数字式速度比例同步电脑控制系统

数字式速度比例同步控制系统，是把先进的交流变频调速技术，微电子技术和节能效果显著的永磁同步电机融为一体组成的性能优良的调速控制系统。该系统具有调速精度高调整范围大、稳定性好、抗干扰能力强、调整方便、节电效果显著等一系列优点。本文详细介绍了该系统的工作原理，并通过应用实例和分析对比，阐述该系统的优越性。     

Spectral estimation of video signals

Spectrum analyzers are ubiquitous in laboratory work concerning one dimensional signals. This is because linear operators are best examined in the frequency domain. Linear operators, such as linear filters, DCT coders, line shufflers, etc., dominate also the video systems scenario. Their frequency domain study is as appropriate and informative as it is in the case of their one-dimensional counterparts. This paper considers the problems associated with the introduction of two well-known spectral estimation techniques, the periodogram and AR estimates, to the context of television signals. The potential for application of spectral estimation to video problems is exemplified by a number of applications related to the fields of enhanced quality television and HDTV. Special attention is paid to the computational aspects, whose effective solution conditions the practical applicability of the proposed spectral estimation techniques.R. Rinaldo is currently at the Department of Electrical and Computer Engineering of the University of California, Berkeley.     

调速控制的轴流式通风机最小能耗运行条件的研究

针对轴流式通风机调速节能的问题 ,从通风机全压方程入手 ,利用最优控制原理 ,推导出了调速控制的轴流式通风机最小能耗运行条件 ,为此类通风机调速节能运行提供了理论依据     

对《机械制图》课程教学的几点探索

从如何激发学生的学习兴趣,提高制图教学的课堂教学效果入手,试图解决有限的教学时数与快速膨胀的教学内容之间的矛盾,从而达到提高教学质量的目的。     

Preparation of V doped lanthanum silicate electrolyte ceramics by combustion method and study on conductance mechanism

Vanadium doped La_9.33Si_6−xV_xO_26+0.5x (x = 0.5, 1.0, 1.5) (LSVO) electrolyte powder was prepared by combustion method at 600°C for 5-7 min. The powder was sintered at 1500°C for 3 hours to prepare LSVO ceramics. XPS, IR, XRD, and EIS analysis show that V⁵⁺ doping replaces Si⁴⁺ in [SiO₄] to form [Si(V)O₄] tetrahedron. With the increase in x, the lattice volume increase. When x = 2.0, the LaVO₄ phase was formed, indicating that the limit doping amount of V⁵⁺ replacing Si⁴⁺ is x ≤ 1.5. The conductivity of LSVO increases significantly with the increase in x (x ≤ 1.0), which attributed to the defect reaction caused by V⁵⁺ doping. The addition of the interstitial oxygen Oi* in 6₃ channels and the increase of lattice volume leads to increased conductivity. When x = 1.0, the highest conductivity is 1.46 × 10⁻² S·cm⁻¹ (800°C). The doping enhancement conductivity mechanism is the Interstitial oxygen defect-Lattice volume composite enhancement mechanism.     

接枝梳型高分子的SCF理论模拟

利用Scheutjens—Fleer自洽场（SF—SCF）理论,对表面接枝梳型高分子的体系进行模拟研究。模拟结果表明,柔性梳型高分子主链的链段密度分布仅与支链的总链段数有关,主链随支链链段数目的增加而伸展。当总链段数一定且主链长度相同时,线性高分子表现出较高的接枝率,比接枝的梳型高分子具有更大的分子伸展程度与更厚的接枝层。对于线性高分子的接枝层,提高链长比提高接枝率能得到更厚的接枝层。     

Influence of forming method of blending versus casting layer-by-layer on structural properties and packing performances of casein-gelatin composite edible film under different appending proportion

In order to obtain casein edible films with great packing performance, gelatin as the reinforcing additive with different ratios were loaded via two methods including layer- by- layer and blending. A comparative study on structure properties between double layers and blending films made from casein and gelatin was obtained by scanning electron microscopy and Fourier transform infrared spectroscopy. The difference between the films' packing characters were conducted by water vapor permeability (WVP), optical property, and mechanical properties (including tensile strength (TS) and elongation (EAB)). The results showed that the degree of films roughness increased and the structural stability decreased as the increase of gelatin additive ratio in both double layers and blending films. Thickness and WVP both displayed a trend of increasing first then decreasing at the dividing of gelatin instead of casein in 50%. Importantly, WVP values in double layers film with a largest value of 6.95 gm⁻¹Pa⁻¹s⁻¹ was higher than blending films, observably (P < 0.05). Additionally, TS in blending film was increased by 23.44% than double layers film under the gelatin additive proportion of 70%, and EAB value in double layers film was larger by 207.65% than blending film under the gelatin additive proportion of 10%.     

机械合金化制备金属间化合物MoSi2

以Si粉和Mo粉为原料采用机械合金化的方法制备了金属间化合物MoSi2.研究了球磨过程中球磨时间、球料比、转速及不同球磨机类型对机械合金化产物的影响.利用SEM观察粉末表面形貌及颗粒大小,利用XRD测定物相结构.研究结果表明,当球磨机提供的能量达到相变所需的能量时,粉末中有MoSi2相生成.通过XRD分析可以看出,随着球磨时间的延长,合金化程度逐渐提高;球磨转速的提高有助于生成MoSi2;较高的球料比可以使生成MoSi2的时间提前.在机械球磨过程中,粉末的颗粒尺寸经历了一个由较粗且不规则、不均匀粉末向细小、均匀、接近球形粉末,然后团聚增大的转化过程.此外,还研究了助磨剂对合金化产物的影响,结果表明助磨剂的加入并不能促进MoSi2的生成,但可以对颗粒的细化起到一定作用.     

基于Outlook的支持BASE91编码邮件的实现

目前广泛采用的编码方法是Base64,其编码效率达到75%,而由何大可教授提出的一种新编码方法:Base91将进一步减少数据扩展率,使编码效率增加到81.25%.推广Base91在实际中使用,便可大大节省网络带宽.通过监控Outlook2003的发送流程,反汇编其关键文件,查找到与编码有关的函数地址,通过替换目标编码函数地址为Base91编码地址从而达到应用Base91编码的目的,开发出一个具有Base91编码功能的Outlook2003插件包.