific intelligent power module (ASIPM). This module eliminates control components normally associated with transistor firing schemes. All components are embedded in the ASIPM module. It can be used with both singleand three-phase input power, and voltages from 190 to 480 V. Control logic is stored in one application-specific IC and is user-addressable to allow programming for special requirements. Wash formulas, unbalance detection, and cycle times can all be programmed directly into the VFD software, eliminating the need for timers, microprocessors, etc     

A multimodal hand-based verification system with an aliveness-detection module

This paper presents a multimodal biometrie verification system based on the following hand features: palmprint, four digitprints and four fingerprints. The features are obtained using the Karhunen-Loève transform based approach, and information fusion at the matching-score level was applied. We experimented with different resolutions of the regions of interest, different numbers of features and several normalization and fusion techniques at the matching-score level. To increase the reliability of the system to spoof attacks we included an aliveness-detection module based on thermal images of the hand dor sa. The verification performance when using a system configuration with optimum parameters, i.e., resolution, number of features, normalization and fusion technique, showed an equal error rate (EER) of 0.0020%, which makes the system appropriate for the implementation of high-security biometric systems.     

An OpenCL library for parallel random number generators

The Journal of Supercomputing - We present a library of 22 pseudo-random number generators on the GPU. The library is implemented in OpenCL and all generators are tested using the TestU01 and...     

Mechanochemical reaction in the K2CO3–Nb2O5 system

We studied the mechanochemical synthesis of KNbO₃, starting from a powder mixture of K₂CO₃ and Nb₂O₅. The milling experiments were designed with different ball-impact energies in order to investigate the mechanochemical reactions. X-ray diffraction, thermogravimetric analysis, infrared spectroscopy, Raman spectroscopy and transmission electron microscopy were used to characterize the samples. Based on the results, we propose a mechanism for the mechanochemical reaction between K₂CO₃ and Nb₂O₅. The first stage of the reaction is characterized by the formation of an amorphous carbonato complex, which decomposes after prolonged milling at higher ball-impact energy giving rise to the crystallization of KNbO₃ and other niobate phases with a molar ratio K/Nb < 1. The reaction course is discussed and compared with the Na₂CO₃–Nb₂O₅ system.     

Simulation of Fuzzy-Logic-Based Intelligent Wheelchair Control System

Fuzzy logic control system for an intelligent wheelchair aimed for assistance by the severely handicapped persons is presented in the paper. It is based on a computer simulation of wheelchair navigation, in which fuzzy logic enables control priority to smoothly alternate between manual and automatic control of the wheelchair in the vicinity of obstacles. The main purpose of designing and simulating this control approach is to improve the safety of a wheelchair in the presence of obstacles. To analyze the success of the wheelchair control, a dynamic model of the wheelchair, together with the models of distance sensors, has been developed using Lagrange analysis.     

Is the analysis of molecular electronic structure of corrosion inhibitors sufficient to predict the trend of their inhibition performance

The often used approach in the corrosion inhibition studies employing quantum chemical calculations that relies on the correlation between molecular electronic structure parameters and inhibition effectiveness is critically examined. It is shown that the inhibition performance of three selected triazole-based corrosion inhibitors for copper - 3-amino-1,2,4-triazole (ATA), benzotriazole (BTAH), and 1-hydroxybenzotriazole (BTAOH) - cannot be explained on this basis in a sound manner. As the effectiveness of inhibitors is due to several phenomena, the outcome depends on the interplay between them and although molecular electronic parameters may provide many necessary elements, the involved effects can be estimated only approximately which may not always suffice. This supports the proposition that in general molecular electronic properties cannot be directly related to inhibition effectiveness - the actual relation is more involved - thus emphasizing the importance of a rigorous modeling of the inhibitor-surface interaction in the corrosion inhibition studies.     

Two-Phase Heat Sinks with Microporous Coating

To minimize flow boiling instabilities in two-phase heat sinks, two different types of microporous coatings were developed and applied on mini- and small-channel heat sinks and tested using degassed R245fa refrigerant. The first coating was epoxy based and was sprayed on heat sink channels, while the second coating was formed by sintering copper particles on heat sink channels. Minichannel heat sinks had overall dimensions 25.4 mm × 25.4 mm × 6.4 mm and 12 rectangular channels with a hydraulic diameter 1.7 mm and a channel aspect ratio of 2.7. Small-channel heat sinks had the same overall dimensions, but only three rectangular channels with hydraulic diameter 4.1 mm and channel aspect ratio 0.6. The microporous coatings were found to minimize parallel channel instabilities for minichannel heat sinks and to reduce the amplitude of heat sink base temperature oscillations from ～6°C to slightly more than 1°C. No increase in pressure drop or pumping power due to the microporous coating was measured. The minichannel heat sinks with porous coating had on average 1.5 times higher heat transfer coefficient than uncoated heat sinks. Also, the small-channel heat sinks with the “best” porous coating had on average 2.5 times higher heat transfer coefficient and the critical heat flux was 1.5 to 2 times higher compared with the uncoated heat sinks.     

High hardness cubic boron nitride with nanograin microstructure produced by high‐energy milling

High‐energy shaker milling of hexagonal boron nitride (hBN) powders was used to produce powders rich in sp³ bonding. The powders contained up to 68% sp³ bonding and were found to nucleate nanosize cBN grains during consolidation at 5.5 GPa and 1400°C. The effect of hBN starting particle size, milling time, and powder‐to‐milling ball ratio were studied. The amount of sp³ bonding for milled hBN powders was determined, using ¹¹B solid‐state NMR. The milled material was also analyzed by XRD, Raman spectroscopy, and HRTEM. The results indicate that the material has a nanosized microstructure comprised of a disordered hBN matrix and cBN nuclei in the form of sp³‐rich domains. Eight different milled powders were produced and consolidated at pressures of either 5.5 or 6.5 GPa and temperatures of either 1400°C or 1450°C into 12 mm diameter and 5 mm thick pellets. Consolidated pellets formed from milled hBN with 68% sp³ bonding had Vickers hardness of 42 ± 1 GPa and fracture toughness 3.8 ± 0.1 MPa.m^1/2. Vickers hardness of 49 ± 1 GPa and fracture toughness of 4.6 ± 0.1 MPa.m^1/2 was achieved with a precursor that contained milled hBN and 50 vol. % of 0.5 μm diameter cBN crystals.     

In situ study of electric-field-induced ferroelectric and antiferromagnetic domain switching in polycrystalline BiFeO3

Antiferromagnetic domain switching induced by ferroelectric polarization switching has previously been observed in situ in both multiferroic BiFeO₃ single crystals and thin films. Despite a number of reports on macroscopic magnetoelectric measurements on polycrystalline BiFeO₃, direct in situ observation of electric-field-induced antiferromagnetic domain switching in this material has not been addressed due to the lack of high-quality samples capable of electrical poling. Here, the electric field control of antiferromagnetic domain texture is identified in polycrystalline BiFeO₃ using in situ neutron diffraction, showing the resultant magnetic domain reorientation induced by an electric field. An antiferromagnetic domain reorientation to a value of 2.2-2.5 multiples of a random distribution (MRD) is found to be induced by an electric field that provides a non-180° ferroelectric-ferroelastic domain texture of 2.2-2.5 MRD along the field direction. The current results show well-controlled coupling of multiferroic domain texturing in single-phase polycrystalline BiFeO₃.