Objectives: The aim of this study was to evaluate the effect of bioactive glass–ceramic particles (Biosilicate®) addition on surface nanoroughness and topography of Resin-modified glass ionomer cements (RMGICs).
Methods: Experimental materials were made by incorporating 2 wt% of Biosilicate® into Fuji II LC® (FL) and Vitremer® (VT) powders. Disks of RMGICs (with and without Biosilicate®) measuring 0.5 cm (diameter) × 0.5 mm (thickness) were fabricated and polished. Samples were stored at 37 °C in dry or immersed in distilled water for 30 days. Digital images (20 × 20 μm) from the surfaces were obtained by means of an atomic force microscopy. Three images were acquired for each sample, and four nanoroughness measurements were performed in each image. Nanoroughness (Ra, nm) was assessed by Nanoscope Software V7. Data were analyzed with ANOVA and Student–Newman–Keuls multiple comparisons (p < 0.05). SEM images were obtained for surface topography analysis.
Results: FL was significantly rougher than VT (p < 0.05) in wet and dry conditions. The addition of Biosilicate® increased the surface roughness in VT and decreased in FL, regardless of the storage media (p ≤ 0.05). No differences existed between materials and storage conditions after Biosilicate® addition. Significance: The Biosilicate® particles addition produced changes on the surface nanoroughness of the RMGICs. These changes depended on the particles size of the original cements in dry conditions. In water storage, dissolution of the Biosilicate® particles, a silica-rich gel formation, and a hydroxyl carbonate apatite precipitation on the surface of the materials changed the nanoroughness surface. FL was the roughest in both conditions.
Significance: The Biosilicate® particles addition produced changes on the surface nanoroughness of the RMGICs. These changes depended on the particles size of the original cements in dry conditions. In water storage, dissolution of the Biosilicate® particles, a silica-rich gel formation, and a hydroxyl carbonate apatite precipitation on the surface of the materials changed the nanoroughness surface. FL was the roughest in both conditions. 相似文献
Strong glass-ceramics (GCs) have been envisaged and widely researched for various applications, including large architectural panels, ballistic impact protection, bioactive medical implants, and odontological prostheses. Here, we report on the development and characterization of a novel hard, strong and tough enstatite-zirconia (MgSiO3-ZrO2) glass-ceramic derived from a 51SiO2–35MgO–6Na2O–4ZrO2–4TiO2 (mol%) glass. The best GC was developed by treating glass samples for nucleation at 700°C for 12 hours, followed by crystal growth at 1090°C for 3 minutes. It was characterized by X-ray fluorescence (XRF), differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HR-TEM), and contained plate-like enstatite, zirconia, and Ti-containing crystals. We investigated the nucleating ability of ZrO2 and TiO2 in inducing internal nucleation. In the early stage of crystallization, enstatite spherulites were observed, which were precipitated by heterogeneous nucleation on previously nucleated ZrO2 nano-crystals. At more advanced stages, at high temperatures, they transformed into plate-like crystals. The ball-on-three-balls strength, elastic modulus, and Vickers micro-hardness of the GC are 323 ± 26 MPa, 146 ± 13 GPa, and 6.9 ± 0.1 GPa (load = 5N), respectively. The indentation (KC), single-edge notched beam bending (KIC), and crack tip (Ktip) fracture toughness are 2.8 ± 0.6 MP.m0.5, 2.2 ± 0.3 MP.m0.5, 1.9 ± 0.3 MP.m0.5, respectively. The crack propagation profile after a controlled Vickers indentation was quite intricate. The enstatite and zirconia crystals enhanced crack deflection, bridging and branching, hindering crack propagation. According to the ISO 6872 for dental materials, the chemical solubility of our GC is 80 ± 5 μg/cm2. Due to this positive combination of high strength, toughness, hardness, and chemical durability, this new glass-ceramic is envisioned as a candidate for several applications and could be further developed for memory disc substrates, architectural cladding and tiles, ceramic glazes, and dental materials. 相似文献
It is known that the H-indexes of individuals, research groups, institutions, scientific journals, and countries strongly depend on the field of study, slowly increase with the number of publications, N, and can be described by empirical power-law functions of the type H?=?C?×?Na (C and a are constants and depend on the specific field being analyzed). In this paper, we use this function and propose a new index [Montazerian–Zanotto–Eckert (MZE)], which is normalized by the number of publications and typically varies from ??1 to +?1, to characterize the relative standing of a research group, institution, or author to those of his/her peer groups. Due to the rich statistics available, as an example, here we analyzed and tested the new parameter against the citation-related performance (H-index) of countries. We found that the MZE index readily distinguishes between countries that stand above or below the average (for any given number of publications). Generally, publications of countries with a positive MZE index are more interesting or visible than the average. Analyzing publication output in this manner instead of the H-index allows for a less biased comparison between researchers, journals, universities, or countries for any particular combination of H-index and publication output.
