Beneficial effects of wettability altering surfactants in oil-wet fractured reservoirs

In fractured reservoirs, an effective matrix-fracture mass transfer is required for oil recovery. Surfactants have long been considered for oil recovery enhancement, mainly in terms of their ability to reduce oil–water interfacial tension. These surfactants are effective when the fractured formations are water-wet, where capillary imbibition of surfactants from the fracture into the matrix contributes to oil recovery. However, another beneficial aspect of surfactants, namely their ability to alter wettability, remains to be explored and exploited. Surfactants capable of altering wettability can be especially beneficial in oil-wet fractured formations, where the surfactant in the fracture diffuses into the matrix and alters the wettability, enabling imbibition of even more surfactant into the matrix. This sequential process of initial diffusion followed by imbibition continues well into the matrix yielding significant enhancements in oil recovery.In order to test this hypothesis of sequential diffusion–imbibition phenomenon, Dual-Drop Dual-Crystal (DDDC) contact angle experiments have been conducted using fractured Yates dolomite reservoir fluids, two types of surfactants (nonionic and anionic) and dolomite rock substrates. A new experimental procedure was developed in which crude oil equilibrated with reservoir brine has been exposed to surfactant to simulate the matrix-fracture interactions in fractured reservoirs. This procedure enables the measurements of dynamic contact angles and oil–water interfacial tensions, in addition to providing the visual observations of the dynamic behavior of crude oil trapped in the rock matrix as it encounters the diffusing surfactant from the fractures. Both the measurements and visual observations indicate wettability alterations of the matrix surface from oil-wet to less oil-wet or intermediate wet by the surfactants. Thus this study is of practical importance to oil-wet fractured formations where surfactant-induced wettability alterations can result in significant oil recovery enhancements. In addition, this study has also identified the need to include contact angle term in the dimensionless Bond number formulations for better quantitative interpretation of rock–fluids interactions.     

Serum calcium, phosphate and alkaline phosphate levels in epileptic children treated with phenobarbitone

A longitudinal study to estimate the serum calcium, phosphate and alkaline phosphatase levels of 89 ambulatory epileptic children, aged between 3 years and 12 years, and having generalised tonic-clonic seizures, was carried out. None was on any form of medication for the treatment of seizures prior to presentation. Each patient received only phenobarbitone during the period of study. Serum levels of the biochemical parameters were determined at presentation, 6 months and 12 months, while serum phenobarbitone levels were estimated at 6 months and 12 months. Mean serum calcium, phosphate and alkaline phosphatase of the patients remained within the normal range. Using the paired 't' test, the differences in the levels of the parameters at the three measurements were not statistically significant (P > 0.05). Serum phenobarbitone levels remained within the therapeutic range during the period of study. Our results show that over a 12-month period, serum levels of calcium, phosphate, and alkaline phosphatase, remain normal in ambulant epileptic children treated with phenobarbitone.     

Preparation and characterization of chitosan‐based dispersions

Complexation of chitosan in aqueous solutions by low molecular weight electrolytes is one of the simplest methods for the preparation of aqueous chitosan dispersions. In this work, the influence of storage time, sulfate concentration, method of preparation and surfactant content on some properties of the resultant chitosan dispersions (turbidity, viscosity and zeta potential) was analyzed. Turbidimetry was adequate to monitor the formation of particles, while viscometry was suitable to monitor changes in the dispersing phase. An analysis of the properties of these systems, mainly in terms of particle–particle and macromolecule–macromolecule interactions was carried out. Copyright © 2004 Society of Chemical Industry     

In Situ Performance Testing of Deteriorating Water Tanks for Durability Assessment

Reports of failure of existing concrete structures due to a lack of durability, rather than a deficiency in structural strength, has made concrete technologists, engineers, and researchers focus research on the parameters influencing durability performance with respect to time. Systematic performance monitoring, with respect to chosen durability parameters of existing concrete structures, will decide the direction of future research in this area. Inferences based on laboratory simulations and testing need to be confirmed by in situ field measurements and studies. In situ condition rating and performance monitoring surveys have been conducted by many researchers, scientists, and professional associations, and reported in literature. Inferences of few such studies are summarized and discussed. Deterioration of concrete structures constructed in recent times is observed at relatively faster rates, and has been mainly attributed to cracking. Cracking is associated with the use of faster-hydrating portland cements with increased fineness and the tricalcium silicate (C3S) content to support the high speed of modern construction. In the present research, a case study of deteriorated water tank structures situated in the semitropical region of India is presented. Some selected parameters—such as concrete cover, carbonation depth, chloride concentration, compressive strength, etc. which influence long term durability of structures—have been measured.     

