HACCP在保健食品西洋参口服液生产中的应用

保健食品行业GMP的实施有利HACCP的应用推广。本文应用HACCP于传统保健食品西洋参口服液生产过程中，将生产及加工过程中危害因素降最低限度，以确保产品的质量与安全。     

Processor Utilization Bounds for Real-Time Systems With Precedence Constraints

This paper presents a novel approach to computing tight upper bounds on the processor utilization for general real-time systems where tasks are composed of subtasks and precedence constraints may exist among subtasks of the same task. By careful analysis of preemption effects among tasks, the problem is formulated as a set of linear programming (LP) problems. Observations are made to reduce the number of LP problem instances required to be solved, which greatly improves the computation time of the utilization bounds. Furthermore, additional constraints are allowed to be included under certain circumstances to improve the quality of the bounds.     

Na_2O－Al_2O_3－SiO_2系统霞石微晶玻璃机械强度的研究

霞石微晶玻璃是一种高强度的新型无机非金属材料．本文以Ｎａ２Ｏ－Ａｌ２Ｏ３－ＳｉＯ２系统为基础，引入晶核剂和复合澄清剂，经高温熔制和两步热处理制备的霞石微晶玻璃，具有较高的抗压和抗折强度．结果表明，霞石微晶玻璃的机械强度与霞石晶体及试样的结构有关，也与微晶化热处理的时间有关。     

Monolithic Catalysts with Low Noble-Metal Content for Exhaust Purification of Small Gasoline Engines

A series of low noble-metal coment monolithic catalysts for exhaust purification of small gasoline engines was investigated, and it was found that the Pt/Rh-OSM/Al2O3 （where OSM was oxygen storage material） catalyst with Ce0.5Zr0.5-MnOx（3%MnOx） OSM held low light-off temperature for CO, HC, and NO; quite wide three-way window, and outstanding thermal stability. The catalyst could efficiently comrol exhaust emission of small gasoline engines.     

A sequencing problem for a mixed-model assembly line in a JIT production system

In an assembly line of a just-in-time (JIT) production system, workers have the power and the responsibility to stop the line when they fail to complete their operations within their work zones. This paper deals with a sequencing problem for the mixed-model assembly conveyor line in the JIT production system. In some environment, the most important criterion is the line stoppage rather than the variation of production rates. The problem is to find an optimal sequence of units that minimizes the total line stoppage time. Lower and upper bounds of the total line stoppage time are derived and the branch-and-bound method is applied to the problem. A numerical example is given.     

坦克炮控系统摩擦扰动补偿研究

针对坦克水平向炮控伺服系统中存在的摩擦不确定因素及未建模动态,首先建立水平向炮控伺服系统的数学模型,将摩擦扰动和未建模动态视为一个综合扰动项,然后利用扩张状态观测器对综合扰动项进行观测和补偿,并将扩张状态观测器(ESO)补偿回路作为经典PID控制方法的内回路,实现ESO-PID的复合控制;最后对所用方法进行仿真,结果表明,在原有控制方法的基础上设计控制器,集合了PID控制算法的"被动抗扰"和自抗扰控制方法中扩张状态观测器的"主动抗扰"特性,能够在保持控制系统原有特性的基础上大幅度提高炮控系统的稳定精度以及低速性能。     

Enhanced Photoelectrochemical Performance of Hematite Photoanode by Decorating NiCoP Nanoparticles Through a Facile Spin Coating Method

Catalysis Letters - Hematite (α-Fe2O3) is a potential photoanode material for photoelectrochemical (PEC) water splitting, but its short hole diffusion length and low water oxidation kinetics...     

锰对低铬白口铸铁组织及硬度的影响

系统研究了Ｍｎ对水平连铸低铬白口铸铁铸态及正火态组织和硬度的影响。结果表明，Ｍｎ＞２．０％之后对组织有较大影响，由于出现（Ｍ＋Ａ）组成物，使基体硬度显著提高，这将大大改善了低铬白口铸铁中碳化物与基体硬度的相对关系。试验证实，Ｍｎ＞３％之后明显改善硬度分布均匀性。还讨论了使低铬锰白口铸铁具有最佳综合性能的合理含Ｍｎ量范围     

新型组合式碳化法生产纳米级碳酸钙新工艺

介绍了组合式碳化新工艺理论依据、工艺特点、设备结构及与传统方法对比情况。新型组合式碳化新工艺具有设备结构简单、操作方便、易于实现自控操作等特点,产品质量稳定,同一套设备控制不同工艺条件,可生产多种晶型、不同粒度、不同性质的纳米级或微米级各类碳酸钙产品,低温能耗低、投资少,连续生产,生产效率高、单塔生产能力大,符合大型化生产需求。