Repair of extensive ionizing-radiation DNA damage at 95 degrees C in the hyperthermophilic archaeon Pyrococcus furiosus

We investigated the capacity of the hyperthermophile Pyrococcus furiosus for DNA repair by measuring survival at high levels of 60Co gamma-irradiation. The P. furiosus 2-Mb chromosome was fragmented into pieces ranging from 500 kb to shorter than 30 kb at a dose of 2,500 Gy and was fully restored upon incubation at 95 degrees C. We suggest that recombination repair could be an extremely active repair mechanism in P. furiosus and that it might be an important determinant of survival of hyperthermophiles at high temperatures.     

Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

Nondestructive evaluation of corrosion by fractal geometry

Fractal geometry is finding its application in the nondestructive evaluation (NDE) of corrosion by characterizing the corrosion surface with fractal dimensions. It was found that corrosion surfaces can be well described by multifractals. Two algorithms were used to obtain the fractal dimensions of a corroded aluminum alloy surface, one being box-counting and another being coherent light scattering. Fractal dimensions were related with the damage caused by corrosion and fatigue.     

Handwritten word recognition with character and inter-characterneural networks

An off-line handwritten word recognition system is described. Images of handwritten words are matched to lexicons of candidate strings. A word image is segmented into primitives. The best match between sequences of unions of primitives and a lexicon string is found using dynamic programming. Neural networks assign match scores between characters and segments. Two particularly unique features are that neural networks assign confidence that pairs of segments are compatible with character confidence assignments and that this confidence is integrated into the dynamic programming. Experimental results are provided on data from the U.S. Postal Service.     

Line balancing in a just-in-time production environment: balancing multiple U-lines

The introduction of multiple, independent production lines has helped many firms to increase their production flexibility, provide for redundancy when equipment breaks down, reduce idle time and labor costs, and achieve many other benefits. This paper introduces and formalizes the multiple U-line balancing problem. Optimal solution methodologies are provided for Type I (minimize the number of stations for a given cycle time), Type II (minimize the cycle time for a given number of stations), and cost-minimization line-balancing problems. A branch-and-bound algorithm is also developed for the situation in which equipment requirements are dependent on the line configuration and the task assignment to stations. Computational results indicate that the greatest benefit of exploiting multiple lines occurs for smaller cycle-time problems that require higher output.     

闪存器与移动电子设备

闪存器技术于上世纪80年代中期面世,在不到20年的时间里,就出现了迅猛增长,其应用范围从个人电脑的引导代码存储一直到近期出现的PDA、数码相机和手机中的代码和数据存储。随着移动电子的持续增长,我们对在移动电子中获得成功应用的闪存器功能和优点进行一次回顾。闪存器的历史沿革“闪存(Flash)”这一名称,是源于该存储器件只需单步操作即能擦除其中所有内容的能力。军用装备很早就从这一能力中获益,军用装备都包含机密信息,一旦即将落入敌手,就应该迅速予以破坏。与EEPROM类似,Flash的数据存储也是通过向其晶体管栅区存入电荷来实现…     

Surface modification and functionalization of electroactive polymer films via grafting of polyelectrolyte,polyampholyte and polymeric acids

Films of electroactive polymers, such as polyaniline (PAN) in its emeraldine base form, and poly(3-alkylthiophene), poly(3-hexylthiophene) (P6TH), poly(3-octylthiophene) (P8TH), and poly(3-dodecylthiophene) (P12TH) can be readily functionalized via thermal or near ultraviolet-light-induced surface graft copolymerization with monomers of polyelectrolyte, polyampholyte and polymeric acids. The monomers used in the present work include dimethyl sulphate quaternized dimethylamino-ethylmethacrylate (DMAEM·C₂H₆SO₄), 3-dimethyl(methacryloyloxyethyl)ammonium propane sulphonate (DMAPS), acrylic acid (AAc) and a sodium salt of styrene sulphonic acid (NaSS). The surface structures and compositions of the electroactive polymer films after functionalization via graft copolymerization were characterized by angle-resolved X-ray photoelectron spectroscopy. Graft copolymerization of poly(3-alkylthiophene) films, but not PAN films, with the hydrophilic monomers readily results in a stratified surface microstructure arising from the migration of the hydrophilic graft chains beneath a thin surface layer which is much richer in the substrate chains. On the other hand, graft copolymerization of PAN films with AAc and NaSS readily gives rise to a self-protonated (and thus conductive) surface structure.     

Correlation study on infrared thermography and nerve root signs in lumbar intervertebral disk herniation patient: a short report

OBJECTIVE: To determine whether infrared skin thermography is an objective measurement reflecting the seriousness of nerve root irritation in lumbar disk herniation patients. DESIGN: Quantified nerve root signs by physical examination were collected from the patients along with the infrared skin temperature measurement on the lumbosacral region and posterior part of thighs. A correlation study was applied to observe the relation between the nerve root signs and the skin temperature before a successful conservative treatment (mainly spine manipulation), and between the alteration of nerve root signs and that of skin temperature after the treatment. SETTING: Hospitalized care. PATIENTS: Twenty-seven hospitalized samples with computed tomography or magnetic resonance approval were consecutively selected during the latter half of 1990. MAIN OUTCOME MEASURE: Changes in nerve root signs. RESULTS: The temperature difference between a troubled thigh and healthy one is significantly correlated to the score of the nerve root signs before the treatment; and the reduction of temperature difference between two thighs is also significantly correlated with decreasing score of nerve root signs after the treatment. The correlation between the temperature difference on the left and right sides of the lumbosacral region and the nerve root signs before the treatment is insignificant; and the variation of the temperature difference of the same region after the treatment is not correlated with the decreasing score of the nerve root signs. CONCLUSION: Infrared skin thermography of lower extremities might be an objective sign in signaling the soothing process of the nerve root irritation in lumbar disk herniation patients, which may help a doctor in checking the responses of the patient to treatment.