Net glutamate release from astrocytes is not induced by extracellular potassium concentrations attainable in brain

Elevated extracellular potassium concentration ([K+]e) has been shown to induce reversal of glial Na+-dependent glutamate uptake in whole-cell patch clamp preparations. It is uncertain, however, whether elevated [K+]e similarly induces a net glutamate efflux from intact cells with a physiological intracellular milieu. To answer this question, astrocyte cultures prepared from rat and mouse cortices were incubated in medium with elevated [K+]e (by equimolar substitution of K+ for Na+), and glutamate accumulation was measured by HPLC. With [K+]e elevations to 60 mM, medium glutamate concentrations did not increase during incubation periods of 5-120 min. By contrast, 45 min of combined inhibition of glycolytic and oxidative ATP production increased medium glutamate concentrations 50-100-fold. Similar results were obtained in both rat and mouse cultures. Studies were also performed using astrocytes loaded with the nonmetabolized glutamate tracer D-aspartate, and parallel results were obtained; no increase in medium D-aspartate content resulted from [K+]e elevation up to 90 mM, whereas a large increase occurred during inhibition of energy metabolism. These results suggest that a net efflux of glutamate from intact astrocytes is not induced by any [K+]e attainable in brain.     

Effects of aging and schedules of knowledge of results on motor learning

Little research has been conducted on aging and the learning of motor skills. In this study, we examined the effects of different schedules of knowledge of results (KR) on the acquisition and retention of a movement timing task by young adults (20-23 years) and older adults (60-82 years). The results indicated that there were differences between young and older adults in the accuracy and consistency of motor performance when KR was provided. Accuracy effects persisted during a retention interval when KR was no longer provided, although there were no differences in variability. There were no interactions of age with any of the KR-related variables. These findings suggest that the ability to process KR, and the effects of KR on motor learning, are similar in young and older adults. These findings are discussed in terms of age-related issues in movement control and learning processes.     

Aldosterone and dexamethasone stimulate calcineurin activity through a transcription-independent mechanism involving steroid receptor-associated heat shock proteins

1. PD 81,723 has been shown to enhance binding of adenosine to A1 receptors by stabilizing G protein-receptor coupling ('allosteric enhancement'). Evidence has been provided that in the perfused hearts and isolated atria PD 81,723 causes a sensitization to adenosine via this mechanism. 2. We have studied the effect of PD 81,723 in guinea-pig isolated atrial myocytes by use of whole-cell measurement of the muscarinic K+ current (I[K(ACh)]) activated by different Gi-coupled receptors (A1, M2, sphingolipid). PD 81,273 caused inhibition of I[K(ACh)] (IC50 approximately 5 microM) activated by either of the three receptors. Receptor-independent I[K(ACh)] in cells loaded with GTP-gamma-S and background I[K(ACh)], which contributes to the resting conductance of atrial myocytes, were equally sensitive to PD 81,723. At no combination of concentrations of adenosine and PD 81,723 could an enhancing effect be detected. 3. The compound was active from the outside only. Loading of the cells with PD 81,723 (50 microM) via the patch pipette did not affect either I[K(ACh)] or its sensitivity to adenosine. We suggest that PD 81,723 acts as an inhibitor of inward rectifying K+ channels; this is supported by the finding that ventricular I(K1), which shares a large degree of homology with the proteins (GIRK1/GIRK4) forming I[K(ACh)] but is not G protein-gated, was also blocked by this compound. 4. It is concluded that the functional effects of PD 81,723 described in the literature are not mediated by the A1 adenosine receptor-Gi-I[K(ACh)] pathway.     

Mechanisms involved in the intrinsic isoniazid resistance of Mycobacterium avium

Isoniazid (INH), which acts by inhibiting mycolic acid biosynthesis, is very potent against the tuberculous mycobacteria. It is about 100-fold less effective against Mycobacterium avium. This difference has often been attributed to a decreased permeability of the cell wall. We measured the rate of conversion of radiolabelled INH to 4-pyridylmethanol by whole cells and cell-free extracts and estimated the permeability barrier imposed by the cell wall to INH influx in Mycobacterium tuberculosis and M. avium. There was no significant difference in the relative permeability to INH between these two species. However, the total conversion rate in M. tuberculosis was found to be four times greater. Examination of in vitro-generated mutants revealed that the major resistance mechanism for both species is loss of the catalase-peroxidase KatG. Analysis of lipid and protein biosynthetic profiles demonstrated that the molecular target of activated INH was identical for both species. M. avium, however, formed colonies at INH concentrations inhibitory for mycolic acid biosynthesis. These mycolate-deficient M. avium exhibited altered colony morphologies, modified cell wall ultrastructure and were 10-fold more sensitive to treatment with hydrophobic antibiotics, such as rifampin. These findings may significantly impact the design of new therapeutic regimens for the treatment of infections with atypical mycobacteria.     

