Improving Short-Circuit Current Capacity, Resistance, and Breaking Load of OPGW Constructions by Modifying Aluminium Alloy With AlB2

This article presents a method that can be applied to molten AA-6101 alloy to improve electrical properties of the aluminium part of the optical ground wire (OPGW) used in overhead transmission lines to protect phase conductors from lightning strike and to transmit signals and data. AA-6101 alloy in casting of the log as 6 m length and 178 mm diameter for extrusion has been inoculated by AlB₂ to decrease detrimental effects of Cr, Ti, V, and Zr on the conductivity of the material. After inoculation, improved billets were extruded as 9.5 mm diameter feedstock. Required wires drawn from the feedstock according to the construction types of OPGW to be tested were exposed to aging at 175°C, 6 h (T-8). Upon completion of the back-twist and performing-type stranding process, resistance, and short-circuit current capacity and breaking load of the OPGW 88/44 constructions with other metal combinations have been examined and tested to show improvement. Results are summarized in tables and graphically.     

Thermomechanical behaviour of composites

This paper derives the governing equations for the thermomechanical behaviour of composites. When the basic equations for the thermoelastic behaviour of solids were first derived in the nineteenth century several approximations were made. The effect of these assumptions are discussed and illustrated by the results of a simple laboratory test. The implications of this work on the analysis of impact damaged laminates are then discussed.     

Development of Stretch Solder Interconnections for Wafer Level Packaging

A wafer level packaging technique has been developed with an inherent advantage of good solder joint co-planarity suitable for wafer level testing. A suitable weak metallization scheme has also been established for the detachment process. During the fabrication process, the compliancy of the solder joint is enhanced through stretching to achieve a small shape factor. Thermal cycling reliability of these hourglass-shaped, stretch solder interconnections has been found to be considerably better than that of the conventional spherical-shaped solder bumps.     

Anatomical suitability of abdominal aortic aneurysms for endovascular repair

BACKGROUND: Aortic aneurysm anatomy is crucial when considering patients for endovascular repair. The aim of this study was to determine the proportion of patients with aortic aneurysm suitable for endovascular repair with three different graft-stent systems. METHODS: Spiral computed tomographic angiography was used to assess the anatomy of 154 abdominal aortic aneurysms. Measurements were made of aneurysm neck length and diameter, renal artery to aortic bifurcation length, common iliac artery diameter and length, and external iliac artery diameter. Aneurysms were assessed for anatomical suitability for currently available aortoaortic, aortobi-iliac and aortouni-iliac devices. RESULTS: Six patients (4 per cent) had a distal aortic neck suitable for implantation of a straight aortic graft. Fifteen patients (10 per cent) had arterial anatomy suitable for implantation of a bifurcated graft and 85 (55 per cent) patients were suitable for endovascular repair with an aortouni-iliac graft. The primary reasons for unsuitability were: proximal neck length less than 1.5 cm (44 patients), proximal neck diameter greater than 3.0 cm (12), and angulation of the proximal neck (three). A further ten patients were considered unsuitable for an aortouni-iliac graft because of bilateral common iliac artery aneurysms (four), tortuous iliac arteries (four) and narrow external iliac arteries (two). CONCLUSION: The aortouni-iliac device has the widest applicability of the currently available endovascular systems but open repair remains the only option for a large proportion of patients.     

Analysis of composite laminates with transverse cracks

The analysis of the behaviour of composite laminates with general balanced lay-up sequences and containing distributed transverse cracks is discussed and demonstrated in this paper. It is shown that a constitutive model of damage for composites, which has been successfully used to analyse the effects of uniformly distributed transverse cracks in cross-ply laminates, can be readily extended to the analysis of uniformly distributed transverse cracks in more general symmetric laminates. The further extension of the theory to non-uniformly distributed damage can be achieved by finite element analysis. It is shown that the finite element implementation of the theory is particularly simple since the contribution of the damage to the overall behaviour can be incorporated into the force vectors.     

Simulation and experimental analyses of electromagnetic transients behaviors of lightning surge on vertical conductors

Simulation of very fast surge phenomena in a three-dimensional (3-D) structure requires a method based on Maxwell's equations, such as the finite-difference time-domain (FDTD) method or the method of moments, because circuit-equation-based methods cannot handle the phenomena. This paper uses a method of thin-wire representation of the vertical conductor system for the FDTD method which is suitable for the 3-D surge simulation. The thin-wire representation is indispensable to simulate electromagnetic surges on wires or steel frames in which the radius is smaller than a discretized space step used in the FDTD simulation. In this paper, a general surge analysis program named the virtual surge test lab based on the Maxwell's equations formulated by the FDTD method, is used to simulate the surge phenomena of a vertical conductor, including the effects of horizontal wave incidence and vertical wave incidence. Experimental results on the reduced scale model have been presented in order to compare among the simulation results by the FDTD method and the results using numerical electromagnetic code based on the MoM.     

Swelling properties of chemically modified oil palm empty fruit bunch based polyurethane composites

In this study, the diffusion of various types of solvent in oil palm empty fruit bunch/polyurethane composites, produced from chemically modified empty fruit bunches, was investigated. The solubility parameters and polymer–solvent interaction parameters of the produced composites were determined. The void contents of the composites were also determined before swelling tests to eliminate the free solvent present in the system. From the results obtained, we found that the diffusion of the solvents was dependent on the compatible group available and the voids present in the system. The solubility parameters of the empty fruit bunch/polyurethane composites with different degrees of chemical modification were 11.6 and 11.7 (cal/cm^?3)^1/2. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Enhancing electrochromic properties of polypyrrole by silsesquioxane nanocages

A new monomer, octa(thiophenephenyl)silsesquioxane (OThiophenePS) was synthesized via click chemistry. The chemical structure of OThiophenePS was characterized by nuclear magnetic resonance (¹H NMR) and Fourier transform infrared (FT-IR) spectroscopies. Electrochemical polymerization of pyrrole with OThiophenePS was performed resulting in polypyrrole-attached, polyhedral oligomeric silsesquioxane (OPS–PPy). The spectroelectrochemical studies show that the electrochromic properties of (OPS–PPy) are superior to those of polypyrrole (PPy). This great improvement can be attributed to the more accessible doping sites and the facile ion movement during the redox switching brought by the loose packing of the PPy chains.