Characterization of the Residence Time Distribution in Spray Dryers

In this work it is presented a study on the residence time distribution (RTD) of particles in a co-current pilot-plant spray dryer operated with a rotary atomization system. A nuclear technique is applied to investigate the RTD responses of spray dryers. The methodology is based on the injection of a radioisotope tracer in the feed stream followed by the monitoring of its concentration at the outlet stream. The experiments were performed during the drying of aqueous suspensions of gadolinium oxide. The RTD responses obtained experimentally presented good reproducibility, indicating that the technique applied is well suited to investigating fluid-dynamics of spray dryers. In addition to the experimental investigation, a mathematical model was used to describe the RTD experimental curves.     

600 A IGBT开关电路及其散热系统设计

采用IGBT开关电路，对大功率电阻带进行直流脉宽调制控制，实现了内燃机车大功率直流发电机负载实验中的负载大小的连续调节。为了避免在实验过程中IGBT器件的温度过高，采用独特的双管IGBT结构和双向强迫风冷的散热系统。实验表明该电路运行稳定、可靠。     

Finite-element analysis and experimental study on tensile fatigue behaviour of bitumen–stone adhesion

Tensile fatigue behaviours of bitumen–stone adhesion were investigated using a dynamic mechanics analyser under stress‐controlled mode at two temperatures of 5 and 25°C and various controlled‐stress levels. Failure characteristics including interfacial failure and cohesive failure were examined using image analysis of fracture surfaces. Finite‐element analysis on stress distributions was conducted under different temperatures, film thickness and interfacial bonding conditions. A Coulomb–Mohr like criterion in combination with shear and normal stresses is proposed to deal with the extreme thin adhesive layer, which can be further simplified into an adhesive zone without significant loss of accuracy for stress analysis.     

Three-dimensional fracture simulation with a single-domain,direct boundary element formulation

An efficient hypersingular boundary integral equation method for three-dimensional fracture mechanics was presented in a previous paper. The details of the numerical implementation of this method are further discussed herein. In particular, an algorithm for achieving the required differentiability of the crack surface displacement function is discussed. To illustrate the utility of the method, computational results for several strongly interacting multiple-crack geometries are presented. The calculated stress intensity factors are in excellent agreement with those obtained by an approximate analytical method due to Kachanov and Laures.     

Eradication of Barrett''s mucosa with argon plasma coagulation and acid suppression: immediate and mid term results

Microcapsules are used for the formulation of drug controlled release and drug targeting dosage forms. Encapsulated hydrophobic drugs are often applied as their solutions in plant oils. The uptake of the oils in the complex coacervate microcapsules can be improved by the addition of surfactants. In this study, soybean, olive and peanut oils were chosen as the representatives of plant oils. The well characterized complex coacervation of gelatin and acacia has been used to produce the microcapsules. The amount of encapsulated oil has been determined gravimetrically. The encapsulation of the oils was high (75-80%). When the surfactants with HLB values from 1.8 to 6.7 were used, the amount of encapsulated oil was high (65-85%). A significant decrease of the oil content in the microcapsules was found when Tween 61 with HLB = 9.6 had been added into the mixture. No oil was found inside the microcapsules from the coacervate emulsion mixture containing Tween 81 (HLB = 10) and Tween 80 (HLB = 15), respectively. The results of the experiment confirm the dependence of hydrophobic substance encapsulation on the HLB published recently for Squalan.     

降低氧化铝生产中熟料折合比的探讨

在氧化铝生产过程中，熟料折合比是烧结法一项重要的综合性指标，本文通过对熟料折合比的定义、计算公式的剖析，分析了生产过程中影响熟料折合比的主要因素，对有效降低熟料折合比的措施进行了探讨。     

清华屏蔽实验反应堆中子注量率能谱的调节和测量

叙述了采用多种屏蔽过滤方法,通过实验获得多种条件下的中子注量率能谱的调节和测量。     

基于PSOS的TM1300应用系统中的BSP研究

通过在应用软件与板级支持包BSP之间加一层库函数的方法较好地解决了应用程序与板级支持包函数间的通信问题，减少了板级支持包函数的维护复杂度，从而为嵌入式系统板级支持包的实现提供了一个有价值的思路。     

Wake and aerodynamics loads in multiple bodies—application to turbomachinery blade rows

Two-dimensional, unsteady flow around bodies of complex geometry (or multiple bodies) at high Reynolds number is simulated using the vortex method. This method is modified to take into account the sub-grid scale phenomena through a second order velocity structure function model adapted to the Lagrangian scheme. The dynamics of the body wake is computed using the convection-diffusion splitting algorithm; the convection process is carried out with a Lagrangian Adams-Bashforth time-marching scheme and the diffusion process is simulated using the random walk method. The pressure distribution is obtained using an integral equation derived from the pressure Poisson equation, which was first developed for a single body. Results for the numerical simulation around a linear cascade of airfoils are presented. As the flow is periodic in the y direction, the discrete vortex shedding need only be considered for a reference airfoil. The flow characteristics around the NACA 65-410 series airfoils are calculated and comparisons are made with results available in the literature.     

重视标准工作、强化标准管理是企业生存与发展的基础

本文论述了企业标准化工作的重要性及标准化工作需重视的几个方面。论述了采用国际先进标准及建全标准化管理体系的重要性。