High-Performance Multilayer Capacitor Dielectrics from Chemically Prepared Powders

Advantages of chemically prepared powders for electronic ceramics have been demonstrated for a number of multilayer capacitor (MLC) dielectrics. A cost-efficient precipitation process was developed to produce undoped or doped crystalline barium titanate powder with a narrow particle size distribution close to 0.5 μm. More complex compositions, e.g., barium-neodymium titanate, were amorphous as precipitated but could be crystallized by calcination below 1000°C. Additional compositional modifications, to adjust electrical properties or to lower sintering temperature, were accomplished by doping the surface of the powder particles using a solution coating process. Exceptional fired densities and electrical performance were obtained.     

Skin and layer formation in films prepared from carbohydrates,poly(ethylene-co-acrylic acid), and polyethylene

Cornstarch, a canary dextrin, and a maltodextrin were compared in films blown from carbohydrates compounded with poly(ethylene-co-acrylic acid) (EAA), low-density polyethylene (LDPE), and aqueous ammonium hydroxide plasticizer. Dextrins or maltodextrins having dextrose equivalent values of one and greater caused dark-colored films with caramel odors, probably due to Maillard reactions. Blown films with hydrophobic skins and water sensitive cores were produced with the dextrinized carbohydrates, but not from natural cornstarch. Water sensitivity of films containing the dextrinized carbohydrate was reduced by recycling the films through the blown film die. A mechanism for development of the skins is proposed, as is a method for preparing thin semipermeable membranes. © 1993 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America.

     

Inactivating microorganisms using a pulsed electric fieldcontinuous treatment system

High-voltage pulsed electric fields (PEFs) can be used to inactivate microorganisms in liquids. Applying PEF technology to food pasteurization is a promising nonthermal method, which may radically change food preservation processes and provide consumers with microbiologically safe, minimally processed, fresh-like products. A continuous-flow system in a laboratory-size prototype was constructed for the nonthermal pasteurization of liquid foods with PEF technology. Major components in the prototype include a high-voltage repetitive pulse generator, a coaxial liquid food treatment chamber, a fiber-optic temperature sensing instrument and a data acquisition system. Microbial inactivation tests were conducted in the continuous PEF treatment system. Repetitive high-voltage pulses with an exponential decaying waveshape were applied to the liquid food which was pumped through the treatment chamber. Test microorganisms selected for inactivation were Escherichia coli, Staphylococcus aureus and Saccharomyces cerevisiae. Over 6-order-of-magnitude reductions in the viability of selected microorganisms were achieved while the food temperature was maintained below 40°C     

Coherent lidar airborne wind sensor II: flight-test results at 2 and 10 νm

The use of airborne laser radar (lidar) to measure wind velocities and to detect turbulence in front of an aircraft in real time can significantly increase fuel efficiency, flight safety, and terminal area capacity. We describe the flight-test results for two coherent lidar airborne shear sensor (CLASS) systems and discuss their agreement with our theoretical simulations. The 10.6-μm CO(2) system (CLASS-10) is a flying brassboard; the 2.02-μm Tm:YAG solid-state system (CLASS-2) is configured in a rugged, light-weight, high-performance package. Both lidars have shown a wind measurement accuracy of better than 1 m/s.     

Overview of a Modal-Based Condition Assessment Procedure

Condition assessment is a term that is used to describe the process of characterizing the physical condition of constructed systems. This paper summarizes a condition assessment (CA) procedure based on a complete system of field-testing, finite element (FE) modeling, and load rating. Experimental techniques, including both modal testing and truckload testing, are used to collect measurements of the constructed systems. The basic mechanism and procedure of the FE modeling and calibration are presented. Different physical parameters of FE models are adjusted during the calibration process using both static and dynamic responses as criteria to achieve convergence between experimental measurements and analytical results using carefully developed objective functions. Finally, a bridge load rating is completed on the basis of the calibrated model. These developments are described and illustrated using a representative bridge as an example.