Supramedullary modulation of sympathetic vasomotor function

1. Supramedullary structures including the ventral medial prefrontal cortex (MPFC) and the midbrain cuneiform nucleus (CnF) project directly and indirectly to premotor sympatho-excitatory neurons of the rostral ventrolateral medulla (RVLM) that are critically involved in the generation of sympathetic vasomotor tone. 2. Electrophysiological studies have demonstrated that activation of depressor sites within the MPFC is associated with splanchnic sympathetic vasomotor inhibition and inhibition of the activity of RVLM sympathoexcitatory neurons. 3. Antidromic mapping and anatomical studies support the notion that a relay in the nucleus tractus solitarius is involved in the cardiovascular response to MPFC stimulation. 4. The midbrain CnF, which lies adjacent to the midbrain periaqueductal grey, is a sympathoexcitatory region of the midbrain reticular formation. Sympathoexcitatory responses evoked from the CnF are associated with short-latency excitation of RVLM neurons. 5. Cuneiform nucleus stimulation induces the expression of mRNA for the immediate early genes c-fos and NGFI-A in mid-brain, pontine and hypothalamic structures. 6. The MPFC and CnF are supramedullary structures with opposing modulatory influences on sympathetic vasomotor drive, whose roles in cardiovascular control mechanisms warrant further investigation.     

Use of the polymerase chain reaction in the diagnosis of leprosy

A case is described in which a pericardial branch of a nongrafted left internal mammary artery communicated directly with the distal left anterior descending artery, following saphenous vein bypass grafting. This type of collateralization following coronary artery bypass surgery seems to be very rare, and perhaps could protect the myocardium from severe ischemia.     

Cloning and expression of an endo-1,3-1,4-beta-glucanase gene from Bacillus macerans in Lactobacillus reuteri

Strains of the gastrointestinal species Lactobacillus reuteri were electrotransformed with plasmid constructs containing the endo-1,3-1,4-beta-glucanase gene (bglM) of Bacillus macerans. The enzyme was expressed and secreted by the lactobacilli. A plasmid construct containing the bglM gene lacking its promoter was derived and was demonstrated to be useful as a promoter probe vector.     

Dynamic thermographic imaging for estimation of regional perfusion in the tuberculin reaction in healthy adults

A sensitive method for measurement of the volume of blood flow through the skin, based on the kinetics of reheating after localised cooling, is described in this paper. This method has been used to study the tuberculin reaction as a model of cutaneous delayed-type hypersensitivity (DHS) in man. Over the positive reaction there is accelerated reheating similar in kinetics and extent to that seen after maximal hyperaemia induced by intradermal injection of histamine or prostaglandin E2. The earlier phase of reheating (10-100 s) is more dependent on blood flow, whereas the later phase (100-300 s) is apparently more dependent on non-perfusion heat exchange mechanisms, including conduction. The reheat kinetic method is largely dependent on blood flow in the deep dermal vessels (diameter > 50 microns), whereas the alternative approach of measurement of the velocity of flow of erythrocytes in the microcirculation by laser Doppler (LD) flowmetry gives results biased towards the most superficial dermal circulation. Previous studies with LD flowmetry have shown that the blood velocity is greatest at the centre of weak and strong reactions, while in the most intense reactions it is raised at the centre but maximal at the periphery (central relative slowing, CRS) raising the possibility of central ischaemia. The reheat kinetics approach has now indicated that the deep dermal circulation is not impaired in CRS reactions. It is concluded that there must be partial obstruction of the parts of the microcirculation communicating between the deep and superficial dermal plexuses, presumably from the accumulation of exudate oedema in the most intense tuberculin reactions.     

Reaction of zirconium fluoride glass with water: kinetics of dissolution

When liquid water contacts a zirconium-barium-lanthanum fluoride glass, at least three different processes occur. Barium and zirconium fluoride dissolve into the water, water penetrates into the glass, and zirconium fluoride crystals grow on the glass surface, in static solution. The rate of dissolution, as measured by solution analysis, is possibly controlled by diffusion in the solid surface; surface blockage and surface reactions are other possible kinetic steps involved. Diffusion in solution is not the controlling mechanism. Hydrogen profiles in the glass surface suggest that the penetration rate of water into the glass is controlled by diffusion and a surface reaction.