Platinum Binuclear Complexes as Phosphorescent Dopants for Monochromatic and White Organic Light‐Emitting Diodes

Efficient blue‐, green‐, and red‐light‐emitting organic diodes are fabricated using binuclear platinum complexes as phosphorescent dopants. The series of complexes used here have pyrazolate bridging ligands and the general formula C^∧NPt(μ‐pz)₂PtC^∧N (where C^∧N = 2‐(4′,6′‐difluorophenyl)pyridinato‐N,C^2′, pz = pyrazole ( 1 ), 3‐methyl‐5‐tert‐butylpyrazole ( 2 ), and 3,5‐bis(tert‐butyl)pyrazole ( 3 )). The Pt–Pt distance in the complexes, which decreases in the order 1 > 2 > 3 , solely determines the electroluminescence color of the organic light‐emitting diodes (OLEDs). Blue OLEDs fabricated using 8 % 1 doped into a 3,5‐bis(N‐carbazolyl)benzene (mCP) host have a quantum efficiency of 4.3 % at 120 Cd m^–2, a brightness of 3900 Cd m^–2 at 12 V, and Commission Internationale de L'Eclairage (CIE) coordinates of (0.11, 0.24). Green and red OLEDs fabricated with 2 and 3 , respectively, also give high quantum efficiencies (～ 6.7 %), with CIE coordinates of (0.31, 0.63) and (0.59, 0.46), respectively. The current‐density–voltage characteristics of devices made using dopants 2 and 3 indicate that hole trapping is enhanced by short Pt–Pt distances (< 3.1 Å). Blue electrophosphorescence is achieved by taking advantage of the binuclear molecular geometry in order to suppress dopant intermolecular interactions. No evidence of low‐energy emission from aggregate states is observed in OLEDs made with 50 % 1 doped into mCP. OLEDs made using 100 % 1 as an emissive layer display red luminescence, which is believed to originate from distorted complexes with compressed Pt–Pt separations located in defect sites within the neat film. White OLEDs are fabricated using 1 and 3 in three different device architectures, either with one or two dopants in dual emissive layers or both dopants in a single emissive layer. All the white OLEDs have high quantum efficiency (～ 5 %) and brightness (～ 600 Cd m^–2 at 10 V).     

The Role of the γ/ γeutectic and porosity on the tensile behavior of a single-crystal nickel-base superalloy

The microstructure of a single-crystal nickel-base superalloy, PWA 1480, has been varied by heat treatment and hot isostatic pressing in order to study the role of the γ/yγ′ eutectic and porosity on subsequent tensile behavior. The level of porosity was found not to affect any of the tensile properties, while the γ/γ′ eutectic strongly influenced ductility. Eliminating the γ/γ′ eutectic increased ductility which was attributed to the cleavage fracture of this constituent. It is proposed that such cleavage of the γ/γ′ eutectic is initiated by the stress created from impinging slip bands, promoting shear localization, and final fracture along {111} slip planes. The precise nature of this fracture process is discussed with emphasis on the role of the γ/′ micro-structure. The deformation structure of PWA 1480 was also studied, and while different in some respects from many other single-crystal superalloys, its fracture process appears to be similar. Formerly Graduate Student, Department of Metallurgical Engineering and Materials Science, Carnegie Mellon University.     

Thermoelectric properties of BiSb alloys

Bismuth is a semimetal that has a relatively low lattice thermal conductivity. A positive energy gap can be created by alloying with antimony, leading to useful alloys for thermoelectric energy conversion. This paper gives an insight into the basic properties of BiSb alloys for thermoelectric applications.     

Enhancing echo cancellation via estimation of delay

The advent of packetized audio transmission, such as voice over IP (VoIP), has resulted in challenging requirements for echo cancellation technology. One key aspect of this technology is the need to characterize, quickly and accurately, the echo paths in the transmission media. Echo paths consist of a constant time delay with no echo signal and active regions in which the echo signal is present. When an adaptive filter echo cancellation algorithm is used, its performance can be greatly increased, and its complexity can be reduced if it is only applied to the active regions. This requires an algorithm to estimate the constant delay and locate the active regions. Traditionally, delay estimation has been based on direct application of cross-correlation. This method has poor performance because the input signals are highly correlated and has a high implementation cost because many cross-correlation lags have to be computed for longer time delays. The delay estimation addressed in this paper has two major advantages over the traditional methods. The first is that it has improved performance because the input signals are processed to have less correlation. The second is that the implementation cost is significantly reduced because fewer cross-correlation lags are computed, and an efficient method to estimate lags is created.     

Undergraduate software engineering education: the mark of a discipline

Undergraduate software engineering education is now well established in many countries, and many of these degree programs have received formal accreditation by the relevant country's professional body for computing. SE 2004 represents an enormous effort by numerous individuals across the discipline. Its quality has been clearly recognized by the sponsoring organizations. The developmental team confidently looks forward to the volume's use and to your participation in future evaluations and in the next phase of development. The volume provides usable results for those in emerging economies who wish to enter the software engineering community, and we know that individual project members and the participating national bodies are ready to assist.     

智能功率控制产品的设计

构建和维护合适的功率环境对系统的正确运行非常关键。对功率的控制和管理越来越受到重视，无论是简单的手持式便携设备，还是多服务器机架系统，都希望能够节省能耗、降低成本。