1/f noise in large-area Hg<Subscript>1−x</Subscript>Cd<Subscript>x</Subscript>Te photodiodes

The 1/f noise in photovoltaic (PV) molecular-beam epitaxy (MBE)-grown Hg_1−xCd_xTe double-layer planar heterostructure (DLPH) large-area detectors is a critical noise component with the potential to limit sensitivity of the cross-track infrared sounder (CrIS) instrument. Therefore, an understanding of the origins and mechanisms of noise currents in these PV detectors is of great importance. Excess low-frequency noise has been measured on a number of 1000-μm-diameter active-area detectors of varying “quality” (i.e., having a wide range of I-V characteristics at 78 K). The 1/f noise was measured as a function of cut-off wavelength under illuminated conditions. For short-wave infrared (SWIR) detectors at 98 K, minimal 1/f noise was measured when the total current was dominated by diffusion with white noise spectral density in the mid-10⁻¹⁵A/Hz^1/2 range. For SWIR detectors dominated by other than diffusion current, the ratio, α, of the noise current in unit bandwidth i_n(f = 1 Hz, V_d = −60 mV, and Δf = 1 Hz) to dark current I_d(V_d = −60 mV) was α_SW-d = i_n/I_d ∼ 1 × 10⁻³. The SWIR detectors measured at 0 mV under illuminated conditions had median α_SW-P = i_n/I_ph ∼ 7 × 10⁻⁶. For mid-wave infrared (MWIR) detectors, α_MW-d = i_n/I_d ∼ 2 × 10⁻⁴, due to tunneling current contributions to the 1/f noise. Measurements on forty-nine 1000-μm-diameter MWIR detectors under illuminated conditions at 98 K and −60 mV bias resulted in α_MW-P = i_n/I_ph = 4.16 ± 1.69 × 10⁻⁶. A significant point to note is that the photo-induced noise spectra are nearly identical at 0 mV and 100 mV reverse bias, with a noise-current-to-photocurrent ratio, α_MW-P, in the mid 10⁻⁶ range. For long-wave infrared (LWIR) detectors measured at 78 K, the ratio, α_LW-d = i_n/I_d ∼ 6 × 10⁻⁶, for the best performers. The majority of the LWIR detectors exhibited α_LW-d on the order of 2 × 10⁻⁵. The photo-induced 1/f noise had α_LW-P = i_n/I_ph ∼ 5 × 10⁻⁶. The value of the noise-current-to-dark-current ratio, α appears to increase with increasing bandgap. It is not clear if this is due to different current mechanisms impacting 1/f noise performance. Measurements on detectors of different bandgaps are needed at temperatures where diffusion current is the dominant current. Excess low-frequency noise measurements made as a function of detector reverse bias indicate 1/f noise may result primarily from the dominant current mechanism at each particular bias. The 1/f noise was not a direct function of the applied bias.     

A description of general health risks in adult liver transplant recipients

The focus of posttransplant care and clinical research has been on the management of rejection and short-term side effects associated with immunosuppressive therapy. Long-term side effects have only recently been recognized as potential health problems in liver transplant recipients. The aim of this pilot study was to determine the feasibility of using the Healthier People Version 4.0 Health Risk Appraisal as a tool for identifying existing and potential risk factors for premature disease and death among asymptomatic liver transplant recipients and to describe health risks in adult liver transplant recipients. The sample consisted of 50 adult first-time liver transplant recipients. It was found that this tool highlights health risks affecting life expectancy and pinpoints risks that an individual can control. It also provides practitioners with information necessary to design appropriate prevention and health promotion strategies to assure better health and quality of life for patients following liver transplantation.     

Evidence for the presence of sodium- and potassium-dependent adenosine triphosphatase alpha1 and beta1 subunit isoforms and their probable role in blastocyst expansion in the preattachment horse conceptus

Two Caribbean hair sheep breeds, the St. Croix (SC) and Barbados Blackbelly (BB), are found in the United States, and the SC has led to the development of the Katahdin (K), a synthetic breed of hair sheep. These breeds have mature ewe BW ranging from 32 to 54 kg (for BB and SC) and from 55 to 73 kg (K). Hair sheep and hair sheep crosses have lower rectal temperatures and respiration rates than wool breeds and a lower DMI and water intake. There are indications of increased resistance to internal parasites in hair sheep. Although hair sheep are seasonal breeders under U.S. photoperiodic conditions, they tend to perform better under accelerated lambing systems than traditional wool breeds. Fertility, prolificacy, and lamb survival is high in BB and SC, but hair x wool crossbred ewes tend to have a higher level of fertility than hair and wool parent breeds. Ewe productivity is also higher in hair x wool crosses than in wool crosses, particularly when adjusted for ewe BW or under accelerated lambing systems. Hair sheep have a lower ADG and intake of high-energy diets, as well as a lower gain/feed ratio, than wool breeds. Growth rates tend to be higher in SC than in BB. Differences in carcass characteristics are inconsistent between hair and wool breeds. Production characteristics of hair sheep, particularly hair x wool crosses, make them suitable for low-input, sustainable production systems that do not require high growth rates and large carcasses. There is a need to preserve the existing U.S. hair sheep germplasm base in support of such systems.     

Displacement control crack-growth instability in an elastic-softening material

The criterion for crack growth instability in an elastic-softening material that is subjected to displacement control loading conditions is examined. A theoretical analysis of the model of a solid containing two symmetrically situated deep cracks and with tensile loading of the remaining ligament, defines the criterion for crack growth instability. The criterion is expressed in terms of the material's softening characteristics and the solid's geometrical parameters. The analysis covers the complete spectrum of material behaviour from the case where the softening zone is very small to the case where instability does not occur until the softening zone traverses the ligament between the crack tips.     

Tumor necrosis factor alpha interferes with the cell cycle of normal and papillomavirus-immortalized human keratinocytes

We have shown that normal and human papillomavirus (HPV) type 16 immortalized human foreskin keratinocytes are growth inhibited by tumor necrosis factor alpha (TNF-alpha), whereas HPV-18- and SV40-immortalized keratinocytes are resistant to this cytokine (1). In this report, we investigated the expression of mitotic regulatory proteins, such as cyclin A, cyclin B, and p34cdc2. After exposure to TNF-alpha, normal and HPV-16-immortalized cells exhibited a dramatic decrease in the expression of these proteins. In contrast, no alteration in the levels of these proteins was observed after treatment of the resistant cell lines, as well as two HPV-positive cervical carcinoma cell lines. Expression of cyclin E does not seem to be modulated by TNF-alpha in any of the cells tested. On the other hand, cyclin D1, expression is slightly increased in normal keratinocytes and in the HPV-16-immortalized cells, whereas no alteration was observed in the HPV-18-transfected cells. The phosphorylation state of pRb correlated with cell growth; sensitive cells, which accumulate in G0-G1, after exposure to TNF-alpha, exhibited an accumulation of hypophosphorylated pRb, whereas no effect on pRb phosphorylation was observed for HPV-18-immortalized cells. These results clearly correlate with TNF-alpha-induced growth arrest in G0-G1.     

“Metallisation” of oxide surfaces observed by in situ high-resolution electron microscopy

Intense irradiation (25–40 A/cm²) at intermediate energy (400 keV) has been found to cause “metallisation” of tungsten oxide and titanium niobate crystal surfaces. The possible mechanisms and the likely consequences for high-resolution imaging of clean oxide surfaces are briefly discussed.