Bioactive glasses and glass-ceramics (GCs) effectively regenerate bone tissue, however most GCs show improved mechanical properties. In this work, we developed and tested a rarely studied bioactive glass composition (24.4K2O-26.9CaO-46.1SiO2-2.6P2O5 mol%, identified as 45S5-K) with different particle sizes and heating rates to obtain a sintered GC that combines good fracture strength, low elastic modulus, and bioactivity. We analyzed the influence of the sintering processing conditions in the elastic modulus, Vickers microhardness, density, and crystal phase formation in the GC. The best GC shows improved properties compared with its parent glass. This glass achieves a good densification degree with a two-step viscous flow sintering approach and the resulting GC shows as high bioactivity as that of the standard 45S5 Bioglass®. Furthermore, the GC elastic modulus (56 GPa) is relatively low, minimizing stress shielding. Therefore, we unveiled the glass sintering behavior with concurrent crystallization of this complex bioactive glass composition and developed a potential GC for bone regeneration. 相似文献
Dense (~98.5%), lithium aluminum silicate glass‐ceramics were obtained via the sinter‐crystallization of glass particle compacts at relatively low temperatures, that is, 790–875°C. The effect of P2O5 on the glass‐ceramics' sinter‐crystallization behavior was evaluated. We found that P2O5 does not modify the surface crystallization mechanism but instead delays the crystallization kinetics, which facilitates viscous flow sintering. Our glass‐ceramics had virgilite (LixAlxSi3‐xO6; 0.5 < x < 1), a crystal size <1 μm, and a linear thermal expansion coefficient of 2.1 × 10?6°C?1 in the temperature range 40–500°C. The overall heat treatment to obtain these GCs was quite short, at ~25 min. 相似文献
Summary In this short paper I propose a combination of qualitative and quantitative criteria to classify the quality, talent and creative
thinking of the scientists of the “hard”, medical and biological sciences. The rationale for the proposed classification is
to focus on the impact and overall achievements of each individual scientist and on how he is perceived by his own community.
This new method is probably more complete than any other form of traditional judgment of a scientist's achievements and reputation,
and may be useful for funding agencies, editors of scientific journals, science academies, universities, and research laboratories. 相似文献
The nucleation kinetics of barium disilicate spherulites were determined by optical microscopy in BaO-SiO2 glasses containing 27.0 to 33.3 mol % BaO for isothermal treatments at 718 to 760‡ C. Amorphous phase separation in two glasses
was studied by small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). The average diameter, number
and surface area of amorphous droplets were obtained by SAXS as a function of time at 743 and 760‡ C. In glasses not showing
amorphous phase separation the crystal nucleation rate,I, was constant at a given temperature. In glasses undergoing phase separation,I increased with time approaching a constant value, which was identical for different phase-separated glasses. There was a
striking correlation between the time to reach a constantI and the time required to attain the equilibrium composition of the amorphous (baria-rich) matrix phase, as revealed by a
constant integrated SAXS intensity. The crystal nucleation rate,I, depended primarily on the composition of the baria-rich phase. There was no apparent relationship betweenI and the surface area or number of droplets from SAXS. However, possible evidence of additional crystal nucleation at droplet
interfaces was found, although the effect was small. Viscosities and crystal growth rates for the phase-separated glasses
are also discussed. 相似文献